waf.d.ts 241 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722
import {Request} from '../lib/request';
import {Response} from '../lib/response';
import {AWSError} from '../lib/error';
import {Service} from '../lib/service';
import {ServiceConfigurationOptions} from '../lib/service';
import {ConfigBase as Config} from '../lib/config';
interface Blob {}
declare class WAF extends Service {
  /**
   * Constructs a service object. This object has one method for each API operation.
   */
  constructor(options?: WAF.Types.ClientConfiguration)
  config: Config & WAF.Types.ClientConfiguration;
  /**
   * Creates a ByteMatchSet. You then use UpdateByteMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the User-Agent header or the query string. For example, you can create a ByteMatchSet that matches any requests with User-Agent headers that contain the string BadBot. You can then configure AWS WAF to reject those requests. To create and configure a ByteMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateByteMatchSet request.   Submit a CreateByteMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateByteMatchSet request.   Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createByteMatchSet(params: WAF.Types.CreateByteMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.CreateByteMatchSetResponse) => void): Request<WAF.Types.CreateByteMatchSetResponse, AWSError>;
  /**
   * Creates a ByteMatchSet. You then use UpdateByteMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the User-Agent header or the query string. For example, you can create a ByteMatchSet that matches any requests with User-Agent headers that contain the string BadBot. You can then configure AWS WAF to reject those requests. To create and configure a ByteMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateByteMatchSet request.   Submit a CreateByteMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateByteMatchSet request.   Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createByteMatchSet(callback?: (err: AWSError, data: WAF.Types.CreateByteMatchSetResponse) => void): Request<WAF.Types.CreateByteMatchSetResponse, AWSError>;
  /**
   * Creates an GeoMatchSet, which you use to specify which web requests you want to allow or block based on the country that the requests originate from. For example, if you're receiving a lot of requests from one or more countries and you want to block the requests, you can create an GeoMatchSet that contains those countries and then configure AWS WAF to block the requests.  To create and configure a GeoMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateGeoMatchSet request.   Submit a CreateGeoMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateGeoMatchSet request.   Submit an UpdateGeoMatchSetSet request to specify the countries that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createGeoMatchSet(params: WAF.Types.CreateGeoMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.CreateGeoMatchSetResponse) => void): Request<WAF.Types.CreateGeoMatchSetResponse, AWSError>;
  /**
   * Creates an GeoMatchSet, which you use to specify which web requests you want to allow or block based on the country that the requests originate from. For example, if you're receiving a lot of requests from one or more countries and you want to block the requests, you can create an GeoMatchSet that contains those countries and then configure AWS WAF to block the requests.  To create and configure a GeoMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateGeoMatchSet request.   Submit a CreateGeoMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateGeoMatchSet request.   Submit an UpdateGeoMatchSetSet request to specify the countries that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createGeoMatchSet(callback?: (err: AWSError, data: WAF.Types.CreateGeoMatchSetResponse) => void): Request<WAF.Types.CreateGeoMatchSetResponse, AWSError>;
  /**
   * Creates an IPSet, which you use to specify which web requests that you want to allow or block based on the IP addresses that the requests originate from. For example, if you're receiving a lot of requests from one or more individual IP addresses or one or more ranges of IP addresses and you want to block the requests, you can create an IPSet that contains those IP addresses and then configure AWS WAF to block the requests.  To create and configure an IPSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateIPSet request.   Submit a CreateIPSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request.   Submit an UpdateIPSet request to specify the IP addresses that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createIPSet(params: WAF.Types.CreateIPSetRequest, callback?: (err: AWSError, data: WAF.Types.CreateIPSetResponse) => void): Request<WAF.Types.CreateIPSetResponse, AWSError>;
  /**
   * Creates an IPSet, which you use to specify which web requests that you want to allow or block based on the IP addresses that the requests originate from. For example, if you're receiving a lot of requests from one or more individual IP addresses or one or more ranges of IP addresses and you want to block the requests, you can create an IPSet that contains those IP addresses and then configure AWS WAF to block the requests.  To create and configure an IPSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateIPSet request.   Submit a CreateIPSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request.   Submit an UpdateIPSet request to specify the IP addresses that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createIPSet(callback?: (err: AWSError, data: WAF.Types.CreateIPSetResponse) => void): Request<WAF.Types.CreateIPSetResponse, AWSError>;
  /**
   * Creates a RateBasedRule. The RateBasedRule contains a RateLimit, which specifies the maximum number of requests that AWS WAF allows from a specified IP address in a five-minute period. The RateBasedRule also contains the IPSet objects, ByteMatchSet objects, and other predicates that identify the requests that you want to count or block if these requests exceed the RateLimit. If you add more than one predicate to a RateBasedRule, a request not only must exceed the RateLimit, but it also must match all the specifications to be counted or blocked. For example, suppose you add the following to a RateBasedRule:   An IPSet that matches the IP address 192.0.2.44/32    A ByteMatchSet that matches BadBot in the User-Agent header   Further, you specify a RateLimit of 15,000. You then add the RateBasedRule to a WebACL and specify that you want to block requests that meet the conditions in the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions must be received at a rate of more than 15,000 requests every five minutes. If both conditions are met and the rate is exceeded, AWS WAF blocks the requests. If the rate drops below 15,000 for a five-minute period, AWS WAF no longer blocks the requests. As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule:   A ByteMatchSet with FieldToMatch of URI    A PositionalConstraint of STARTS_WITH    A TargetString of login    Further, you specify a RateLimit of 15,000. By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site. To create and configure a RateBasedRule, perform the following steps:   Create and update the predicates that you want to include in the rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRule request.   Submit a CreateRateBasedRule request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request.   Submit an UpdateRateBasedRule request to specify the predicates that you want to include in the rule.   Create and update a WebACL that contains the RateBasedRule. For more information, see CreateWebACL.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRateBasedRule(params: WAF.Types.CreateRateBasedRuleRequest, callback?: (err: AWSError, data: WAF.Types.CreateRateBasedRuleResponse) => void): Request<WAF.Types.CreateRateBasedRuleResponse, AWSError>;
