2021-1-capstone-design1 / JJS_Project2

Go to a project
Toggle navigation Toggle navigation pinning
이충섭
61f3686b 1 parent 9c485c59

test : change location

Inline Side-by-side
Showing 3 changed files with 1 additions and 2013 deletions
/****************************************************************************
*
* Copyright (c) 2015-2021 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include "EKF2.hpp"
#include <iostream>
using namespace time_literals;
using math::constrain;
using matrix::Eulerf;
using matrix::Quatf;
using matrix::Vector3f;
pthread_mutex_t ekf2_module_mutex = PTHREAD_MUTEX_INITIALIZER;
static px4::atomic<EKF2 *> _objects[EKF2_MAX_INSTANCES] {};
#if !defined(CONSTRAINED_FLASH)
static px4::atomic<EKF2Selector *> _ekf2_selector {nullptr};
#endif // !CONSTRAINED_FLASH
static int hold=0;
EKF2::EKF2(bool multi_mode, const px4::wq_config_t &config, bool replay_mode):
ModuleParams(nullptr),
ScheduledWorkItem(MODULE_NAME, config),
_replay_mode(replay_mode && !multi_mode),
_multi_mode(multi_mode),
_instance(multi_mode ? -1 : 0),
_attitude_pub(multi_mode ? ORB_ID(estimator_attitude) : ORB_ID(vehicle_attitude)),
_local_position_pub(multi_mode ? ORB_ID(estimator_local_position) : ORB_ID(vehicle_local_position)),
_global_position_pub(multi_mode ? ORB_ID(estimator_global_position) : ORB_ID(vehicle_global_position)),
_odometry_pub(multi_mode ? ORB_ID(estimator_odometry) : ORB_ID(vehicle_odometry)),
_wind_pub(multi_mode ? ORB_ID(estimator_wind) : ORB_ID(wind)),
_params(_ekf.getParamHandle()),
_param_ekf2_min_obs_dt(_params->sensor_interval_min_ms),
_param_ekf2_mag_delay(_params->mag_delay_ms),
_param_ekf2_baro_delay(_params->baro_delay_ms),
_param_ekf2_gps_delay(_params->gps_delay_ms),
_param_ekf2_of_delay(_params->flow_delay_ms),
_param_ekf2_rng_delay(_params->range_delay_ms),
_param_ekf2_asp_delay(_params->airspeed_delay_ms),
_param_ekf2_ev_delay(_params->ev_delay_ms),
_param_ekf2_avel_delay(_params->auxvel_delay_ms),
_param_ekf2_gyr_noise(_params->gyro_noise),
_param_ekf2_acc_noise(_params->accel_noise),
_param_ekf2_gyr_b_noise(_params->gyro_bias_p_noise),
_param_ekf2_acc_b_noise(_params->accel_bias_p_noise),
_param_ekf2_mag_e_noise(_params->mage_p_noise),
_param_ekf2_mag_b_noise(_params->magb_p_noise),
_param_ekf2_wind_noise(_params->wind_vel_p_noise),
_param_ekf2_terr_noise(_params->terrain_p_noise),
_param_ekf2_terr_grad(_params->terrain_gradient),
_param_ekf2_gps_v_noise(_params->gps_vel_noise),
_param_ekf2_gps_p_noise(_params->gps_pos_noise),
_param_ekf2_noaid_noise(_params->pos_noaid_noise),
_param_ekf2_baro_noise(_params->baro_noise),
_param_ekf2_baro_gate(_params->baro_innov_gate),
_param_ekf2_gnd_eff_dz(_params->gnd_effect_deadzone),
_param_ekf2_gnd_max_hgt(_params->gnd_effect_max_hgt),
_param_ekf2_gps_p_gate(_params->gps_pos_innov_gate),
_param_ekf2_gps_v_gate(_params->gps_vel_innov_gate),
_param_ekf2_tas_gate(_params->tas_innov_gate),
_param_ekf2_head_noise(_params->mag_heading_noise),
_param_ekf2_mag_noise(_params->mag_noise),
_param_ekf2_eas_noise(_params->eas_noise),
_param_ekf2_beta_gate(_params->beta_innov_gate),
_param_ekf2_beta_noise(_params->beta_noise),
_param_ekf2_mag_decl(_params->mag_declination_deg),
_param_ekf2_hdg_gate(_params->heading_innov_gate),
_param_ekf2_mag_gate(_params->mag_innov_gate),
_param_ekf2_decl_type(_params->mag_declination_source),
_param_ekf2_mag_type(_params->mag_fusion_type),
_param_ekf2_mag_acclim(_params->mag_acc_gate),
_param_ekf2_mag_yawlim(_params->mag_yaw_rate_gate),
_param_ekf2_gps_check(_params->gps_check_mask),
_param_ekf2_req_eph(_params->req_hacc),
_param_ekf2_req_epv(_params->req_vacc),
_param_ekf2_req_sacc(_params->req_sacc),
_param_ekf2_req_nsats(_params->req_nsats),
_param_ekf2_req_pdop(_params->req_pdop),
_param_ekf2_req_hdrift(_params->req_hdrift),
_param_ekf2_req_vdrift(_params->req_vdrift),
_param_ekf2_aid_mask(_params->fusion_mode),
_param_ekf2_hgt_mode(_params->vdist_sensor_type),
_param_ekf2_terr_mask(_params->terrain_fusion_mode),
_param_ekf2_noaid_tout(_params->valid_timeout_max),
_param_ekf2_rng_noise(_params->range_noise),
_param_ekf2_rng_sfe(_params->range_noise_scaler),
_param_ekf2_rng_gate(_params->range_innov_gate),
_param_ekf2_min_rng(_params->rng_gnd_clearance),
_param_ekf2_rng_pitch(_params->rng_sens_pitch),
_param_ekf2_rng_aid(_params->range_aid),
_param_ekf2_rng_a_vmax(_params->max_vel_for_range_aid),
_param_ekf2_rng_a_hmax(_params->max_hagl_for_range_aid),
_param_ekf2_rng_a_igate(_params->range_aid_innov_gate),
_param_ekf2_rng_qlty_t(_params->range_valid_quality_s),
_param_ekf2_evv_gate(_params->ev_vel_innov_gate),
_param_ekf2_evp_gate(_params->ev_pos_innov_gate),
_param_ekf2_of_n_min(_params->flow_noise),
_param_ekf2_of_n_max(_params->flow_noise_qual_min),
_param_ekf2_of_qmin(_params->flow_qual_min),
_param_ekf2_of_gate(_params->flow_innov_gate),
_param_ekf2_imu_pos_x(_params->imu_pos_body(0)),
_param_ekf2_imu_pos_y(_params->imu_pos_body(1)),
_param_ekf2_imu_pos_z(_params->imu_pos_body(2)),
_param_ekf2_gps_pos_x(_params->gps_pos_body(0)),
_param_ekf2_gps_pos_y(_params->gps_pos_body(1)),
_param_ekf2_gps_pos_z(_params->gps_pos_body(2)),
_param_ekf2_rng_pos_x(_params->rng_pos_body(0)),
_param_ekf2_rng_pos_y(_params->rng_pos_body(1)),
_param_ekf2_rng_pos_z(_params->rng_pos_body(2)),
_param_ekf2_of_pos_x(_params->flow_pos_body(0)),
_param_ekf2_of_pos_y(_params->flow_pos_body(1)),
_param_ekf2_of_pos_z(_params->flow_pos_body(2)),
_param_ekf2_ev_pos_x(_params->ev_pos_body(0)),
_param_ekf2_ev_pos_y(_params->ev_pos_body(1)),
_param_ekf2_ev_pos_z(_params->ev_pos_body(2)),
_param_ekf2_tau_vel(_params->vel_Tau),
_param_ekf2_tau_pos(_params->pos_Tau),
_param_ekf2_gbias_init(_params->switch_on_gyro_bias),
_param_ekf2_abias_init(_params->switch_on_accel_bias),
_param_ekf2_angerr_init(_params->initial_tilt_err),
_param_ekf2_abl_lim(_params->acc_bias_lim),
_param_ekf2_abl_acclim(_params->acc_bias_learn_acc_lim),
_param_ekf2_abl_gyrlim(_params->acc_bias_learn_gyr_lim),
_param_ekf2_abl_tau(_params->acc_bias_learn_tc),
_param_ekf2_drag_noise(_params->drag_noise),
_param_ekf2_bcoef_x(_params->bcoef_x),
_param_ekf2_bcoef_y(_params->bcoef_y),
_param_ekf2_aspd_max(_params->max_correction_airspeed),
_param_ekf2_pcoef_xp(_params->static_pressure_coef_xp),
_param_ekf2_pcoef_xn(_params->static_pressure_coef_xn),
_param_ekf2_pcoef_yp(_params->static_pressure_coef_yp),
_param_ekf2_pcoef_yn(_params->static_pressure_coef_yn),
_param_ekf2_pcoef_z(_params->static_pressure_coef_z),
_param_ekf2_move_test(_params->is_moving_scaler),
_param_ekf2_mag_check(_params->check_mag_strength),
_param_ekf2_synthetic_mag_z(_params->synthesize_mag_z),
_param_ekf2_gsf_tas_default(_params->EKFGSF_tas_default)
{
}
EKF2::~EKF2()
{
perf_free(_ecl_ekf_update_perf);
perf_free(_ecl_ekf_update_full_perf);
perf_free(_imu_missed_perf);
perf_free(_mag_missed_perf);
}
bool EKF2::multi_init(int imu, int mag)
{
// advertise immediately to ensure consistent uORB instance numbering
_attitude_pub.advertise();
_local_position_pub.advertise();
_global_position_pub.advertise();
_odometry_pub.advertise();
_wind_pub.advertise();
_ekf2_timestamps_pub.advertise();
_ekf_gps_drift_pub.advertise();
_estimator_innovation_test_ratios_pub.advertise();
_estimator_innovation_variances_pub.advertise();
_estimator_innovations_pub.advertise();
_estimator_optical_flow_vel_pub.advertise();
_estimator_sensor_bias_pub.advertise();
_estimator_states_pub.advertise();
_estimator_status_pub.advertise();
_estimator_status_flags_pub.advertise();
_estimator_visual_odometry_aligned_pub.advertised();
_yaw_est_pub.advertise();
bool changed_instance = _vehicle_imu_sub.ChangeInstance(imu) && _magnetometer_sub.ChangeInstance(mag);
const int status_instance = _estimator_states_pub.get_instance();
if ((status_instance >= 0) && changed_instance
&& (_attitude_pub.get_instance() == status_instance)
&& (_local_position_pub.get_instance() == status_instance)
&& (_global_position_pub.get_instance() == status_instance)) {
_instance = status_instance;
ScheduleNow();
return true;
}
PX4_ERR("publication instance problem: %d att: %d lpos: %d gpos: %d", status_instance,
_attitude_pub.get_instance(), _local_position_pub.get_instance(), _global_position_pub.get_instance());
return false;
}
int EKF2::print_status()
{
PX4_INFO_RAW("ekf2:%d attitude: %d, local position: %d, global position: %d\n", _instance, _ekf.attitude_valid(),
_ekf.local_position_is_valid(), _ekf.global_position_is_valid());
perf_print_counter(_ecl_ekf_update_perf);
perf_print_counter(_ecl_ekf_update_full_perf);
perf_print_counter(_imu_missed_perf);
if (_device_id_mag != 0) {
perf_print_counter(_mag_missed_perf);
}
return 0;
}
void EKF2::Run()
{
if (should_exit()) {
_sensor_combined_sub.unregisterCallback();
_vehicle_imu_sub.unregisterCallback();
return;
}
// check for parameter updates
if (_parameter_update_sub.updated() || !_callback_registered) {
// clear update
parameter_update_s pupdate;
_parameter_update_sub.copy(&pupdate);
// update parameters from storage
updateParams();
_ekf.set_min_required_gps_health_time(_param_ekf2_req_gps_h.get() * 1_s);
// The airspeed scale factor correcton is only available via parameter as used by the airspeed module
param_t param_aspd_scale = param_find("ASPD_SCALE");
if (param_aspd_scale != PARAM_INVALID) {
param_get(param_aspd_scale, &_airspeed_scale_factor);
}
}
if (!_callback_registered) {
if (_multi_mode) {
_callback_registered = _vehicle_imu_sub.registerCallback();
} else {
_callback_registered = _sensor_combined_sub.registerCallback();
}
if (!_callback_registered) {
PX4_WARN("%d - failed to register callback, retrying", _instance);
ScheduleDelayed(1_s);
return;
}
}
if (_vehicle_command_sub.updated()) {
vehicle_command_s vehicle_command;
if (_vehicle_command_sub.update(&vehicle_command)) {
if (vehicle_command.command == vehicle_command_s::VEHICLE_CMD_SET_GPS_GLOBAL_ORIGIN) {
if (!_ekf.control_status_flags().in_air) {
uint64_t origin_time {};
double latitude = vehicle_command.param5;
double longitude = vehicle_command.param6;
float altitude = vehicle_command.param7;
_ekf.setEkfGlobalOrigin(latitude, longitude, altitude);
// Validate the ekf origin status.
