=pod

=head1 NAME

EVP_PKEY_CTX_ctrl,
EVP_PKEY_CTX_ctrl_str,
EVP_PKEY_CTX_set_signature_md,
EVP_PKEY_CTX_get_signature_md,
EVP_PKEY_CTX_set_mac_key,
EVP_PKEY_CTX_set_rsa_padding,
EVP_PKEY_CTX_set_rsa_pss_saltlen,
EVP_PKEY_CTX_set_rsa_keygen_bits,
EVP_PKEY_CTX_set_rsa_keygen_pubexp,
EVP_PKEY_CTX_set_dsa_paramgen_bits,
EVP_PKEY_CTX_set_dh_paramgen_prime_len,
EVP_PKEY_CTX_set_dh_paramgen_generator,
EVP_PKEY_CTX_set_dh_pad,
EVP_PKEY_CTX_set_dh_nid,
EVP_PKEY_CTX_set_ec_paramgen_curve_nid,
EVP_PKEY_CTX_set_ec_param_enc,
EVP_PKEY_CTX_set1_id, EVP_PKEY_CTX_get1_id, EVP_PKEY_CTX_get1_id_len
- algorithm specific control operations

=head1 SYNOPSIS

 #include <openssl/evp.h>

 int EVP_PKEY_CTX_ctrl(EVP_PKEY_CTX *ctx, int keytype, int optype,
                       int cmd, int p1, void *p2);
 int EVP_PKEY_CTX_ctrl_str(EVP_PKEY_CTX *ctx, const char *type,
                           const char *value);

 int EVP_PKEY_CTX_set_signature_md(EVP_PKEY_CTX *ctx, const EVP_MD *md);
 int EVP_PKEY_CTX_get_signature_md(EVP_PKEY_CTX *ctx, const EVP_MD **pmd);

 int EVP_PKEY_CTX_set_mac_key(EVP_PKEY_CTX *ctx, unsigned char *key, int len);

 #include <openssl/rsa.h>

 int EVP_PKEY_CTX_set_rsa_padding(EVP_PKEY_CTX *ctx, int pad);
 int EVP_PKEY_CTX_set_rsa_pss_saltlen(EVP_PKEY_CTX *ctx, int len);
 int EVP_PKEY_CTX_set_rsa_keygen_bits(EVP_PKEY_CTX *ctx, int mbits);
 int EVP_PKEY_CTX_set_rsa_keygen_pubexp(EVP_PKEY_CTX *ctx, BIGNUM *pubexp);

 #include <openssl/dsa.h>
 int EVP_PKEY_CTX_set_dsa_paramgen_bits(EVP_PKEY_CTX *ctx, int nbits);

 #include <openssl/dh.h>
 int EVP_PKEY_CTX_set_dh_paramgen_prime_len(EVP_PKEY_CTX *ctx, int len);
 int EVP_PKEY_CTX_set_dh_paramgen_generator(EVP_PKEY_CTX *ctx, int gen);
 int EVP_PKEY_CTX_set_dh_pad(EVP_PKEY_CTX *ctx, int pad);
 int EVP_PKEY_CTX_set_dh_nid(EVP_PKEY_CTX *ctx, int nid);

 #include <openssl/ec.h>
 int EVP_PKEY_CTX_set_ec_paramgen_curve_nid(EVP_PKEY_CTX *ctx, int nid);
 int EVP_PKEY_CTX_set_ec_param_enc(EVP_PKEY_CTX *ctx, int param_enc);

 int EVP_PKEY_CTX_set1_id(EVP_PKEY_CTX *ctx, void *id, size_t id_len);
 int EVP_PKEY_CTX_get1_id(EVP_PKEY_CTX *ctx, void *id);
 int EVP_PKEY_CTX_get1_id_len(EVP_PKEY_CTX *ctx, size_t *id_len);

=head1 DESCRIPTION

The function EVP_PKEY_CTX_ctrl() sends a control operation to the context
B<ctx>. The key type used must match B<keytype> if it is not -1. The parameter
B<optype> is a mask indicating which operations the control can be applied to.
The control command is indicated in B<cmd> and any additional arguments in
B<p1> and B<p2>.