  /**
   * Creates a RateBasedRule. The RateBasedRule contains a RateLimit, which specifies the maximum number of requests that AWS WAF allows from a specified IP address in a five-minute period. The RateBasedRule also contains the IPSet objects, ByteMatchSet objects, and other predicates that identify the requests that you want to count or block if these requests exceed the RateLimit. If you add more than one predicate to a RateBasedRule, a request not only must exceed the RateLimit, but it also must match all the specifications to be counted or blocked. For example, suppose you add the following to a RateBasedRule:   An IPSet that matches the IP address 192.0.2.44/32    A ByteMatchSet that matches BadBot in the User-Agent header   Further, you specify a RateLimit of 15,000. You then add the RateBasedRule to a WebACL and specify that you want to block requests that meet the conditions in the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions must be received at a rate of more than 15,000 requests every five minutes. If both conditions are met and the rate is exceeded, AWS WAF blocks the requests. If the rate drops below 15,000 for a five-minute period, AWS WAF no longer blocks the requests. As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule:   A ByteMatchSet with FieldToMatch of URI    A PositionalConstraint of STARTS_WITH    A TargetString of login    Further, you specify a RateLimit of 15,000. By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site. To create and configure a RateBasedRule, perform the following steps:   Create and update the predicates that you want to include in the rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRule request.   Submit a CreateRateBasedRule request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request.   Submit an UpdateRateBasedRule request to specify the predicates that you want to include in the rule.   Create and update a WebACL that contains the RateBasedRule. For more information, see CreateWebACL.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRateBasedRule(callback?: (err: AWSError, data: WAF.Types.CreateRateBasedRuleResponse) => void): Request<WAF.Types.CreateRateBasedRuleResponse, AWSError>;
  /**
   * Creates a RegexMatchSet. You then use UpdateRegexMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the User-Agent header or the query string. For example, you can create a RegexMatchSet that contains a RegexMatchTuple that looks for any requests with User-Agent headers that match a RegexPatternSet with pattern B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRegexMatchSet request.   Submit a CreateRegexMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexMatchSet request.   Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value, using a RegexPatternSet, that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRegexMatchSet(params: WAF.Types.CreateRegexMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.CreateRegexMatchSetResponse) => void): Request<WAF.Types.CreateRegexMatchSetResponse, AWSError>;
  /**
   * Creates a RegexMatchSet. You then use UpdateRegexMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the User-Agent header or the query string. For example, you can create a RegexMatchSet that contains a RegexMatchTuple that looks for any requests with User-Agent headers that match a RegexPatternSet with pattern B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRegexMatchSet request.   Submit a CreateRegexMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexMatchSet request.   Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value, using a RegexPatternSet, that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRegexMatchSet(callback?: (err: AWSError, data: WAF.Types.CreateRegexMatchSetResponse) => void): Request<WAF.Types.CreateRegexMatchSetResponse, AWSError>;
  /**
   * Creates a RegexPatternSet. You then use UpdateRegexPatternSet to specify the regular expression (regex) pattern that you want AWS WAF to search for, such as B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexPatternSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRegexPatternSet request.   Submit a CreateRegexPatternSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexPatternSet request.   Submit an UpdateRegexPatternSet request to specify the string that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRegexPatternSet(params: WAF.Types.CreateRegexPatternSetRequest, callback?: (err: AWSError, data: WAF.Types.CreateRegexPatternSetResponse) => void): Request<WAF.Types.CreateRegexPatternSetResponse, AWSError>;
  /**
   * Creates a RegexPatternSet. You then use UpdateRegexPatternSet to specify the regular expression (regex) pattern that you want AWS WAF to search for, such as B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexPatternSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRegexPatternSet request.   Submit a CreateRegexPatternSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexPatternSet request.   Submit an UpdateRegexPatternSet request to specify the string that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRegexPatternSet(callback?: (err: AWSError, data: WAF.Types.CreateRegexPatternSetResponse) => void): Request<WAF.Types.CreateRegexPatternSetResponse, AWSError>;
  /**
   * Creates a Rule, which contains the IPSet objects, ByteMatchSet objects, and other predicates that identify the requests that you want to block. If you add more than one predicate to a Rule, a request must match all of the specifications to be allowed or blocked. For example, suppose that you add the following to a Rule:   An IPSet that matches the IP address 192.0.2.44/32    A ByteMatchSet that matches BadBot in the User-Agent header   You then add the Rule to a WebACL and specify that you want to blocks requests that satisfy the Rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. To create and configure a Rule, perform the following steps:   Create and update the predicates that you want to include in the Rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRule request.   Submit a CreateRule request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request.   Submit an UpdateRule request to specify the predicates that you want to include in the Rule.   Create and update a WebACL that contains the Rule. For more information, see CreateWebACL.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRule(params: WAF.Types.CreateRuleRequest, callback?: (err: AWSError, data: WAF.Types.CreateRuleResponse) => void): Request<WAF.Types.CreateRuleResponse, AWSError>;