_ekf.getEkfGlobalOrigin(origin_time, latitude, longitude, altitude);
PX4_INFO("New NED origin (LLA): %3.10f, %3.10f, %4.3f\n", latitude, longitude, static_cast<double>(altitude));
}
}
}
}
bool imu_updated = false;
imuSample imu_sample_new {};
hrt_abstime imu_dt = 0; // for tracking time slip later
if (_multi_mode) {
const unsigned last_generation = _vehicle_imu_sub.get_last_generation();
vehicle_imu_s imu;
imu_updated = _vehicle_imu_sub.update(&imu);
if (imu_updated && (_vehicle_imu_sub.get_last_generation() != last_generation + 1)) {
perf_count(_imu_missed_perf);
PX4_DEBUG("%d - vehicle_imu lost, generation %d -> %d", _instance, last_generation,
_vehicle_imu_sub.get_last_generation());
}
imu_sample_new.time_us = imu.timestamp_sample;
imu_sample_new.delta_ang_dt = imu.delta_angle_dt * 1.e-6f;
imu_sample_new.delta_ang = Vector3f{imu.delta_angle};
imu_sample_new.delta_vel_dt = imu.delta_velocity_dt * 1.e-6f;
imu_sample_new.delta_vel = Vector3f{imu.delta_velocity};
if (imu.delta_velocity_clipping > 0) {
imu_sample_new.delta_vel_clipping[0] = imu.delta_velocity_clipping & vehicle_imu_s::CLIPPING_X;
imu_sample_new.delta_vel_clipping[1] = imu.delta_velocity_clipping & vehicle_imu_s::CLIPPING_Y;
imu_sample_new.delta_vel_clipping[2] = imu.delta_velocity_clipping & vehicle_imu_s::CLIPPING_Z;
}
imu_dt = imu.delta_angle_dt;
if ((_device_id_accel == 0) || (_device_id_gyro == 0)) {
_device_id_accel = imu.accel_device_id;
_device_id_gyro = imu.gyro_device_id;
_imu_calibration_count = imu.calibration_count;
} else if ((imu.calibration_count > _imu_calibration_count)
|| (imu.accel_device_id != _device_id_accel)
|| (imu.gyro_device_id != _device_id_gyro)) {
PX4_INFO("%d - resetting IMU bias", _instance);
_device_id_accel = imu.accel_device_id;
_device_id_gyro = imu.gyro_device_id;
_ekf.resetImuBias();
_imu_calibration_count = imu.calibration_count;
}
} else {
sensor_combined_s sensor_combined;
imu_updated = _sensor_combined_sub.update(&sensor_combined);
imu_sample_new.time_us = sensor_combined.timestamp;
imu_sample_new.delta_ang_dt = sensor_combined.gyro_integral_dt * 1.e-6f;
imu_sample_new.delta_ang = Vector3f{sensor_combined.gyro_rad} * imu_sample_new.delta_ang_dt;
imu_sample_new.delta_vel_dt = sensor_combined.accelerometer_integral_dt * 1.e-6f;
imu_sample_new.delta_vel = Vector3f{sensor_combined.accelerometer_m_s2} * imu_sample_new.delta_vel_dt;
if (sensor_combined.accelerometer_clipping > 0) {
imu_sample_new.delta_vel_clipping[0] = sensor_combined.accelerometer_clipping & sensor_combined_s::CLIPPING_X;
imu_sample_new.delta_vel_clipping[1] = sensor_combined.accelerometer_clipping & sensor_combined_s::CLIPPING_Y;
imu_sample_new.delta_vel_clipping[2] = sensor_combined.accelerometer_clipping & sensor_combined_s::CLIPPING_Z;
}
imu_dt = sensor_combined.gyro_integral_dt;
if (_sensor_selection_sub.updated() || (_device_id_accel == 0 || _device_id_gyro == 0)) {
sensor_selection_s sensor_selection;
if (_sensor_selection_sub.copy(&sensor_selection)) {
if (_device_id_accel != sensor_selection.accel_device_id) {
_ekf.resetAccelBias();
_device_id_accel = sensor_selection.accel_device_id;
}
if (_device_id_gyro != sensor_selection.gyro_device_id) {
_ekf.resetGyroBias();
_device_id_gyro = sensor_selection.gyro_device_id;
}
}
}
}
if (imu_updated) {
const hrt_abstime now = imu_sample_new.time_us;
// push imu data into estimator
_ekf.setIMUData(imu_sample_new);
PublishAttitude(now); // publish attitude immediately (uses quaternion from output predictor)
// integrate time to monitor time slippage
if (_start_time_us > 0) {
_integrated_time_us += imu_dt;
_last_time_slip_us = (imu_sample_new.time_us - _start_time_us) - _integrated_time_us;
} else {
_start_time_us = imu_sample_new.time_us;
_last_time_slip_us = 0;
}
// update all other topics if they have new data
if (_status_sub.updated()) {
vehicle_status_s vehicle_status;
if (_status_sub.copy(&vehicle_status)) {
const bool is_fixed_wing = (vehicle_status.vehicle_type == vehicle_status_s::VEHICLE_TYPE_FIXED_WING);
// only fuse synthetic sideslip measurements if conditions are met
_ekf.set_fuse_beta_flag(is_fixed_wing && (_param_ekf2_fuse_beta.get() == 1));
// let the EKF know if the vehicle motion is that of a fixed wing (forward flight only relative to wind)
_ekf.set_is_fixed_wing(is_fixed_wing);
_preflt_checker.setVehicleCanObserveHeadingInFlight(vehicle_status.vehicle_type !=
vehicle_status_s::VEHICLE_TYPE_ROTARY_WING);
_armed = (vehicle_status.arming_state == vehicle_status_s::ARMING_STATE_ARMED);
// update standby (arming state) flag
const bool standby = (vehicle_status.arming_state == vehicle_status_s::ARMING_STATE_STANDBY);
if (_standby != standby) {
_standby = standby;
// reset preflight checks if transitioning in or out of standby arming state
_preflt_checker.reset();
}
}
}
if (_vehicle_land_detected_sub.updated()) {
vehicle_land_detected_s vehicle_land_detected;
if (_vehicle_land_detected_sub.copy(&vehicle_land_detected)) {
_ekf.set_in_air_status(!vehicle_land_detected.landed);
if (_armed && (_param_ekf2_gnd_eff_dz.get() > 0.f)) {
if (!_had_valid_terrain) {
// update ground effect flag based on land detector state if we've never had valid terrain data
_ekf.set_gnd_effect_flag(vehicle_land_detected.in_ground_effect);
}
} else {
_ekf.set_gnd_effect_flag(false);
}
}
}
// ekf2_timestamps (using 0.1 ms relative timestamps)
ekf2_timestamps_s ekf2_timestamps {
.timestamp = now,
.airspeed_timestamp_rel = ekf2_timestamps_s::RELATIVE_TIMESTAMP_INVALID,
.distance_sensor_timestamp_rel = ekf2_timestamps_s::RELATIVE_TIMESTAMP_INVALID,
.optical_flow_timestamp_rel = ekf2_timestamps_s::RELATIVE_TIMESTAMP_INVALID,
.vehicle_air_data_timestamp_rel = ekf2_timestamps_s::RELATIVE_TIMESTAMP_INVALID,
.vehicle_magnetometer_timestamp_rel = ekf2_timestamps_s::RELATIVE_TIMESTAMP_INVALID,
.visual_odometry_timestamp_rel = ekf2_timestamps_s::RELATIVE_TIMESTAMP_INVALID,
};
UpdateAirspeedSample(ekf2_timestamps);
UpdateAuxVelSample(ekf2_timestamps);
UpdateBaroSample(ekf2_timestamps);
UpdateGpsSample(ekf2_timestamps);
UpdateMagSample(ekf2_timestamps);
UpdateRangeSample(ekf2_timestamps);
vehicle_odometry_s ev_odom;
const bool new_ev_odom = UpdateExtVisionSample(ekf2_timestamps, ev_odom);
optical_flow_s optical_flow;
const bool new_optical_flow = UpdateFlowSample(ekf2_timestamps, optical_flow);
// run the EKF update and output
const hrt_abstime ekf_update_start = hrt_absolute_time();
if (_ekf.update()) {
perf_set_elapsed(_ecl_ekf_update_full_perf, hrt_elapsed_time(&ekf_update_start));
PublishLocalPosition(now);
PublishOdometry(now, imu_sample_new);
PublishGlobalPosition(now);
PublishSensorBias(now);
PublishWindEstimate(now);
// publish status/logging messages
PublishEkfDriftMetrics(now);
PublishEventFlags(now);
PublishStates(now);
PublishStatus(now);
PublishStatusFlags(now);
PublishInnovations(now, imu_sample_new);
PublishInnovationTestRatios(now);
PublishInnovationVariances(now);
PublishYawEstimatorStatus(now);
UpdateMagCalibration(now);
} else {
// ekf no update
perf_set_elapsed(_ecl_ekf_update_perf, hrt_elapsed_time(&ekf_update_start));
}
// publish external visual odometry after fixed frame alignment if new odometry is received
if (new_ev_odom) {
PublishOdometryAligned(now, ev_odom);
}
if (new_optical_flow) {
PublishOpticalFlowVel(now, optical_flow);
}
// publish ekf2_timestamps
_ekf2_timestamps_pub.publish(ekf2_timestamps);
}
}
void EKF2::PublishAttitude(const hrt_abstime &timestamp)
{
if (_ekf.attitude_valid()) {
// generate vehicle attitude quaternion data
vehicle_attitude_s att;
att.timestamp_sample = timestamp;
const Quatf q{_ekf.calculate_quaternion()};
q.copyTo(att.q);
_ekf.get_quat_reset(&att.delta_q_reset[0], &att.quat_reset_counter);
att.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_attitude_pub.publish(att);
} else if (_replay_mode) {
// in replay mode we have to tell the replay module not to wait for an update
// we do this by publishing an attitude with zero timestamp
vehicle_attitude_s att{};
_attitude_pub.publish(att);
}
}
void EKF2::PublishEkfDriftMetrics(const hrt_abstime &timestamp)
{
// publish GPS drift data only when updated to minimise overhead
float gps_drift[3];
bool blocked;
if (_ekf.get_gps_drift_metrics(gps_drift, &blocked)) {
ekf_gps_drift_s drift_data;
drift_data.hpos_drift_rate = gps_drift[0];
drift_data.vpos_drift_rate = gps_drift[1];
drift_data.hspd = gps_drift[2];
drift_data.blocked = blocked;
drift_data.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_ekf_gps_drift_pub.publish(drift_data);
}
}
void EKF2::PublishEventFlags(const hrt_abstime &timestamp)
{
// information events
uint32_t information_events = _ekf.information_event_status().value;
bool information_event_updated = false;
if (information_events != 0) {
information_event_updated = true;
_filter_information_event_changes++;
}
// warning events
uint32_t warning_events = _ekf.warning_event_status().value;
bool warning_event_updated = false;
if (warning_events != 0) {
warning_event_updated = true;
_filter_warning_event_changes++;
}
if (information_event_updated || warning_event_updated) {
estimator_event_flags_s event_flags{};
event_flags.timestamp_sample = timestamp;
event_flags.information_event_changes = _filter_information_event_changes;
event_flags.gps_checks_passed = _ekf.information_event_flags().gps_checks_passed;