For B<cmd> = B<EVP_PKEY_CTRL_SET_MAC_KEY>, B<p1> is the length of the MAC key,
and B<p2> is MAC key. This is used by Poly1305, SipHash, HMAC and CMAC.

Applications will not normally call EVP_PKEY_CTX_ctrl() directly but will
instead call one of the algorithm specific macros below.

The function EVP_PKEY_CTX_ctrl_str() allows an application to send an algorithm
specific control operation to a context B<ctx> in string form. This is
intended to be used for options specified on the command line or in text
files. The commands supported are documented in the openssl utility
command line pages for the option B<-pkeyopt> which is supported by the
B<pkeyutl>, B<genpkey> and B<req> commands.

All the remaining "functions" are implemented as macros.

The EVP_PKEY_CTX_set_signature_md() macro sets the message digest type used
in a signature. It can be used in the RSA, DSA and ECDSA algorithms.

The EVP_PKEY_CTX_get_signature_md() macro gets the message digest type used in a
signature. It can be used in the RSA, DSA and ECDSA algorithms.

Key generation typically involves setting up parameters to be used and
generating the private and public key data. Some algorithm implementations
allow private key data to be set explicitly using the EVP_PKEY_CTX_set_mac_key()
macro. In this case key generation is simply the process of setting up the
parameters for the key and then setting the raw key data to the value explicitly
provided by that macro. Normally applications would call
L<EVP_PKEY_new_raw_private_key(3)> or similar functions instead of this macro.

The EVP_PKEY_CTX_set_mac_key() macro can be used with any of the algorithms
supported by the L<EVP_PKEY_new_raw_private_key(3)> function.

The macro EVP_PKEY_CTX_set_rsa_padding() sets the RSA padding mode for B<ctx>.
The B<pad> parameter can take the value RSA_PKCS1_PADDING for PKCS#1 padding,
RSA_SSLV23_PADDING for SSLv23 padding, RSA_NO_PADDING for no padding,
RSA_PKCS1_OAEP_PADDING for OAEP padding (encrypt and decrypt only),
RSA_X931_PADDING for X9.31 padding (signature operations only) and
RSA_PKCS1_PSS_PADDING (sign and verify only).

Two RSA padding modes behave differently if EVP_PKEY_CTX_set_signature_md()
is used. If this macro is called for PKCS#1 padding the plaintext buffer is
an actual digest value and is encapsulated in a DigestInfo structure according
to PKCS#1 when signing and this structure is expected (and stripped off) when
verifying. If this control is not used with RSA and PKCS#1 padding then the
supplied data is used directly and not encapsulated. In the case of X9.31
padding for RSA the algorithm identifier byte is added or checked and removed
if this control is called. If it is not called then the first byte of the plaintext
buffer is expected to be the algorithm identifier byte.

The EVP_PKEY_CTX_set_rsa_pss_saltlen() macro sets the RSA PSS salt length to
B<len> as its name implies it is only supported for PSS padding.  Three special
values are supported: RSA_PSS_SALTLEN_DIGEST sets the salt length to the
digest length, RSA_PSS_SALTLEN_MAX sets the salt length to the maximum
permissible value. When verifying RSA_PSS_SALTLEN_AUTO causes the salt length
to be automatically determined based on the B<PSS> block structure. If this
macro is not called maximum salt length is used when signing and auto detection
when verifying is used by default.

The EVP_PKEY_CTX_set_rsa_keygen_bits() macro sets the RSA key length for
RSA key generation to B<bits>. If not specified 1024 bits is used.

The EVP_PKEY_CTX_set_rsa_keygen_pubexp() macro sets the public exponent value
for RSA key generation to B<pubexp> currently it should be an odd integer. The
B<pubexp> pointer is used internally by this function so it should not be
modified or free after the call. If this macro is not called then 65537 is used.