  /**
   * Creates a Rule, which contains the IPSet objects, ByteMatchSet objects, and other predicates that identify the requests that you want to block. If you add more than one predicate to a Rule, a request must match all of the specifications to be allowed or blocked. For example, suppose that you add the following to a Rule:   An IPSet that matches the IP address 192.0.2.44/32    A ByteMatchSet that matches BadBot in the User-Agent header   You then add the Rule to a WebACL and specify that you want to blocks requests that satisfy the Rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. To create and configure a Rule, perform the following steps:   Create and update the predicates that you want to include in the Rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRule request.   Submit a CreateRule request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request.   Submit an UpdateRule request to specify the predicates that you want to include in the Rule.   Create and update a WebACL that contains the Rule. For more information, see CreateWebACL.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRule(callback?: (err: AWSError, data: WAF.Types.CreateRuleResponse) => void): Request<WAF.Types.CreateRuleResponse, AWSError>;
  /**
   * Creates a RuleGroup. A rule group is a collection of predefined rules that you add to a web ACL. You use UpdateRuleGroup to add rules to the rule group. Rule groups are subject to the following limits:   Three rule groups per account. You can request an increase to this limit by contacting customer support.   One rule group per web ACL.   Ten rules per rule group.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRuleGroup(params: WAF.Types.CreateRuleGroupRequest, callback?: (err: AWSError, data: WAF.Types.CreateRuleGroupResponse) => void): Request<WAF.Types.CreateRuleGroupResponse, AWSError>;
  /**
   * Creates a RuleGroup. A rule group is a collection of predefined rules that you add to a web ACL. You use UpdateRuleGroup to add rules to the rule group. Rule groups are subject to the following limits:   Three rule groups per account. You can request an increase to this limit by contacting customer support.   One rule group per web ACL.   Ten rules per rule group.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createRuleGroup(callback?: (err: AWSError, data: WAF.Types.CreateRuleGroupResponse) => void): Request<WAF.Types.CreateRuleGroupResponse, AWSError>;
  /**
   * Creates a SizeConstraintSet. You then use UpdateSizeConstraintSet to identify the part of a web request that you want AWS WAF to check for length, such as the length of the User-Agent header or the length of the query string. For example, you can create a SizeConstraintSet that matches any requests that have a query string that is longer than 100 bytes. You can then configure AWS WAF to reject those requests. To create and configure a SizeConstraintSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateSizeConstraintSet request.   Submit a CreateSizeConstraintSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSizeConstraintSet request.   Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createSizeConstraintSet(params: WAF.Types.CreateSizeConstraintSetRequest, callback?: (err: AWSError, data: WAF.Types.CreateSizeConstraintSetResponse) => void): Request<WAF.Types.CreateSizeConstraintSetResponse, AWSError>;
  /**
   * Creates a SizeConstraintSet. You then use UpdateSizeConstraintSet to identify the part of a web request that you want AWS WAF to check for length, such as the length of the User-Agent header or the length of the query string. For example, you can create a SizeConstraintSet that matches any requests that have a query string that is longer than 100 bytes. You can then configure AWS WAF to reject those requests. To create and configure a SizeConstraintSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateSizeConstraintSet request.   Submit a CreateSizeConstraintSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSizeConstraintSet request.   Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createSizeConstraintSet(callback?: (err: AWSError, data: WAF.Types.CreateSizeConstraintSetResponse) => void): Request<WAF.Types.CreateSizeConstraintSetResponse, AWSError>;
  /**
   * Creates a SqlInjectionMatchSet, which you use to allow, block, or count requests that contain snippets of SQL code in a specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings. To create and configure a SqlInjectionMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateSqlInjectionMatchSet request.   Submit a CreateSqlInjectionMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSqlInjectionMatchSet request.   Submit an UpdateSqlInjectionMatchSet request to specify the parts of web requests in which you want to allow, block, or count malicious SQL code.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createSqlInjectionMatchSet(params: WAF.Types.CreateSqlInjectionMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.CreateSqlInjectionMatchSetResponse) => void): Request<WAF.Types.CreateSqlInjectionMatchSetResponse, AWSError>;
  /**
   * Creates a SqlInjectionMatchSet, which you use to allow, block, or count requests that contain snippets of SQL code in a specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings. To create and configure a SqlInjectionMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateSqlInjectionMatchSet request.   Submit a CreateSqlInjectionMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSqlInjectionMatchSet request.   Submit an UpdateSqlInjectionMatchSet request to specify the parts of web requests in which you want to allow, block, or count malicious SQL code.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createSqlInjectionMatchSet(callback?: (err: AWSError, data: WAF.Types.CreateSqlInjectionMatchSetResponse) => void): Request<WAF.Types.CreateSqlInjectionMatchSetResponse, AWSError>;
  /**
   * Creates a WebACL, which contains the Rules that identify the CloudFront web requests that you want to allow, block, or count. AWS WAF evaluates Rules in order based on the value of Priority for each Rule. You also specify a default action, either ALLOW or BLOCK. If a web request doesn't match any of the Rules in a WebACL, AWS WAF responds to the request with the default action.  To create and configure a WebACL, perform the following steps:   Create and update the ByteMatchSet objects and other predicates that you want to include in Rules. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet.   Create and update the Rules that you want to include in the WebACL. For more information, see CreateRule and UpdateRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateWebACL request.   Submit a CreateWebACL request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateWebACL request.   Submit an UpdateWebACL request to specify the Rules that you want to include in the WebACL, to specify the default action, and to associate the WebACL with a CloudFront distribution.   For more information about how to use the AWS WAF API, see the AWS WAF Developer Guide.