event_flags.reset_vel_to_gps = _ekf.information_event_flags().reset_vel_to_gps;
event_flags.reset_vel_to_flow = _ekf.information_event_flags().reset_vel_to_flow;
event_flags.reset_vel_to_vision = _ekf.information_event_flags().reset_vel_to_vision;
event_flags.reset_vel_to_zero = _ekf.information_event_flags().reset_vel_to_zero;
event_flags.reset_pos_to_last_known = _ekf.information_event_flags().reset_pos_to_last_known;
event_flags.reset_pos_to_gps = _ekf.information_event_flags().reset_pos_to_gps;
event_flags.reset_pos_to_vision = _ekf.information_event_flags().reset_pos_to_vision;
event_flags.starting_gps_fusion = _ekf.information_event_flags().starting_gps_fusion;
event_flags.starting_vision_pos_fusion = _ekf.information_event_flags().starting_vision_pos_fusion;
event_flags.starting_vision_vel_fusion = _ekf.information_event_flags().starting_vision_vel_fusion;
event_flags.starting_vision_yaw_fusion = _ekf.information_event_flags().starting_vision_yaw_fusion;
event_flags.yaw_aligned_to_imu_gps = _ekf.information_event_flags().yaw_aligned_to_imu_gps;
event_flags.warning_event_changes = _filter_warning_event_changes;
event_flags.gps_quality_poor = _ekf.warning_event_flags().gps_quality_poor;
event_flags.gps_fusion_timout = _ekf.warning_event_flags().gps_fusion_timout;
event_flags.gps_data_stopped = _ekf.warning_event_flags().gps_data_stopped;
event_flags.gps_data_stopped_using_alternate = _ekf.warning_event_flags().gps_data_stopped_using_alternate;
event_flags.height_sensor_timeout = _ekf.warning_event_flags().height_sensor_timeout;
event_flags.stopping_navigation = _ekf.warning_event_flags().stopping_mag_use;
event_flags.invalid_accel_bias_cov_reset = _ekf.warning_event_flags().invalid_accel_bias_cov_reset;
event_flags.bad_yaw_using_gps_course = _ekf.warning_event_flags().bad_yaw_using_gps_course;
event_flags.stopping_mag_use = _ekf.warning_event_flags().stopping_mag_use;
event_flags.vision_data_stopped = _ekf.warning_event_flags().vision_data_stopped;
event_flags.emergency_yaw_reset_mag_stopped = _ekf.warning_event_flags().emergency_yaw_reset_mag_stopped;
event_flags.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_estimator_event_flags_pub.publish(event_flags);
}
_ekf.clear_information_events();
_ekf.clear_warning_events();
}
void EKF2::PublishGlobalPosition(const hrt_abstime &timestamp)
{
if (_ekf.global_position_is_valid() && !_preflt_checker.hasFailed()) {
// only publish if position has changed by at least 1 mm (map_projection_reproject is relatively expensive)
const Vector3f position{_ekf.getPosition()};
if ((_last_local_position_for_gpos - position).longerThan(0.001f)) {
// generate and publish global position data
vehicle_global_position_s global_pos;
global_pos.timestamp_sample = timestamp;
// Position of local NED origin in GPS / WGS84 frame
map_projection_reproject(&_ekf.global_origin(), position(0), position(1), &global_pos.lat, &global_pos.lon);
float delta_xy[2];
_ekf.get_posNE_reset(delta_xy, &global_pos.lat_lon_reset_counter);
global_pos.alt = -position(2) + _ekf.getEkfGlobalOriginAltitude(); // Altitude AMSL in meters
global_pos.alt_ellipsoid = filter_altitude_ellipsoid(global_pos.alt);
// global altitude has opposite sign of local down position
float delta_z;
uint8_t z_reset_counter;
_ekf.get_posD_reset(&delta_z, &z_reset_counter);
global_pos.delta_alt = -delta_z;
_ekf.get_ekf_gpos_accuracy(&global_pos.eph, &global_pos.epv);
if (_ekf.isTerrainEstimateValid()) {
// Terrain altitude in m, WGS84
global_pos.terrain_alt = _ekf.getEkfGlobalOriginAltitude() - _ekf.getTerrainVertPos();
global_pos.terrain_alt_valid = true;
} else {
global_pos.terrain_alt = NAN;
global_pos.terrain_alt_valid = false;
}
global_pos.dead_reckoning = _ekf.inertial_dead_reckoning(); // True if this position is estimated through dead-reckoning
global_pos.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_global_position_pub.publish(global_pos);
_last_local_position_for_gpos = position;
}
}
}
void EKF2::PublishInnovations(const hrt_abstime &timestamp, const imuSample &imu)
{
// publish estimator innovation data
estimator_innovations_s innovations{};
innovations.timestamp_sample = timestamp;
_ekf.getGpsVelPosInnov(innovations.gps_hvel, innovations.gps_vvel, innovations.gps_hpos, innovations.gps_vpos);
_ekf.getEvVelPosInnov(innovations.ev_hvel, innovations.ev_vvel, innovations.ev_hpos, innovations.ev_vpos);
_ekf.getBaroHgtInnov(innovations.baro_vpos);
_ekf.getRngHgtInnov(innovations.rng_vpos);
_ekf.getAuxVelInnov(innovations.aux_hvel);
_ekf.getFlowInnov(innovations.flow);
_ekf.getHeadingInnov(innovations.heading);
_ekf.getMagInnov(innovations.mag_field);
_ekf.getDragInnov(innovations.drag);
_ekf.getAirspeedInnov(innovations.airspeed);
_ekf.getBetaInnov(innovations.beta);
_ekf.getHaglInnov(innovations.hagl);
// Not yet supported
innovations.aux_vvel = NAN;
innovations.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_estimator_innovations_pub.publish(innovations);
// calculate noise filtered velocity innovations which are used for pre-flight checking
if (_standby) {
// TODO: move to run before publications
_preflt_checker.setUsingGpsAiding(_ekf.control_status_flags().gps);
_preflt_checker.setUsingFlowAiding(_ekf.control_status_flags().opt_flow);
_preflt_checker.setUsingEvPosAiding(_ekf.control_status_flags().ev_pos);
_preflt_checker.setUsingEvVelAiding(_ekf.control_status_flags().ev_vel);
_preflt_checker.update(imu.delta_ang_dt, innovations);
}
}
void EKF2::PublishInnovationTestRatios(const hrt_abstime &timestamp)
{
// publish estimator innovation test ratio data
estimator_innovations_s test_ratios{};
test_ratios.timestamp_sample = timestamp;
_ekf.getGpsVelPosInnovRatio(test_ratios.gps_hvel[0], test_ratios.gps_vvel, test_ratios.gps_hpos[0],
test_ratios.gps_vpos);
_ekf.getEvVelPosInnovRatio(test_ratios.ev_hvel[0], test_ratios.ev_vvel, test_ratios.ev_hpos[0], test_ratios.ev_vpos);
_ekf.getBaroHgtInnovRatio(test_ratios.baro_vpos);
_ekf.getRngHgtInnovRatio(test_ratios.rng_vpos);
_ekf.getAuxVelInnovRatio(test_ratios.aux_hvel[0]);
_ekf.getFlowInnovRatio(test_ratios.flow[0]);
_ekf.getHeadingInnovRatio(test_ratios.heading);
_ekf.getMagInnovRatio(test_ratios.mag_field[0]);
_ekf.getDragInnovRatio(&test_ratios.drag[0]);
_ekf.getAirspeedInnovRatio(test_ratios.airspeed);
_ekf.getBetaInnovRatio(test_ratios.beta);
_ekf.getHaglInnovRatio(test_ratios.hagl);
// Not yet supported
test_ratios.aux_vvel = NAN;
test_ratios.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_estimator_innovation_test_ratios_pub.publish(test_ratios);
}
void EKF2::PublishInnovationVariances(const hrt_abstime &timestamp)
{
// publish estimator innovation variance data
estimator_innovations_s variances{};
variances.timestamp_sample = timestamp;
_ekf.getGpsVelPosInnovVar(variances.gps_hvel, variances.gps_vvel, variances.gps_hpos, variances.gps_vpos);
_ekf.getEvVelPosInnovVar(variances.ev_hvel, variances.ev_vvel, variances.ev_hpos, variances.ev_vpos);
_ekf.getBaroHgtInnovVar(variances.baro_vpos);
_ekf.getRngHgtInnovVar(variances.rng_vpos);
_ekf.getAuxVelInnovVar(variances.aux_hvel);
_ekf.getFlowInnovVar(variances.flow);
_ekf.getHeadingInnovVar(variances.heading);
_ekf.getMagInnovVar(variances.mag_field);
_ekf.getDragInnovVar(variances.drag);
_ekf.getAirspeedInnovVar(variances.airspeed);
_ekf.getBetaInnovVar(variances.beta);
_ekf.getHaglInnovVar(variances.hagl);
// Not yet supported
variances.aux_vvel = NAN;
variances.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_estimator_innovation_variances_pub.publish(variances);
}
void EKF2::PublishLocalPosition(const hrt_abstime &timestamp)
{
vehicle_local_position_s lpos;
// generate vehicle local position data
lpos.timestamp_sample = timestamp;
// Position of body origin in local NED frame
const Vector3f position{_ekf.getPosition()};
lpos.x = position(0);
lpos.y = position(1);
lpos.z = position(2);
// Velocity of body origin in local NED frame (m/s)
const Vector3f velocity{_ekf.getVelocity()};
lpos.vx = velocity(0);
lpos.vy = velocity(1);
lpos.vz = velocity(2);
// vertical position time derivative (m/s)
lpos.z_deriv = _ekf.getVerticalPositionDerivative();
// Acceleration of body origin in local frame
const Vector3f vel_deriv{_ekf.getVelocityDerivative()};
lpos.ax = vel_deriv(0);
lpos.ay = vel_deriv(1);
lpos.az = vel_deriv(2);
// TODO: better status reporting
lpos.xy_valid = _ekf.local_position_is_valid() && !_preflt_checker.hasHorizFailed();
lpos.z_valid = !_preflt_checker.hasVertFailed();
lpos.v_xy_valid = _ekf.local_position_is_valid() && !_preflt_checker.hasHorizFailed();
lpos.v_z_valid = !_preflt_checker.hasVertFailed();
// Position of local NED origin in GPS / WGS84 frame
if (_ekf.global_origin_valid()) {
lpos.ref_timestamp = _ekf.global_origin().timestamp;
lpos.ref_lat = math::degrees(_ekf.global_origin().lat_rad); // Reference point latitude in degrees
lpos.ref_lon = math::degrees(_ekf.global_origin().lon_rad); // Reference point longitude in degrees
lpos.ref_alt = _ekf.getEkfGlobalOriginAltitude(); // Reference point in MSL altitude meters
lpos.xy_global = true;
lpos.z_global = true;
} else {
lpos.ref_timestamp = 0;
lpos.ref_lat = static_cast<double>(NAN);
lpos.ref_lon = static_cast<double>(NAN);
lpos.ref_alt = NAN;
lpos.xy_global = false;
lpos.z_global = false;
}
Quatf delta_q_reset;
_ekf.get_quat_reset(&delta_q_reset(0), &lpos.heading_reset_counter);