The macro EVP_PKEY_CTX_set_dsa_paramgen_bits() sets the number of bits used
for DSA parameter generation to B<bits>. If not specified 1024 is used.

The macro EVP_PKEY_CTX_set_dh_paramgen_prime_len() sets the length of the DH
prime parameter B<p> for DH parameter generation. If this macro is not called
then 1024 is used.

The EVP_PKEY_CTX_set_dh_paramgen_generator() macro sets DH generator to B<gen>
for DH parameter generation. If not specified 2 is used.

The EVP_PKEY_CTX_set_dh_pad() macro sets the DH padding mode. If B<pad> is
1 the shared secret is padded with zeroes up to the size of the DH prime B<p>.
If B<pad> is zero (the default) then no padding is performed.

EVP_PKEY_CTX_set_dh_nid() sets the DH parameters to values corresponding to
B<nid>. The B<nid> parameter must be B<NID_ffdhe2048>, B<NID_ffdhe3072>,
B<NID_ffdhe4096>, B<NID_ffdhe6144> or B<NID_ffdhe8192>.  This macro can be
called during parameter or key generation.

The EVP_PKEY_CTX_set_ec_paramgen_curve_nid() sets the EC curve for EC parameter
generation to B<nid>. For EC parameter generation this macro must be called
or an error occurs because there is no default curve.
This function can also be called to set the curve explicitly when
generating an EC key.

The EVP_PKEY_CTX_set_ec_param_enc() sets the EC parameter encoding to
B<param_enc> when generating EC parameters or an EC key. The encoding can be
B<OPENSSL_EC_EXPLICIT_CURVE> for explicit parameters (the default in versions
of OpenSSL before 1.1.0) or B<OPENSSL_EC_NAMED_CURVE> to use named curve form.
For maximum compatibility the named curve form should be used. Note: the
B<OPENSSL_EC_NAMED_CURVE> value was only added to OpenSSL 1.1.0; previous
versions should use 0 instead.

The EVP_PKEY_CTX_set1_id(), EVP_PKEY_CTX_get1_id() and EVP_PKEY_CTX_get1_id_len()
macros are used to manipulate the special identifier field for specific signature
algorithms such as SM2. The EVP_PKEY_CTX_set1_id() sets an ID pointed by B<id> with
the length B<id_len> to the library. The library takes a copy of the id so that
the caller can safely free the original memory pointed to by B<id>. The
EVP_PKEY_CTX_get1_id_len() macro returns the length of the ID set via a previous
call to EVP_PKEY_CTX_set1_id(). The length is usually used to allocate adequate
memory for further calls to EVP_PKEY_CTX_get1_id(). The EVP_PKEY_CTX_get1_id()
macro returns the previously set ID value to caller in B<id>. The caller should
allocate adequate memory space for the B<id> before calling EVP_PKEY_CTX_get1_id().

=head1 RETURN VALUES

EVP_PKEY_CTX_ctrl() and its macros return a positive value for success and 0
or a negative value for failure. In particular a return value of -2
indicates the operation is not supported by the public key algorithm.

=head1 SEE ALSO

L<EVP_PKEY_CTX_new(3)>,
L<EVP_PKEY_encrypt(3)>,
L<EVP_PKEY_decrypt(3)>,
L<EVP_PKEY_sign(3)>,
L<EVP_PKEY_verify(3)>,
L<EVP_PKEY_verify_recover(3)>,
L<EVP_PKEY_derive(3)>
L<EVP_PKEY_keygen(3)>

=head1 HISTORY

EVP_PKEY_CTX_set1_id(), EVP_PKEY_CTX_get1_id() and EVP_PKEY_CTX_get1_id_len()
macros were added in 1.1.1, other functions were first added to OpenSSL 1.0.0.

=head1 COPYRIGHT

Copyright 2006-2018 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the OpenSSL license (the "License").  You may not use
this file except in compliance with the License.  You can obtain a copy
in the file LICENSE in the source distribution or at
L<https://www.openssl.org/source/license.html>.

=cut