   */
  createWebACL(params: WAF.Types.CreateWebACLRequest, callback?: (err: AWSError, data: WAF.Types.CreateWebACLResponse) => void): Request<WAF.Types.CreateWebACLResponse, AWSError>;
  /**
   * Creates a WebACL, which contains the Rules that identify the CloudFront web requests that you want to allow, block, or count. AWS WAF evaluates Rules in order based on the value of Priority for each Rule. You also specify a default action, either ALLOW or BLOCK. If a web request doesn't match any of the Rules in a WebACL, AWS WAF responds to the request with the default action.  To create and configure a WebACL, perform the following steps:   Create and update the ByteMatchSet objects and other predicates that you want to include in Rules. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet.   Create and update the Rules that you want to include in the WebACL. For more information, see CreateRule and UpdateRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateWebACL request.   Submit a CreateWebACL request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateWebACL request.   Submit an UpdateWebACL request to specify the Rules that you want to include in the WebACL, to specify the default action, and to associate the WebACL with a CloudFront distribution.   For more information about how to use the AWS WAF API, see the AWS WAF Developer Guide.
   */
  createWebACL(callback?: (err: AWSError, data: WAF.Types.CreateWebACLResponse) => void): Request<WAF.Types.CreateWebACLResponse, AWSError>;
  /**
   * Creates an XssMatchSet, which you use to allow, block, or count requests that contain cross-site scripting attacks in the specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings. To create and configure an XssMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateXssMatchSet request.   Submit a CreateXssMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateXssMatchSet request.   Submit an UpdateXssMatchSet request to specify the parts of web requests in which you want to allow, block, or count cross-site scripting attacks.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createXssMatchSet(params: WAF.Types.CreateXssMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.CreateXssMatchSetResponse) => void): Request<WAF.Types.CreateXssMatchSetResponse, AWSError>;
  /**
   * Creates an XssMatchSet, which you use to allow, block, or count requests that contain cross-site scripting attacks in the specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings. To create and configure an XssMatchSet, perform the following steps:   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateXssMatchSet request.   Submit a CreateXssMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateXssMatchSet request.   Submit an UpdateXssMatchSet request to specify the parts of web requests in which you want to allow, block, or count cross-site scripting attacks.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  createXssMatchSet(callback?: (err: AWSError, data: WAF.Types.CreateXssMatchSetResponse) => void): Request<WAF.Types.CreateXssMatchSetResponse, AWSError>;
  /**
   * Permanently deletes a ByteMatchSet. You can't delete a ByteMatchSet if it's still used in any Rules or if it still includes any ByteMatchTuple objects (any filters). If you just want to remove a ByteMatchSet from a Rule, use UpdateRule. To permanently delete a ByteMatchSet, perform the following steps:   Update the ByteMatchSet to remove filters, if any. For more information, see UpdateByteMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteByteMatchSet request.   Submit a DeleteByteMatchSet request.  
   */
  deleteByteMatchSet(params: WAF.Types.DeleteByteMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.DeleteByteMatchSetResponse) => void): Request<WAF.Types.DeleteByteMatchSetResponse, AWSError>;
  /**
   * Permanently deletes a ByteMatchSet. You can't delete a ByteMatchSet if it's still used in any Rules or if it still includes any ByteMatchTuple objects (any filters). If you just want to remove a ByteMatchSet from a Rule, use UpdateRule. To permanently delete a ByteMatchSet, perform the following steps:   Update the ByteMatchSet to remove filters, if any. For more information, see UpdateByteMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteByteMatchSet request.   Submit a DeleteByteMatchSet request.  