lpos.heading = Eulerf(_ekf.getQuaternion()).psi();
lpos.delta_heading = Eulerf(delta_q_reset).psi();
// Distance to bottom surface (ground) in meters
// constrain the distance to ground to _rng_gnd_clearance
lpos.dist_bottom = math::max(_ekf.getTerrainVertPos() - lpos.z, _param_ekf2_min_rng.get());
lpos.dist_bottom_valid = _ekf.isTerrainEstimateValid();
lpos.dist_bottom_sensor_bitfield = _ekf.getTerrainEstimateSensorBitfield();
if (!_had_valid_terrain) {
_had_valid_terrain = lpos.dist_bottom_valid;
}
// only consider ground effect if compensation is configured and the vehicle is armed (props spinning)
if ((_param_ekf2_gnd_eff_dz.get() > 0.0f) && _armed && lpos.dist_bottom_valid) {
// set ground effect flag if vehicle is closer than a specified distance to the ground
_ekf.set_gnd_effect_flag(lpos.dist_bottom < _param_ekf2_gnd_max_hgt.get());
// if we have no valid terrain estimate and never had one then use ground effect flag from land detector
// _had_valid_terrain is used to make sure that we don't fall back to using this option
// if we temporarily lose terrain data due to the distance sensor getting out of range
}
_ekf.get_ekf_lpos_accuracy(&lpos.eph, &lpos.epv);
_ekf.get_ekf_vel_accuracy(&lpos.evh, &lpos.evv);
// get state reset information of position and velocity
_ekf.get_posD_reset(&lpos.delta_z, &lpos.z_reset_counter);
_ekf.get_velD_reset(&lpos.delta_vz, &lpos.vz_reset_counter);
_ekf.get_posNE_reset(&lpos.delta_xy[0], &lpos.xy_reset_counter);
_ekf.get_velNE_reset(&lpos.delta_vxy[0], &lpos.vxy_reset_counter);
// get control limit information
_ekf.get_ekf_ctrl_limits(&lpos.vxy_max, &lpos.vz_max, &lpos.hagl_min, &lpos.hagl_max);
// convert NaN to INFINITY
if (!PX4_ISFINITE(lpos.vxy_max)) {
lpos.vxy_max = INFINITY;
}
if (!PX4_ISFINITE(lpos.vz_max)) {
lpos.vz_max = INFINITY;
}
if (!PX4_ISFINITE(lpos.hagl_min)) {
lpos.hagl_min = INFINITY;
}
if (!PX4_ISFINITE(lpos.hagl_max)) {
lpos.hagl_max = INFINITY;
}
// publish vehicle local position data
lpos.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_local_position_pub.publish(lpos);
}
void EKF2::PublishOdometry(const hrt_abstime &timestamp, const imuSample &imu)
{
// generate vehicle odometry data
vehicle_odometry_s odom;
odom.timestamp_sample = imu.time_us;
odom.local_frame = vehicle_odometry_s::LOCAL_FRAME_NED;
// Vehicle odometry position
const Vector3f position{_ekf.getPosition()};
odom.x = position(0);
odom.y = position(1);
odom.z = position(2);
// Vehicle odometry linear velocity
odom.velocity_frame = vehicle_odometry_s::LOCAL_FRAME_FRD;
const Vector3f velocity{_ekf.getVelocity()};
odom.vx = velocity(0);
odom.vy = velocity(1);
odom.vz = velocity(2);
// Vehicle odometry quaternion
_ekf.getQuaternion().copyTo(odom.q);
// Vehicle odometry angular rates
const Vector3f gyro_bias{_ekf.getGyroBias()};
const Vector3f rates{imu.delta_ang / imu.delta_ang_dt};
odom.rollspeed = rates(0) - gyro_bias(0);
odom.pitchspeed = rates(1) - gyro_bias(1);
odom.yawspeed = rates(2) - gyro_bias(2);
// get the covariance matrix size
static constexpr size_t POS_URT_SIZE = sizeof(odom.pose_covariance) / sizeof(odom.pose_covariance[0]);
static constexpr size_t VEL_URT_SIZE = sizeof(odom.velocity_covariance) / sizeof(odom.velocity_covariance[0]);
// Get covariances to vehicle odometry
float covariances[24];
_ekf.covariances_diagonal().copyTo(covariances);
// initially set pose covariances to 0
for (size_t i = 0; i < POS_URT_SIZE; i++) {
odom.pose_covariance[i] = 0.0;
}
// set the position variances
odom.pose_covariance[odom.COVARIANCE_MATRIX_X_VARIANCE] = covariances[7];
odom.pose_covariance[odom.COVARIANCE_MATRIX_Y_VARIANCE] = covariances[8];
odom.pose_covariance[odom.COVARIANCE_MATRIX_Z_VARIANCE] = covariances[9];
// TODO: implement propagation from quaternion covariance to Euler angle covariance
// by employing the covariance law
// initially set velocity covariances to 0
for (size_t i = 0; i < VEL_URT_SIZE; i++) {
odom.velocity_covariance[i] = 0.0;
}
// set the linear velocity variances
odom.velocity_covariance[odom.COVARIANCE_MATRIX_VX_VARIANCE] = covariances[4];
odom.velocity_covariance[odom.COVARIANCE_MATRIX_VY_VARIANCE] = covariances[5];
odom.velocity_covariance[odom.COVARIANCE_MATRIX_VZ_VARIANCE] = covariances[6];
// publish vehicle odometry data
odom.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_odometry_pub.publish(odom);
}
void EKF2::PublishOdometryAligned(const hrt_abstime &timestamp, const vehicle_odometry_s &ev_odom)
{
const Quatf quat_ev2ekf = _ekf.getVisionAlignmentQuaternion(); // rotates from EV to EKF navigation frame
const Dcmf ev_rot_mat(quat_ev2ekf);
vehicle_odometry_s aligned_ev_odom{ev_odom};
// Rotate external position and velocity into EKF navigation frame
const Vector3f aligned_pos = ev_rot_mat * Vector3f(ev_odom.x, ev_odom.y, ev_odom.z);
aligned_ev_odom.x = aligned_pos(0);
aligned_ev_odom.y = aligned_pos(1);
aligned_ev_odom.z = aligned_pos(2);
switch (ev_odom.velocity_frame) {
case vehicle_odometry_s::BODY_FRAME_FRD: {
const Vector3f aligned_vel = Dcmf(_ekf.getQuaternion()) * Vector3f(ev_odom.vx, ev_odom.vy, ev_odom.vz);
aligned_ev_odom.vx = aligned_vel(0);
aligned_ev_odom.vy = aligned_vel(1);
aligned_ev_odom.vz = aligned_vel(2);
break;
}
case vehicle_odometry_s::LOCAL_FRAME_FRD: {
const Vector3f aligned_vel = ev_rot_mat * Vector3f(ev_odom.vx, ev_odom.vy, ev_odom.vz);
aligned_ev_odom.vx = aligned_vel(0);
aligned_ev_odom.vy = aligned_vel(1);
aligned_ev_odom.vz = aligned_vel(2);
break;
}
}
aligned_ev_odom.velocity_frame = vehicle_odometry_s::LOCAL_FRAME_NED;
// Compute orientation in EKF navigation frame
Quatf ev_quat_aligned = quat_ev2ekf * Quatf(ev_odom.q) ;
ev_quat_aligned.normalize();
ev_quat_aligned.copyTo(aligned_ev_odom.q);
quat_ev2ekf.copyTo(aligned_ev_odom.q_offset);
_estimator_visual_odometry_aligned_pub.publish(aligned_ev_odom);
}
void EKF2::PublishSensorBias(const hrt_abstime &timestamp)
{
// estimator_sensor_bias
estimator_sensor_bias_s bias{};
bias.timestamp_sample = timestamp;
const Vector3f gyro_bias{_ekf.getGyroBias()};
const Vector3f accel_bias{_ekf.getAccelBias()};
const Vector3f mag_bias{_mag_cal_last_bias};
// only publish on change
if ((gyro_bias - _last_gyro_bias_published).longerThan(0.001f)
|| (accel_bias - _last_accel_bias_published).longerThan(0.001f)
|| (mag_bias - _last_mag_bias_published).longerThan(0.001f)) {
// take device ids from sensor_selection_s if not using specific vehicle_imu_s
if (_device_id_gyro != 0) {
bias.gyro_device_id = _device_id_gyro;
gyro_bias.copyTo(bias.gyro_bias);
bias.gyro_bias_limit = math::radians(20.f); // 20 degrees/s see Ekf::constrainStates()
_ekf.getGyroBiasVariance().copyTo(bias.gyro_bias_variance);
bias.gyro_bias_valid = true;
_last_gyro_bias_published = gyro_bias;
}
if ((_device_id_accel != 0) && !(_param_ekf2_aid_mask.get() & MASK_INHIBIT_ACC_BIAS)) {
bias.accel_device_id = _device_id_accel;
accel_bias.copyTo(bias.accel_bias);
bias.accel_bias_limit = _params->acc_bias_lim;
_ekf.getAccelBiasVariance().copyTo(bias.accel_bias_variance);
bias.accel_bias_valid = !_ekf.fault_status_flags().bad_acc_bias;
_last_accel_bias_published = accel_bias;
}
if (_device_id_mag != 0) {
bias.mag_device_id = _device_id_mag;
mag_bias.copyTo(bias.mag_bias);
bias.mag_bias_limit = 0.5f; // 0.5 Gauss see Ekf::constrainStates()
_mag_cal_last_bias_variance.copyTo(bias.mag_bias_variance);
bias.mag_bias_valid = _mag_cal_available;
_last_mag_bias_published = mag_bias;
}
bias.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_estimator_sensor_bias_pub.publish(bias);
}
}
void EKF2::PublishStates(const hrt_abstime &timestamp)
{
// publish estimator states
estimator_states_s states;
states.timestamp_sample = timestamp;
states.n_states = 24;
_ekf.getStateAtFusionHorizonAsVector().copyTo(states.states);
_ekf.covariances_diagonal().copyTo(states.covariances);
states.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_estimator_states_pub.publish(states);
}
void EKF2::PublishStatus(const hrt_abstime &timestamp)
{
estimator_status_s status{};
status.timestamp_sample = timestamp;
_ekf.getOutputTrackingError().copyTo(status.output_tracking_error);
_ekf.get_gps_check_status(&status.gps_check_fail_flags);
// only report enabled GPS check failures (the param indexes are shifted by 1 bit, because they don't include
// the GPS Fix bit, which is always checked)
status.gps_check_fail_flags &= ((uint16_t)_params->gps_check_mask << 1) | 1;
status.control_mode_flags = _ekf.control_status().value;
status.filter_fault_flags = _ekf.fault_status().value;
uint16_t innov_check_flags_temp = 0;
_ekf.get_innovation_test_status(innov_check_flags_temp, status.mag_test_ratio,
status.vel_test_ratio, status.pos_test_ratio,
status.hgt_test_ratio, status.tas_test_ratio,
status.hagl_test_ratio, status.beta_test_ratio);
// Bit mismatch between ecl and Firmware, combine the 2 first bits to preserve msg definition
// TODO: legacy use only, those flags are also in estimator_status_flags
status.innovation_check_flags = (innov_check_flags_temp >> 1) | (innov_check_flags_temp & 0x1);
_ekf.get_ekf_lpos_accuracy(&status.pos_horiz_accuracy, &status.pos_vert_accuracy);
_ekf.get_ekf_soln_status(&status.solution_status_flags);
_ekf.getImuVibrationMetrics().copyTo(status.vibe);
// reset counters
status.reset_count_vel_ne = _ekf.state_reset_status().velNE_counter;
status.reset_count_vel_d = _ekf.state_reset_status().velD_counter;