   */
  deleteByteMatchSet(callback?: (err: AWSError, data: WAF.Types.DeleteByteMatchSetResponse) => void): Request<WAF.Types.DeleteByteMatchSetResponse, AWSError>;
  /**
   * Permanently deletes a GeoMatchSet. You can't delete a GeoMatchSet if it's still used in any Rules or if it still includes any countries. If you just want to remove a GeoMatchSet from a Rule, use UpdateRule. To permanently delete a GeoMatchSet from AWS WAF, perform the following steps:   Update the GeoMatchSet to remove any countries. For more information, see UpdateGeoMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteGeoMatchSet request.   Submit a DeleteGeoMatchSet request.  
   */
  deleteGeoMatchSet(params: WAF.Types.DeleteGeoMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.DeleteGeoMatchSetResponse) => void): Request<WAF.Types.DeleteGeoMatchSetResponse, AWSError>;
  /**
   * Permanently deletes a GeoMatchSet. You can't delete a GeoMatchSet if it's still used in any Rules or if it still includes any countries. If you just want to remove a GeoMatchSet from a Rule, use UpdateRule. To permanently delete a GeoMatchSet from AWS WAF, perform the following steps:   Update the GeoMatchSet to remove any countries. For more information, see UpdateGeoMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteGeoMatchSet request.   Submit a DeleteGeoMatchSet request.  
   */
  deleteGeoMatchSet(callback?: (err: AWSError, data: WAF.Types.DeleteGeoMatchSetResponse) => void): Request<WAF.Types.DeleteGeoMatchSetResponse, AWSError>;
  /**
   * Permanently deletes an IPSet. You can't delete an IPSet if it's still used in any Rules or if it still includes any IP addresses. If you just want to remove an IPSet from a Rule, use UpdateRule. To permanently delete an IPSet from AWS WAF, perform the following steps:   Update the IPSet to remove IP address ranges, if any. For more information, see UpdateIPSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteIPSet request.   Submit a DeleteIPSet request.  
   */
  deleteIPSet(params: WAF.Types.DeleteIPSetRequest, callback?: (err: AWSError, data: WAF.Types.DeleteIPSetResponse) => void): Request<WAF.Types.DeleteIPSetResponse, AWSError>;
  /**
   * Permanently deletes an IPSet. You can't delete an IPSet if it's still used in any Rules or if it still includes any IP addresses. If you just want to remove an IPSet from a Rule, use UpdateRule. To permanently delete an IPSet from AWS WAF, perform the following steps:   Update the IPSet to remove IP address ranges, if any. For more information, see UpdateIPSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteIPSet request.   Submit a DeleteIPSet request.  
   */
  deleteIPSet(callback?: (err: AWSError, data: WAF.Types.DeleteIPSetResponse) => void): Request<WAF.Types.DeleteIPSetResponse, AWSError>;
  /**
   * Permanently deletes the LoggingConfiguration from the specified web ACL.
   */
  deleteLoggingConfiguration(params: WAF.Types.DeleteLoggingConfigurationRequest, callback?: (err: AWSError, data: WAF.Types.DeleteLoggingConfigurationResponse) => void): Request<WAF.Types.DeleteLoggingConfigurationResponse, AWSError>;
  /**
   * Permanently deletes the LoggingConfiguration from the specified web ACL.
   */
  deleteLoggingConfiguration(callback?: (err: AWSError, data: WAF.Types.DeleteLoggingConfigurationResponse) => void): Request<WAF.Types.DeleteLoggingConfigurationResponse, AWSError>;
  /**
   * Permanently deletes an IAM policy from the specified RuleGroup. The user making the request must be the owner of the RuleGroup.
   */
  deletePermissionPolicy(params: WAF.Types.DeletePermissionPolicyRequest, callback?: (err: AWSError, data: WAF.Types.DeletePermissionPolicyResponse) => void): Request<WAF.Types.DeletePermissionPolicyResponse, AWSError>;
  /**
   * Permanently deletes an IAM policy from the specified RuleGroup. The user making the request must be the owner of the RuleGroup.
   */
  deletePermissionPolicy(callback?: (err: AWSError, data: WAF.Types.DeletePermissionPolicyResponse) => void): Request<WAF.Types.DeletePermissionPolicyResponse, AWSError>;
  /**
   * Permanently deletes a RateBasedRule. You can't delete a rule if it's still used in any WebACL objects or if it still includes any predicates, such as ByteMatchSet objects. If you just want to remove a rule from a WebACL, use UpdateWebACL. To permanently delete a RateBasedRule from AWS WAF, perform the following steps:   Update the RateBasedRule to remove predicates, if any. For more information, see UpdateRateBasedRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRateBasedRule request.   Submit a DeleteRateBasedRule request.  