status.reset_count_pos_ne = _ekf.state_reset_status().posNE_counter;
status.reset_count_pod_d = _ekf.state_reset_status().posD_counter;
status.reset_count_quat = _ekf.state_reset_status().quat_counter;
status.time_slip = _last_time_slip_us * 1e-6f;
status.pre_flt_fail_innov_heading = _preflt_checker.hasHeadingFailed();
status.pre_flt_fail_innov_vel_horiz = _preflt_checker.hasHorizVelFailed();
status.pre_flt_fail_innov_vel_vert = _preflt_checker.hasVertVelFailed();
status.pre_flt_fail_innov_height = _preflt_checker.hasHeightFailed();
status.pre_flt_fail_mag_field_disturbed = _ekf.control_status_flags().mag_field_disturbed;
status.accel_device_id = _device_id_accel;
status.baro_device_id = _device_id_baro;
status.gyro_device_id = _device_id_gyro;
status.mag_device_id = _device_id_mag;
status.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_estimator_status_pub.publish(status);
}
void EKF2::PublishStatusFlags(const hrt_abstime &timestamp)
{
// publish at ~ 1 Hz (or immediately if filter control status or fault status changes)
bool update = (hrt_elapsed_time(&_last_status_flag_update) >= 1_s);
// filter control status
if (_ekf.control_status().value != _filter_control_status) {
update = true;
_filter_control_status = _ekf.control_status().value;
_filter_control_status_changes++;
}
// filter fault status
if (_ekf.fault_status().value != _filter_fault_status) {
update = true;
_filter_fault_status = _ekf.fault_status().value;
_filter_fault_status_changes++;
}
// innovation check fail status
if (_ekf.innov_check_fail_status().value != _innov_check_fail_status) {
update = true;
_innov_check_fail_status = _ekf.innov_check_fail_status().value;
_innov_check_fail_status_changes++;
}
if (update) {
estimator_status_flags_s status_flags{};
status_flags.timestamp_sample = timestamp;
status_flags.control_status_changes = _filter_control_status_changes;
status_flags.cs_tilt_align = _ekf.control_status_flags().tilt_align;
status_flags.cs_yaw_align = _ekf.control_status_flags().yaw_align;
status_flags.cs_gps = _ekf.control_status_flags().gps;
status_flags.cs_opt_flow = _ekf.control_status_flags().opt_flow;
status_flags.cs_mag_hdg = _ekf.control_status_flags().mag_hdg;
status_flags.cs_mag_3d = _ekf.control_status_flags().mag_3D;
status_flags.cs_mag_dec = _ekf.control_status_flags().mag_dec;
status_flags.cs_in_air = _ekf.control_status_flags().in_air;
status_flags.cs_wind = _ekf.control_status_flags().wind;
status_flags.cs_baro_hgt = _ekf.control_status_flags().baro_hgt;
status_flags.cs_rng_hgt = _ekf.control_status_flags().rng_hgt;
status_flags.cs_gps_hgt = _ekf.control_status_flags().gps_hgt;
status_flags.cs_ev_pos = _ekf.control_status_flags().ev_pos;
status_flags.cs_ev_yaw = _ekf.control_status_flags().ev_yaw;
status_flags.cs_ev_hgt = _ekf.control_status_flags().ev_hgt;
status_flags.cs_fuse_beta = _ekf.control_status_flags().fuse_beta;
status_flags.cs_mag_field_disturbed = _ekf.control_status_flags().mag_field_disturbed;
status_flags.cs_fixed_wing = _ekf.control_status_flags().fixed_wing;
status_flags.cs_mag_fault = _ekf.control_status_flags().mag_fault;
status_flags.cs_fuse_aspd = _ekf.control_status_flags().fuse_aspd;
status_flags.cs_gnd_effect = _ekf.control_status_flags().gnd_effect;
status_flags.cs_rng_stuck = _ekf.control_status_flags().rng_stuck;
status_flags.cs_gps_yaw = _ekf.control_status_flags().gps_yaw;
status_flags.cs_mag_aligned_in_flight = _ekf.control_status_flags().mag_aligned_in_flight;
status_flags.cs_ev_vel = _ekf.control_status_flags().ev_vel;
status_flags.cs_synthetic_mag_z = _ekf.control_status_flags().synthetic_mag_z;
status_flags.cs_vehicle_at_rest = _ekf.control_status_flags().vehicle_at_rest;
status_flags.fault_status_changes = _filter_fault_status_changes;
status_flags.fs_bad_mag_x = _ekf.fault_status_flags().bad_mag_x;
status_flags.fs_bad_mag_y = _ekf.fault_status_flags().bad_mag_y;
status_flags.fs_bad_mag_z = _ekf.fault_status_flags().bad_mag_z;
status_flags.fs_bad_hdg = _ekf.fault_status_flags().bad_hdg;
status_flags.fs_bad_mag_decl = _ekf.fault_status_flags().bad_mag_decl;
status_flags.fs_bad_airspeed = _ekf.fault_status_flags().bad_airspeed;
status_flags.fs_bad_sideslip = _ekf.fault_status_flags().bad_sideslip;
status_flags.fs_bad_optflow_x = _ekf.fault_status_flags().bad_optflow_X;
status_flags.fs_bad_optflow_y = _ekf.fault_status_flags().bad_optflow_Y;
status_flags.fs_bad_vel_n = _ekf.fault_status_flags().bad_vel_N;
status_flags.fs_bad_vel_e = _ekf.fault_status_flags().bad_vel_E;
status_flags.fs_bad_vel_d = _ekf.fault_status_flags().bad_vel_D;
status_flags.fs_bad_pos_n = _ekf.fault_status_flags().bad_pos_N;
status_flags.fs_bad_pos_e = _ekf.fault_status_flags().bad_pos_E;
status_flags.fs_bad_pos_d = _ekf.fault_status_flags().bad_pos_D;
status_flags.fs_bad_acc_bias = _ekf.fault_status_flags().bad_acc_bias;
status_flags.fs_bad_acc_vertical = _ekf.fault_status_flags().bad_acc_vertical;
status_flags.fs_bad_acc_clipping = _ekf.fault_status_flags().bad_acc_clipping;
status_flags.innovation_fault_status_changes = _innov_check_fail_status_changes;
status_flags.reject_hor_vel = _ekf.innov_check_fail_status_flags().reject_hor_vel;
status_flags.reject_ver_vel = _ekf.innov_check_fail_status_flags().reject_ver_vel;
status_flags.reject_hor_pos = _ekf.innov_check_fail_status_flags().reject_hor_pos;
status_flags.reject_ver_pos = _ekf.innov_check_fail_status_flags().reject_ver_pos;
status_flags.reject_mag_x = _ekf.innov_check_fail_status_flags().reject_mag_x;
status_flags.reject_mag_y = _ekf.innov_check_fail_status_flags().reject_mag_y;
status_flags.reject_mag_z = _ekf.innov_check_fail_status_flags().reject_mag_z;
status_flags.reject_yaw = _ekf.innov_check_fail_status_flags().reject_yaw;
status_flags.reject_airspeed = _ekf.innov_check_fail_status_flags().reject_airspeed;
status_flags.reject_sideslip = _ekf.innov_check_fail_status_flags().reject_sideslip;
status_flags.reject_hagl = _ekf.innov_check_fail_status_flags().reject_hagl;
status_flags.reject_optflow_x = _ekf.innov_check_fail_status_flags().reject_optflow_X;
status_flags.reject_optflow_y = _ekf.innov_check_fail_status_flags().reject_optflow_Y;
status_flags.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_estimator_status_flags_pub.publish(status_flags);
_last_status_flag_update = status_flags.timestamp;
}
}
void EKF2::PublishYawEstimatorStatus(const hrt_abstime &timestamp)
{
static_assert(sizeof(yaw_estimator_status_s::yaw) / sizeof(float) == N_MODELS_EKFGSF,
"yaw_estimator_status_s::yaw wrong size");
yaw_estimator_status_s yaw_est_test_data;
if (_ekf.getDataEKFGSF(&yaw_est_test_data.yaw_composite, &yaw_est_test_data.yaw_variance,
yaw_est_test_data.yaw,
yaw_est_test_data.innov_vn, yaw_est_test_data.innov_ve,
yaw_est_test_data.weight)) {
yaw_est_test_data.timestamp_sample = timestamp;
yaw_est_test_data.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_yaw_est_pub.publish(yaw_est_test_data);
}
}
void EKF2::PublishWindEstimate(const hrt_abstime &timestamp)
{
if (_ekf.get_wind_status()) {
// Publish wind estimate only if ekf declares them valid
wind_s wind{};
wind.timestamp_sample = timestamp;
const Vector2f wind_vel = _ekf.getWindVelocity();
const Vector2f wind_vel_var = _ekf.getWindVelocityVariance();
_ekf.getAirspeedInnov(wind.tas_innov);
_ekf.getAirspeedInnovVar(wind.tas_innov_var);
_ekf.getBetaInnov(wind.beta_innov);
_ekf.getBetaInnovVar(wind.beta_innov_var);
wind.windspeed_north = wind_vel(0);
wind.windspeed_east = wind_vel(1);
wind.variance_north = wind_vel_var(0);
wind.variance_east = wind_vel_var(1);
wind.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_wind_pub.publish(wind);
}
}
void EKF2::PublishOpticalFlowVel(const hrt_abstime &timestamp, const optical_flow_s &flow_sample)
{
estimator_optical_flow_vel_s flow_vel{};
flow_vel.timestamp_sample = flow_sample.timestamp;
_ekf.getFlowVelBody().copyTo(flow_vel.vel_body);
_ekf.getFlowVelNE().copyTo(flow_vel.vel_ne);
_ekf.getFlowUncompensated().copyTo(flow_vel.flow_uncompensated_integral);
_ekf.getFlowCompensated().copyTo(flow_vel.flow_compensated_integral);
_ekf.getFlowGyro().copyTo(flow_vel.gyro_rate_integral);
flow_vel.timestamp = _replay_mode ? timestamp : hrt_absolute_time();
_estimator_optical_flow_vel_pub.publish(flow_vel);
}
float EKF2::filter_altitude_ellipsoid(float amsl_hgt)
{
float height_diff = static_cast<float>(_gps_alttitude_ellipsoid) * 1e-3f - amsl_hgt;
if (_gps_alttitude_ellipsoid_previous_timestamp == 0) {
_wgs84_hgt_offset = height_diff;
_gps_alttitude_ellipsoid_previous_timestamp = _gps_time_usec;
} else if (_gps_time_usec != _gps_alttitude_ellipsoid_previous_timestamp) {
// apply a 10 second first order low pass filter to baro offset
float dt = 1e-6f * (_gps_time_usec - _gps_alttitude_ellipsoid_previous_timestamp);
_gps_alttitude_ellipsoid_previous_timestamp = _gps_time_usec;
float offset_rate_correction = 0.1f * (height_diff - _wgs84_hgt_offset);
_wgs84_hgt_offset += dt * constrain(offset_rate_correction, -0.1f, 0.1f);
}
return amsl_hgt + _wgs84_hgt_offset;
}
void EKF2::UpdateAirspeedSample(ekf2_timestamps_s &ekf2_timestamps)
{
// EKF airspeed sample
airspeed_s airspeed;
if (_airspeed_sub.update(&airspeed)) {
// The airspeed measurement received via the airspeed.msg topic has not been corrected
// for scale favtor errors and requires the ASPD_SCALE correction to be applied.