   */
  deleteRateBasedRule(params: WAF.Types.DeleteRateBasedRuleRequest, callback?: (err: AWSError, data: WAF.Types.DeleteRateBasedRuleResponse) => void): Request<WAF.Types.DeleteRateBasedRuleResponse, AWSError>;
  /**
   * Permanently deletes a RateBasedRule. You can't delete a rule if it's still used in any WebACL objects or if it still includes any predicates, such as ByteMatchSet objects. If you just want to remove a rule from a WebACL, use UpdateWebACL. To permanently delete a RateBasedRule from AWS WAF, perform the following steps:   Update the RateBasedRule to remove predicates, if any. For more information, see UpdateRateBasedRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRateBasedRule request.   Submit a DeleteRateBasedRule request.  
   */
  deleteRateBasedRule(callback?: (err: AWSError, data: WAF.Types.DeleteRateBasedRuleResponse) => void): Request<WAF.Types.DeleteRateBasedRuleResponse, AWSError>;
  /**
   * Permanently deletes a RegexMatchSet. You can't delete a RegexMatchSet if it's still used in any Rules or if it still includes any RegexMatchTuples objects (any filters). If you just want to remove a RegexMatchSet from a Rule, use UpdateRule. To permanently delete a RegexMatchSet, perform the following steps:   Update the RegexMatchSet to remove filters, if any. For more information, see UpdateRegexMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRegexMatchSet request.   Submit a DeleteRegexMatchSet request.  
   */
  deleteRegexMatchSet(params: WAF.Types.DeleteRegexMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.DeleteRegexMatchSetResponse) => void): Request<WAF.Types.DeleteRegexMatchSetResponse, AWSError>;
  /**
   * Permanently deletes a RegexMatchSet. You can't delete a RegexMatchSet if it's still used in any Rules or if it still includes any RegexMatchTuples objects (any filters). If you just want to remove a RegexMatchSet from a Rule, use UpdateRule. To permanently delete a RegexMatchSet, perform the following steps:   Update the RegexMatchSet to remove filters, if any. For more information, see UpdateRegexMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRegexMatchSet request.   Submit a DeleteRegexMatchSet request.  
   */
  deleteRegexMatchSet(callback?: (err: AWSError, data: WAF.Types.DeleteRegexMatchSetResponse) => void): Request<WAF.Types.DeleteRegexMatchSetResponse, AWSError>;
  /**
   * Permanently deletes a RegexPatternSet. You can't delete a RegexPatternSet if it's still used in any RegexMatchSet or if the RegexPatternSet is not empty. 
   */
  deleteRegexPatternSet(params: WAF.Types.DeleteRegexPatternSetRequest, callback?: (err: AWSError, data: WAF.Types.DeleteRegexPatternSetResponse) => void): Request<WAF.Types.DeleteRegexPatternSetResponse, AWSError>;
  /**
   * Permanently deletes a RegexPatternSet. You can't delete a RegexPatternSet if it's still used in any RegexMatchSet or if the RegexPatternSet is not empty. 
   */
  deleteRegexPatternSet(callback?: (err: AWSError, data: WAF.Types.DeleteRegexPatternSetResponse) => void): Request<WAF.Types.DeleteRegexPatternSetResponse, AWSError>;
  /**
   * Permanently deletes a Rule. You can't delete a Rule if it's still used in any WebACL objects or if it still includes any predicates, such as ByteMatchSet objects. If you just want to remove a Rule from a WebACL, use UpdateWebACL. To permanently delete a Rule from AWS WAF, perform the following steps:   Update the Rule to remove predicates, if any. For more information, see UpdateRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRule request.   Submit a DeleteRule request.  
   */
  deleteRule(params: WAF.Types.DeleteRuleRequest, callback?: (err: AWSError, data: WAF.Types.DeleteRuleResponse) => void): Request<WAF.Types.DeleteRuleResponse, AWSError>;
  /**
   * Permanently deletes a Rule. You can't delete a Rule if it's still used in any WebACL objects or if it still includes any predicates, such as ByteMatchSet objects. If you just want to remove a Rule from a WebACL, use UpdateWebACL. To permanently delete a Rule from AWS WAF, perform the following steps:   Update the Rule to remove predicates, if any. For more information, see UpdateRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRule request.   Submit a DeleteRule request.  
   */
  deleteRule(callback?: (err: AWSError, data: WAF.Types.DeleteRuleResponse) => void): Request<WAF.Types.DeleteRuleResponse, AWSError>;
  /**
   * Permanently deletes a RuleGroup. You can't delete a RuleGroup if it's still used in any WebACL objects or if it still includes any rules. If you just want to remove a RuleGroup from a WebACL, use UpdateWebACL. To permanently delete a RuleGroup from AWS WAF, perform the following steps:   Update the RuleGroup to remove rules, if any. For more information, see UpdateRuleGroup.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRuleGroup request.   Submit a DeleteRuleGroup request.  
   */
  deleteRuleGroup(params: WAF.Types.DeleteRuleGroupRequest, callback?: (err: AWSError, data: WAF.Types.DeleteRuleGroupResponse) => void): Request<WAF.Types.DeleteRuleGroupResponse, AWSError>;
  /**
   * Permanently deletes a RuleGroup. You can't delete a RuleGroup if it's still used in any WebACL objects or if it still includes any rules. If you just want to remove a RuleGroup from a WebACL, use UpdateWebACL. To permanently delete a RuleGroup from AWS WAF, perform the following steps:   Update the RuleGroup to remove rules, if any. For more information, see UpdateRuleGroup.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRuleGroup request.   Submit a DeleteRuleGroup request.  