// This could be avoided if true_airspeed_m_s from the airspeed-validated.msg topic
// was used instead, however this would introduce a potential circular dependency
// via the wind estimator that uses EKF velocity estimates.
const float true_airspeed_m_s = airspeed.true_airspeed_m_s * _airspeed_scale_factor;
// only set airspeed data if condition for airspeed fusion are met
if ((_param_ekf2_arsp_thr.get() > FLT_EPSILON) && (true_airspeed_m_s > _param_ekf2_arsp_thr.get())) {
airspeedSample airspeed_sample {
.time_us = airspeed.timestamp,
.true_airspeed = true_airspeed_m_s,
.eas2tas = airspeed.true_airspeed_m_s / airspeed.indicated_airspeed_m_s,
};
_ekf.setAirspeedData(airspeed_sample);
}
ekf2_timestamps.airspeed_timestamp_rel = (int16_t)((int64_t)airspeed.timestamp / 100 -
(int64_t)ekf2_timestamps.timestamp / 100);
}
}
void EKF2::UpdateAuxVelSample(ekf2_timestamps_s &ekf2_timestamps)
{
// EKF auxillary velocity sample
// - use the landing target pose estimate as another source of velocity data
const unsigned last_generation = _landing_target_pose_sub.get_last_generation();
landing_target_pose_s landing_target_pose;
if (_landing_target_pose_sub.update(&landing_target_pose)) {
if (_landing_target_pose_sub.get_last_generation() != last_generation + 1) {
PX4_ERR("%d - landing_target_pose lost, generation %d -> %d", _instance, last_generation,
_landing_target_pose_sub.get_last_generation());
}
// we can only use the landing target if it has a fixed position and a valid velocity estimate
if (landing_target_pose.is_static && landing_target_pose.rel_vel_valid) {
// velocity of vehicle relative to target has opposite sign to target relative to vehicle
auxVelSample auxvel_sample{
.time_us = landing_target_pose.timestamp,
.vel = Vector3f{-landing_target_pose.vx_rel, -landing_target_pose.vy_rel, 0.0f},
.velVar = Vector3f{landing_target_pose.cov_vx_rel, landing_target_pose.cov_vy_rel, 0.0f},
};
_ekf.setAuxVelData(auxvel_sample);
}
}
}
void EKF2::UpdateBaroSample(ekf2_timestamps_s &ekf2_timestamps)
{
// EKF baro sample
vehicle_air_data_s airdata;
if (_airdata_sub.update(&airdata)) {
_ekf.set_air_density(airdata.rho);
_ekf.setBaroData(baroSample{airdata.timestamp_sample, airdata.baro_alt_meter});
_device_id_baro = airdata.baro_device_id;
ekf2_timestamps.vehicle_air_data_timestamp_rel = (int16_t)((int64_t)airdata.timestamp / 100 -
(int64_t)ekf2_timestamps.timestamp / 100);
}
}
bool EKF2::UpdateExtVisionSample(ekf2_timestamps_s &ekf2_timestamps, vehicle_odometry_s &ev_odom)
{
bool new_ev_odom = false;
const unsigned last_generation = _ev_odom_sub.get_last_generation();
// EKF external vision sample
if (_ev_odom_sub.update(&ev_odom)) {
if (_ev_odom_sub.get_last_generation() != last_generation + 1) {
PX4_ERR("%d - vehicle_visual_odometry lost, generation %d -> %d", _instance, last_generation,
_ev_odom_sub.get_last_generation());
}
if (_param_ekf2_aid_mask.get() & (MASK_USE_EVPOS | MASK_USE_EVYAW | MASK_USE_EVVEL)) {
extVisionSample ev_data{};
// if error estimates are unavailable, use parameter defined defaults
// check for valid velocity data
if (PX4_ISFINITE(ev_odom.vx) && PX4_ISFINITE(ev_odom.vy) && PX4_ISFINITE(ev_odom.vz)) {
ev_data.vel(0) = ev_odom.vx;
ev_data.vel(1) = ev_odom.vy;
ev_data.vel(2) = ev_odom.vz;
if (ev_odom.velocity_frame == vehicle_odometry_s::BODY_FRAME_FRD) {
ev_data.vel_frame = velocity_frame_t::BODY_FRAME_FRD;
} else {
ev_data.vel_frame = velocity_frame_t::LOCAL_FRAME_FRD;
}
// velocity measurement error from ev_data or parameters
float param_evv_noise_var = sq(_param_ekf2_evv_noise.get());
if (!_param_ekf2_ev_noise_md.get() && PX4_ISFINITE(ev_odom.velocity_covariance[ev_odom.COVARIANCE_MATRIX_VX_VARIANCE])
&& PX4_ISFINITE(ev_odom.velocity_covariance[ev_odom.COVARIANCE_MATRIX_VY_VARIANCE])
&& PX4_ISFINITE(ev_odom.velocity_covariance[ev_odom.COVARIANCE_MATRIX_VZ_VARIANCE])) {
ev_data.velCov(0, 0) = ev_odom.velocity_covariance[ev_odom.COVARIANCE_MATRIX_VX_VARIANCE];
ev_data.velCov(0, 1) = ev_data.velCov(1, 0) = ev_odom.velocity_covariance[1];
ev_data.velCov(0, 2) = ev_data.velCov(2, 0) = ev_odom.velocity_covariance[2];
ev_data.velCov(1, 1) = ev_odom.velocity_covariance[ev_odom.COVARIANCE_MATRIX_VY_VARIANCE];
ev_data.velCov(1, 2) = ev_data.velCov(2, 1) = ev_odom.velocity_covariance[7];
ev_data.velCov(2, 2) = ev_odom.velocity_covariance[ev_odom.COVARIANCE_MATRIX_VZ_VARIANCE];
} else {
ev_data.velCov = matrix::eye<float, 3>() * param_evv_noise_var;
}
}
// check for valid position data
if (PX4_ISFINITE(ev_odom.x) && PX4_ISFINITE(ev_odom.y) && PX4_ISFINITE(ev_odom.z)) {
ev_data.pos(0) = ev_odom.x;
ev_data.pos(1) = ev_odom.y;
ev_data.pos(2) = ev_odom.z;
float param_evp_noise_var = sq(_param_ekf2_evp_noise.get());
// position measurement error from ev_data or parameters
if (!_param_ekf2_ev_noise_md.get() && PX4_ISFINITE(ev_odom.pose_covariance[ev_odom.COVARIANCE_MATRIX_X_VARIANCE])
&& PX4_ISFINITE(ev_odom.pose_covariance[ev_odom.COVARIANCE_MATRIX_Y_VARIANCE])
&& PX4_ISFINITE(ev_odom.pose_covariance[ev_odom.COVARIANCE_MATRIX_Z_VARIANCE])) {
ev_data.posVar(0) = fmaxf(param_evp_noise_var, ev_odom.pose_covariance[ev_odom.COVARIANCE_MATRIX_X_VARIANCE]);
ev_data.posVar(1) = fmaxf(param_evp_noise_var, ev_odom.pose_covariance[ev_odom.COVARIANCE_MATRIX_Y_VARIANCE]);
ev_data.posVar(2) = fmaxf(param_evp_noise_var, ev_odom.pose_covariance[ev_odom.COVARIANCE_MATRIX_Z_VARIANCE]);
} else {
ev_data.posVar.setAll(param_evp_noise_var);
}
}
// check for valid orientation data
if (PX4_ISFINITE(ev_odom.q[0])) {
ev_data.quat = Quatf(ev_odom.q);
// orientation measurement error from ev_data or parameters
float param_eva_noise_var = sq(_param_ekf2_eva_noise.get());
if (!_param_ekf2_ev_noise_md.get() && PX4_ISFINITE(ev_odom.pose_covariance[ev_odom.COVARIANCE_MATRIX_YAW_VARIANCE])) {
ev_data.angVar = fmaxf(param_eva_noise_var, ev_odom.pose_covariance[ev_odom.COVARIANCE_MATRIX_YAW_VARIANCE]);
} else {
ev_data.angVar = param_eva_noise_var;
}
}
// use timestamp from external computer, clocks are synchronized when using MAVROS
ev_data.time_us = ev_odom.timestamp_sample;
_ekf.setExtVisionData(ev_data);
new_ev_odom = true;
}
ekf2_timestamps.visual_odometry_timestamp_rel = (int16_t)((int64_t)ev_odom.timestamp / 100 -
(int64_t)ekf2_timestamps.timestamp / 100);
}
return new_ev_odom;
}
bool EKF2::UpdateFlowSample(ekf2_timestamps_s &ekf2_timestamps, optical_flow_s &optical_flow)
{
bool new_optical_flow = false;
const unsigned last_generation = _optical_flow_sub.get_last_generation();
if (_optical_flow_sub.update(&optical_flow)) {
if (_optical_flow_sub.get_last_generation() != last_generation + 1) {
PX4_ERR("%d - optical_flow lost, generation %d -> %d", _instance, last_generation,
_optical_flow_sub.get_last_generation());
}
if (_param_ekf2_aid_mask.get() & MASK_USE_OF) {
flowSample flow {
.time_us = optical_flow.timestamp,
// NOTE: the EKF uses the reverse sign convention to the flow sensor. EKF assumes positive LOS rate
// is produced by a RH rotation of the image about the sensor axis.
.flow_xy_rad = Vector2f{-optical_flow.pixel_flow_x_integral, -optical_flow.pixel_flow_y_integral},
.gyro_xyz = Vector3f{-optical_flow.gyro_x_rate_integral, -optical_flow.gyro_y_rate_integral, -optical_flow.gyro_z_rate_integral},
.dt = 1e-6f * (float)optical_flow.integration_timespan,
.quality = optical_flow.quality,
};
if (PX4_ISFINITE(optical_flow.pixel_flow_y_integral) &&
PX4_ISFINITE(optical_flow.pixel_flow_x_integral) &&
flow.dt < 1) {
// Save sensor limits reported by the optical flow sensor
_ekf.set_optical_flow_limits(optical_flow.max_flow_rate, optical_flow.min_ground_distance,
optical_flow.max_ground_distance);
_ekf.setOpticalFlowData(flow);
new_optical_flow = true;
}
}
ekf2_timestamps.optical_flow_timestamp_rel = (int16_t)((int64_t)optical_flow.timestamp / 100 -
(int64_t)ekf2_timestamps.timestamp / 100);
}
return new_optical_flow;
}
void EKF2::UpdateGpsSample(ekf2_timestamps_s &ekf2_timestamps)
{
// EKF GPS message
if (_param_ekf2_aid_mask.get() & MASK_USE_GPS) {
vehicle_gps_position_s vehicle_gps_position;
if (_vehicle_gps_position_sub.update(&vehicle_gps_position)) {
gps_message gps_msg{
.time_usec = vehicle_gps_position.timestamp,
.lat = vehicle_gps_position.lat,
.lon = vehicle_gps_position.lon,
.alt = vehicle_gps_position.alt,
.yaw = vehicle_gps_position.heading,
.yaw_offset = vehicle_gps_position.heading_offset,
.fix_type = vehicle_gps_position.fix_type,
.eph = vehicle_gps_position.eph,
.epv = vehicle_gps_position.epv,
.sacc = vehicle_gps_position.s_variance_m_s,
.vel_m_s = vehicle_gps_position.vel_m_s,
.vel_ned = Vector3f{
vehicle_gps_position.vel_n_m_s,
vehicle_gps_position.vel_e_m_s,
vehicle_gps_position.vel_d_m_s
},
.vel_ned_valid = vehicle_gps_position.vel_ned_valid,
.nsats = vehicle_gps_position.satellites_used,
.pdop = sqrtf(vehicle_gps_position.hdop *vehicle_gps_position.hdop
+ vehicle_gps_position.vdop * vehicle_gps_position.vdop),
};
_ekf.setGpsData(gps_msg);
if(hold != int(gps_msg.time_usec/1000000))
{
hold=int(gps_msg.time_usec/1000000);
if(hold%2==0)
{
std::cout <<"----------------------current--------------------------"<<std::endl;
std :: cout << "time : "<<gps_msg.time_usec/1000000<<std::endl;
std :: cout << "lat : " <<gps_msg.lat <<std::endl;
std :: cout << "lon : " <<gps_msg.lon <<std::endl;
std :: cout << "alt : " <<gps_msg.alt <<std::endl;
}
}
_gps_time_usec = gps_msg.time_usec;
_gps_alttitude_ellipsoid = vehicle_gps_position.alt_ellipsoid;
}
}
}
void EKF2::UpdateMagSample(ekf2_timestamps_s &ekf2_timestamps)
{
const unsigned last_generation = _magnetometer_sub.get_last_generation();
vehicle_magnetometer_s magnetometer;
if (_magnetometer_sub.update(&magnetometer)) {
if (_magnetometer_sub.get_last_generation() != last_generation + 1) {
perf_count(_mag_missed_perf);
PX4_DEBUG("%d - vehicle_magnetometer lost, generation %d -> %d", _instance, last_generation,
_magnetometer_sub.get_last_generation());
}
bool reset = false;
// check if magnetometer has changed
if (magnetometer.device_id != _device_id_mag) {
if (_device_id_mag != 0) {
PX4_WARN("%d - mag sensor ID changed %d -> %d", _instance, _device_id_mag, magnetometer.device_id);
}
reset = true;
} else if (magnetometer.calibration_count > _mag_calibration_count) {
// existing calibration has changed, reset saved mag bias
PX4_DEBUG("%d - mag %d calibration updated, resetting bias", _instance, _device_id_mag);
reset = true;
}
if (reset) {
_ekf.resetMagBias();
_device_id_mag = magnetometer.device_id;
_mag_calibration_count = magnetometer.calibration_count;
// reset magnetometer bias learning
_mag_cal_total_time_us = 0;
_mag_cal_last_us = 0;
_mag_cal_available = false;
}
_ekf.setMagData(magSample{magnetometer.timestamp_sample, Vector3f{magnetometer.magnetometer_ga}});
ekf2_timestamps.vehicle_magnetometer_timestamp_rel = (int16_t)((int64_t)magnetometer.timestamp / 100 -
(int64_t)ekf2_timestamps.timestamp / 100);
}
}
void EKF2::UpdateRangeSample(ekf2_timestamps_s &ekf2_timestamps)
{
if (!_distance_sensor_selected) {
// get subscription index of first downward-facing range sensor
uORB::SubscriptionMultiArray<distance_sensor_s> distance_sensor_subs{ORB_ID::distance_sensor};
for (unsigned i = 0; i < distance_sensor_subs.size(); i++) {
distance_sensor_s distance_sensor;
if (distance_sensor_subs[i].copy(&distance_sensor)) {
// only use the first instace which has the correct orientation
if ((hrt_elapsed_time(&distance_sensor.timestamp) < 100_ms)
&& (distance_sensor.orientation == distance_sensor_s::ROTATION_DOWNWARD_FACING)) {
if (_distance_sensor_sub.ChangeInstance(i)) {
PX4_INFO("%d - selected distance_sensor:%d", _instance, i);
_distance_sensor_selected = true;
}
}
}
}
}
// EKF range sample
const unsigned last_generation = _distance_sensor_sub.get_last_generation();
distance_sensor_s distance_sensor;
if (_distance_sensor_sub.update(&distance_sensor)) {
if (_distance_sensor_sub.get_last_generation() != last_generation + 1) {
PX4_ERR("%d - distance_sensor lost, generation %d -> %d", _instance, last_generation,
_distance_sensor_sub.get_last_generation());
}
ekf2_timestamps.distance_sensor_timestamp_rel = (int16_t)((int64_t)distance_sensor.timestamp / 100 -
(int64_t)ekf2_timestamps.timestamp / 100);
if (distance_sensor.orientation == distance_sensor_s::ROTATION_DOWNWARD_FACING) {
rangeSample range_sample {
.time_us = distance_sensor.timestamp,
.rng = distance_sensor.current_distance,
.quality = distance_sensor.signal_quality,
};
_ekf.setRangeData(range_sample);
// Save sensor limits reported by the rangefinder
_ekf.set_rangefinder_limits(distance_sensor.min_distance, distance_sensor.max_distance);
_last_range_sensor_update = distance_sensor.timestamp;
return;
}
}
if (hrt_elapsed_time(&_last_range_sensor_update) > 1_s) {
_distance_sensor_selected = false;
}
}
void EKF2::UpdateMagCalibration(const hrt_abstime &timestamp)
{
// Check if conditions are OK for learning of magnetometer bias values
// the EKF is operating in the correct mode and there are no filter faults
if (_ekf.control_status_flags().in_air && _ekf.control_status_flags().mag_3D && (_ekf.fault_status().value == 0)) {
if (_mag_cal_last_us != 0) {
_mag_cal_total_time_us += timestamp - _mag_cal_last_us;
// Start checking mag bias estimates when we have accumulated sufficient calibration time
if (_mag_cal_total_time_us > 30_s) {
_mag_cal_last_bias = _ekf.getMagBias();
_mag_cal_last_bias_variance = _ekf.getMagBiasVariance();
_mag_cal_available = true;
}
}
_mag_cal_last_us = timestamp;
} else {
// conditions are NOT OK for learning magnetometer bias, reset timestamp
// but keep the accumulated calibration time
_mag_cal_last_us = 0;
if (_ekf.fault_status().value != 0) {
// if a filter fault has occurred, assume previous learning was invalid and do not
// count it towards total learning time.