   */
  deleteRuleGroup(callback?: (err: AWSError, data: WAF.Types.DeleteRuleGroupResponse) => void): Request<WAF.Types.DeleteRuleGroupResponse, AWSError>;
  /**
   * Permanently deletes a SizeConstraintSet. You can't delete a SizeConstraintSet if it's still used in any Rules or if it still includes any SizeConstraint objects (any filters). If you just want to remove a SizeConstraintSet from a Rule, use UpdateRule. To permanently delete a SizeConstraintSet, perform the following steps:   Update the SizeConstraintSet to remove filters, if any. For more information, see UpdateSizeConstraintSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteSizeConstraintSet request.   Submit a DeleteSizeConstraintSet request.  
   */
  deleteSizeConstraintSet(params: WAF.Types.DeleteSizeConstraintSetRequest, callback?: (err: AWSError, data: WAF.Types.DeleteSizeConstraintSetResponse) => void): Request<WAF.Types.DeleteSizeConstraintSetResponse, AWSError>;
  /**
   * Permanently deletes a SizeConstraintSet. You can't delete a SizeConstraintSet if it's still used in any Rules or if it still includes any SizeConstraint objects (any filters). If you just want to remove a SizeConstraintSet from a Rule, use UpdateRule. To permanently delete a SizeConstraintSet, perform the following steps:   Update the SizeConstraintSet to remove filters, if any. For more information, see UpdateSizeConstraintSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteSizeConstraintSet request.   Submit a DeleteSizeConstraintSet request.  
   */
  deleteSizeConstraintSet(callback?: (err: AWSError, data: WAF.Types.DeleteSizeConstraintSetResponse) => void): Request<WAF.Types.DeleteSizeConstraintSetResponse, AWSError>;
  /**
   * Permanently deletes a SqlInjectionMatchSet. You can't delete a SqlInjectionMatchSet if it's still used in any Rules or if it still contains any SqlInjectionMatchTuple objects. If you just want to remove a SqlInjectionMatchSet from a Rule, use UpdateRule. To permanently delete a SqlInjectionMatchSet from AWS WAF, perform the following steps:   Update the SqlInjectionMatchSet to remove filters, if any. For more information, see UpdateSqlInjectionMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteSqlInjectionMatchSet request.   Submit a DeleteSqlInjectionMatchSet request.  
   */
  deleteSqlInjectionMatchSet(params: WAF.Types.DeleteSqlInjectionMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.DeleteSqlInjectionMatchSetResponse) => void): Request<WAF.Types.DeleteSqlInjectionMatchSetResponse, AWSError>;
  /**
   * Permanently deletes a SqlInjectionMatchSet. You can't delete a SqlInjectionMatchSet if it's still used in any Rules or if it still contains any SqlInjectionMatchTuple objects. If you just want to remove a SqlInjectionMatchSet from a Rule, use UpdateRule. To permanently delete a SqlInjectionMatchSet from AWS WAF, perform the following steps:   Update the SqlInjectionMatchSet to remove filters, if any. For more information, see UpdateSqlInjectionMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteSqlInjectionMatchSet request.   Submit a DeleteSqlInjectionMatchSet request.  
   */
  deleteSqlInjectionMatchSet(callback?: (err: AWSError, data: WAF.Types.DeleteSqlInjectionMatchSetResponse) => void): Request<WAF.Types.DeleteSqlInjectionMatchSetResponse, AWSError>;
  /**
   * Permanently deletes a WebACL. You can't delete a WebACL if it still contains any Rules. To delete a WebACL, perform the following steps:   Update the WebACL to remove Rules, if any. For more information, see UpdateWebACL.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteWebACL request.   Submit a DeleteWebACL request.  
   */
  deleteWebACL(params: WAF.Types.DeleteWebACLRequest, callback?: (err: AWSError, data: WAF.Types.DeleteWebACLResponse) => void): Request<WAF.Types.DeleteWebACLResponse, AWSError>;
  /**
   * Permanently deletes a WebACL. You can't delete a WebACL if it still contains any Rules. To delete a WebACL, perform the following steps:   Update the WebACL to remove Rules, if any. For more information, see UpdateWebACL.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteWebACL request.   Submit a DeleteWebACL request.  
   */
  deleteWebACL(callback?: (err: AWSError, data: WAF.Types.DeleteWebACLResponse) => void): Request<WAF.Types.DeleteWebACLResponse, AWSError>;
  /**
   * Permanently deletes an XssMatchSet. You can't delete an XssMatchSet if it's still used in any Rules or if it still contains any XssMatchTuple objects. If you just want to remove an XssMatchSet from a Rule, use UpdateRule. To permanently delete an XssMatchSet from AWS WAF, perform the following steps:   Update the XssMatchSet to remove filters, if any. For more information, see UpdateXssMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteXssMatchSet request.   Submit a DeleteXssMatchSet request.  