_mag_cal_total_time_us = 0;
}
}
if (!_armed) {
// update stored declination value
if (!_mag_decl_saved) {
float declination_deg;
if (_ekf.get_mag_decl_deg(&declination_deg)) {
_param_ekf2_mag_decl.set(declination_deg);
_mag_decl_saved = true;
if (!_multi_mode) {
_param_ekf2_mag_decl.commit_no_notification();
}
}
}
}
}
int EKF2::custom_command(int argc, char *argv[])
{
return print_usage("unknown command");
}
int EKF2::task_spawn(int argc, char *argv[])
{
bool success = false;
bool replay_mode = false;
if (argc > 1 && !strcmp(argv[1], "-r")) {
PX4_INFO("replay mode enabled");
replay_mode = true;
}
#if !defined(CONSTRAINED_FLASH)
bool multi_mode = false;
int32_t imu_instances = 0;
int32_t mag_instances = 0;
int32_t sens_imu_mode = 1;
param_get(param_find("SENS_IMU_MODE"), &sens_imu_mode);
if (sens_imu_mode == 0) {
// ekf selector requires SENS_IMU_MODE = 0
multi_mode = true;
// IMUs (1 - 4 supported)
param_get(param_find("EKF2_MULTI_IMU"), &imu_instances);
if (imu_instances < 1 || imu_instances > 4) {
const int32_t imu_instances_limited = math::constrain(imu_instances, 1, 4);
PX4_WARN("EKF2_MULTI_IMU limited %d -> %d", imu_instances, imu_instances_limited);
param_set_no_notification(param_find("EKF2_MULTI_IMU"), &imu_instances_limited);
imu_instances = imu_instances_limited;
}
int32_t sens_mag_mode = 1;
param_get(param_find("SENS_MAG_MODE"), &sens_mag_mode);
if (sens_mag_mode == 0) {
param_get(param_find("EKF2_MULTI_MAG"), &mag_instances);
// Mags (1 - 4 supported)
if (mag_instances < 1 || mag_instances > 4) {
const int32_t mag_instances_limited = math::constrain(mag_instances, 1, 4);
PX4_WARN("EKF2_MULTI_MAG limited %d -> %d", mag_instances, mag_instances_limited);
param_set_no_notification(param_find("EKF2_MULTI_MAG"), &mag_instances_limited);
mag_instances = mag_instances_limited;
}
} else {
mag_instances = 1;
}
}
if (multi_mode) {
// Start EKF2Selector if it's not already running
if (_ekf2_selector.load() == nullptr) {
EKF2Selector *inst = new EKF2Selector();
if (inst) {
_ekf2_selector.store(inst);
} else {
PX4_ERR("Failed to create EKF2 selector");
return PX4_ERROR;
}
}
const hrt_abstime time_started = hrt_absolute_time();
const int multi_instances = math::min(imu_instances * mag_instances, (int)EKF2_MAX_INSTANCES);
int multi_instances_allocated = 0;
// allocate EKF2 instances until all found or arming
uORB::SubscriptionData<vehicle_status_s> vehicle_status_sub{ORB_ID(vehicle_status)};
bool ekf2_instance_created[4][4] {}; // IMUs * mags
while ((multi_instances_allocated < multi_instances)
&& (vehicle_status_sub.get().arming_state != vehicle_status_s::ARMING_STATE_ARMED)
&& ((hrt_elapsed_time(&time_started) < 30_s)
|| (vehicle_status_sub.get().hil_state == vehicle_status_s::HIL_STATE_ON))) {
vehicle_status_sub.update();
for (uint8_t mag = 0; mag < mag_instances; mag++) {
uORB::SubscriptionData<vehicle_magnetometer_s> vehicle_mag_sub{ORB_ID(vehicle_magnetometer), mag};
for (uint8_t imu = 0; imu < imu_instances; imu++) {
uORB::SubscriptionData<vehicle_imu_s> vehicle_imu_sub{ORB_ID(vehicle_imu), imu};
vehicle_mag_sub.update();
// Mag & IMU data must be valid, first mag can be ignored initially
if ((vehicle_mag_sub.get().device_id != 0 || mag == 0)
&& (vehicle_imu_sub.get().accel_device_id != 0)
&& (vehicle_imu_sub.get().gyro_device_id != 0)) {
if (!ekf2_instance_created[imu][mag]) {
EKF2 *ekf2_inst = new EKF2(true, px4::ins_instance_to_wq(imu), false);
if (ekf2_inst && ekf2_inst->multi_init(imu, mag)) {
int actual_instance = ekf2_inst->instance(); // match uORB instance numbering
if ((actual_instance >= 0) && (_objects[actual_instance].load() == nullptr)) {
_objects[actual_instance].store(ekf2_inst);
success = true;
multi_instances_allocated++;
ekf2_instance_created[imu][mag] = true;
if (actual_instance == 0) {
// force selector to run immediately if first instance started
_ekf2_selector.load()->ScheduleNow();
}
PX4_INFO("starting instance %d, IMU:%d (%d), MAG:%d (%d)", actual_instance,
imu, vehicle_imu_sub.get().accel_device_id,
mag, vehicle_mag_sub.get().device_id);
// sleep briefly before starting more instances
px4_usleep(10000);
} else {
PX4_ERR("instance numbering problem instance: %d", actual_instance);
delete ekf2_inst;
break;
}
} else {
PX4_ERR("alloc and init failed imu: %d mag:%d", imu, mag);
px4_usleep(1000000);
break;
}
}
} else {
px4_usleep(50000); // give the sensors extra time to start
continue;
}
}
}
if (multi_instances_allocated < multi_instances) {
px4_usleep(100000);
}
}
}
#endif // !CONSTRAINED_FLASH
else {
// otherwise launch regular
EKF2 *ekf2_inst = new EKF2(false, px4::wq_configurations::INS0, replay_mode);
if (ekf2_inst) {
_objects[0].store(ekf2_inst);
ekf2_inst->ScheduleNow();
success = true;
}
}
return success ? PX4_OK : PX4_ERROR;
}
int EKF2::print_usage(const char *reason)
{
if (reason) {
PX4_WARN("%s\n", reason);
}
PRINT_MODULE_DESCRIPTION(
R"DESCR_STR(
### Description
Attitude and position estimator using an Extended Kalman Filter. It is used for Multirotors and Fixed-Wing.
The documentation can be found on the [ECL/EKF Overview & Tuning](https://docs.px4.io/master/en/advanced_config/tuning_the_ecl_ekf.html) page.
ekf2 can be started in replay mode (`-r`): in this mode it does not access the system time, but only uses the
timestamps from the sensor topics.
)DESCR_STR");
PRINT_MODULE_USAGE_NAME("ekf2", "estimator");
PRINT_MODULE_USAGE_COMMAND("start");
PRINT_MODULE_USAGE_PARAM_FLAG('r', "Enable replay mode", true);
PRINT_MODULE_USAGE_DEFAULT_COMMANDS();
return 0;
}
extern "C" __EXPORT int ekf2_main(int argc, char *argv[])
{
if (argc <= 1 || strcmp(argv[1], "-h") == 0) {
return EKF2::print_usage();
}
if (strcmp(argv[1], "start") == 0) {
int ret = 0;
EKF2::lock_module();
ret = EKF2::task_spawn(argc - 1, argv + 1);
if (ret < 0) {
PX4_ERR("start failed (%i)", ret);
}
EKF2::unlock_module();
return ret;
} else if (strcmp(argv[1], "status") == 0) {
if (EKF2::trylock_module()) {
#if !defined(CONSTRAINED_FLASH)
if (_ekf2_selector.load()) {
_ekf2_selector.load()->PrintStatus();
}
#endif // !CONSTRAINED_FLASH
for (int i = 0; i < EKF2_MAX_INSTANCES; i++) {
if (_objects[i].load()) {
PX4_INFO_RAW("\n");
_objects[i].load()->print_status();
}
}
EKF2::unlock_module();
} else {
PX4_WARN("module locked, try again later");
}
return 0;
} else if (strcmp(argv[1], "stop") == 0) {
EKF2::lock_module();
if (argc > 2) {
int instance = atoi(argv[2]);
if (instance >= 0 && instance < EKF2_MAX_INSTANCES) {
PX4_INFO("stopping instance %d", instance);
EKF2 *inst = _objects[instance].load();
if (inst) {
inst->request_stop();
px4_usleep(20000); // 20 ms
delete inst;
_objects[instance].store(nullptr);
}
} else {
PX4_ERR("invalid instance %d", instance);
}
} else {
// otherwise stop everything
bool was_running = false;
#if !defined(CONSTRAINED_FLASH)
if (_ekf2_selector.load()) {
PX4_INFO("stopping ekf2 selector");
_ekf2_selector.load()->Stop();
delete _ekf2_selector.load();
_ekf2_selector.store(nullptr);
was_running = true;
}
#endif // !CONSTRAINED_FLASH
for (int i = 0; i < EKF2_MAX_INSTANCES; i++) {
EKF2 *inst = _objects[i].load();
if (inst) {
PX4_INFO("stopping ekf2 instance %d", i);
was_running = true;
inst->request_stop();
px4_usleep(20000); // 20 ms
delete inst;
_objects[i].store(nullptr);
}
}
if (!was_running) {
PX4_WARN("not running");
}
}
EKF2::unlock_module();
return PX4_OK;
}
EKF2::lock_module(); // Lock here, as the method could access _object.
int ret = EKF2::custom_command(argc - 1, argv + 1);
EKF2::unlock_module();
return ret;
}
......@@ -47,7 +47,7 @@
#include "mission.h"
#include "navigator.h"
#include "iostream"
#include <string.h>
#include <drivers/drv_hrt.h>
#include <dataman/dataman.h>
......@@ -1031,30 +1031,6 @@ Mission::set_mission_items()
generate_waypoint_from_heading(&pos_sp_triplet->current, pos_sp_triplet->current.yaw);
}
/* don't advance mission after FW to MC command */
if (_mission_item.nav_cmd == NAV_CMD_DO_VTOL_TRANSITION
&& _work_item_type == WORK_ITEM_TYPE_DEFAULT
&& new_work_item_type == WORK_ITEM_TYPE_DEFAULT
&& _navigator->get_vstatus()->vehicle_type == vehicle_status_s::VEHICLE_TYPE_FIXED_WING
&& !_navigator->get_land_detected()->landed
&& pos_sp_triplet->current.valid) {
new_work_item_type = WORK_ITEM_TYPE_CMD_BEFORE_MOVE;
}
/* after FW to MC transition finish moving to the waypoint */
if (_work_item_type == WORK_ITEM_TYPE_CMD_BEFORE_MOVE &&
new_work_item_type == WORK_ITEM_TYPE_DEFAULT
&& pos_sp_triplet->current.valid) {
new_work_item_type = WORK_ITEM_TYPE_DEFAULT;
_mission_item.nav_cmd = NAV_CMD_WAYPOINT;
copy_position_if_valid(&_mission_item, &pos_sp_triplet->current);
_mission_item.autocontinue = true;
_mission_item.time_inside = 0.0f;
}
// ignore certain commands in mission fast forward
if ((_mission_execution_mode == mission_result_s::MISSION_EXECUTION_MODE_FAST_FORWARD) &&
(_mission_item.nav_cmd == NAV_CMD_DELAY)) {
......@@ -1862,9 +1838,6 @@ bool Mission::position_setpoint_equal(const position_setpoint_s *p1, const posit
void Mission::publish_navigator_mission_item()
{
for(int i=0;i<8;i++)
{
navigator_mission_item_s navigator_mission_item{};
navigator_mission_item.instance_count = _navigator->mission_instance_count();
......@@ -1891,11 +1864,4 @@ void Mission::publish_navigator_mission_item()
navigator_mission_item.timestamp = hrt_absolute_time();
_navigator_mission_item_pub.publish(navigator_mission_item);
std::cout<<navigator_mission_item.latitude<<std::endl;
navigator_mission_item.sequence_current++;
std::cout<<"************************"<<std::endl;
}
}
......
......@@ -281,7 +281,6 @@ private:
WORK_ITEM_TYPE_TAKEOFF, /**< takeoff before moving to waypoint */
WORK_ITEM_TYPE_MOVE_TO_LAND, /**< move to land waypoint before descent */
WORK_ITEM_TYPE_ALIGN, /**< align for next waypoint */
WORK_ITEM_TYPE_CMD_BEFORE_MOVE,
WORK_ITEM_TYPE_TRANSITON_AFTER_TAKEOFF,
WORK_ITEM_TYPE_MOVE_TO_LAND_AFTER_TRANSITION,
WORK_ITEM_TYPE_PRECISION_LAND
......