   */
  deleteXssMatchSet(params: WAF.Types.DeleteXssMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.DeleteXssMatchSetResponse) => void): Request<WAF.Types.DeleteXssMatchSetResponse, AWSError>;
  /**
   * Permanently deletes an XssMatchSet. You can't delete an XssMatchSet if it's still used in any Rules or if it still contains any XssMatchTuple objects. If you just want to remove an XssMatchSet from a Rule, use UpdateRule. To permanently delete an XssMatchSet from AWS WAF, perform the following steps:   Update the XssMatchSet to remove filters, if any. For more information, see UpdateXssMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteXssMatchSet request.   Submit a DeleteXssMatchSet request.  
   */
  deleteXssMatchSet(callback?: (err: AWSError, data: WAF.Types.DeleteXssMatchSetResponse) => void): Request<WAF.Types.DeleteXssMatchSetResponse, AWSError>;
  /**
   * Returns the ByteMatchSet specified by ByteMatchSetId.
   */
  getByteMatchSet(params: WAF.Types.GetByteMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.GetByteMatchSetResponse) => void): Request<WAF.Types.GetByteMatchSetResponse, AWSError>;
  /**
   * Returns the ByteMatchSet specified by ByteMatchSetId.
   */
  getByteMatchSet(callback?: (err: AWSError, data: WAF.Types.GetByteMatchSetResponse) => void): Request<WAF.Types.GetByteMatchSetResponse, AWSError>;
  /**
   * When you want to create, update, or delete AWS WAF objects, get a change token and include the change token in the create, update, or delete request. Change tokens ensure that your application doesn't submit conflicting requests to AWS WAF. Each create, update, or delete request must use a unique change token. If your application submits a GetChangeToken request and then submits a second GetChangeToken request before submitting a create, update, or delete request, the second GetChangeToken request returns the same value as the first GetChangeToken request. When you use a change token in a create, update, or delete request, the status of the change token changes to PENDING, which indicates that AWS WAF is propagating the change to all AWS WAF servers. Use GetChangeTokenStatus to determine the status of your change token.
   */
  getChangeToken(params: WAF.Types.GetChangeTokenRequest, callback?: (err: AWSError, data: WAF.Types.GetChangeTokenResponse) => void): Request<WAF.Types.GetChangeTokenResponse, AWSError>;
  /**
   * When you want to create, update, or delete AWS WAF objects, get a change token and include the change token in the create, update, or delete request. Change tokens ensure that your application doesn't submit conflicting requests to AWS WAF. Each create, update, or delete request must use a unique change token. If your application submits a GetChangeToken request and then submits a second GetChangeToken request before submitting a create, update, or delete request, the second GetChangeToken request returns the same value as the first GetChangeToken request. When you use a change token in a create, update, or delete request, the status of the change token changes to PENDING, which indicates that AWS WAF is propagating the change to all AWS WAF servers. Use GetChangeTokenStatus to determine the status of your change token.
   */
  getChangeToken(callback?: (err: AWSError, data: WAF.Types.GetChangeTokenResponse) => void): Request<WAF.Types.GetChangeTokenResponse, AWSError>;
  /**
   * Returns the status of a ChangeToken that you got by calling GetChangeToken. ChangeTokenStatus is one of the following values:    PROVISIONED: You requested the change token by calling GetChangeToken, but you haven't used it yet in a call to create, update, or delete an AWS WAF object.    PENDING: AWS WAF is propagating the create, update, or delete request to all AWS WAF servers.    INSYNC: Propagation is complete.  
   */
  getChangeTokenStatus(params: WAF.Types.GetChangeTokenStatusRequest, callback?: (err: AWSError, data: WAF.Types.GetChangeTokenStatusResponse) => void): Request<WAF.Types.GetChangeTokenStatusResponse, AWSError>;
  /**
   * Returns the status of a ChangeToken that you got by calling GetChangeToken. ChangeTokenStatus is one of the following values:    PROVISIONED: You requested the change token by calling GetChangeToken, but you haven't used it yet in a call to create, update, or delete an AWS WAF object.    PENDING: AWS WAF is propagating the create, update, or delete request to all AWS WAF servers.    INSYNC: Propagation is complete.  
   */
  getChangeTokenStatus(callback?: (err: AWSError, data: WAF.Types.GetChangeTokenStatusResponse) => void): Request<WAF.Types.GetChangeTokenStatusResponse, AWSError>;
  /**
   * Returns the GeoMatchSet that is specified by GeoMatchSetId.
   */
  getGeoMatchSet(params: WAF.Types.GetGeoMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.GetGeoMatchSetResponse) => void): Request<WAF.Types.GetGeoMatchSetResponse, AWSError>;
  /**
   * Returns the GeoMatchSet that is specified by GeoMatchSetId.
   */
  getGeoMatchSet(callback?: (err: AWSError, data: WAF.Types.GetGeoMatchSetResponse) => void): Request<WAF.Types.GetGeoMatchSetResponse, AWSError>;
  /**
   * Returns the IPSet that is specified by IPSetId.
   */
  getIPSet(params: WAF.Types.GetIPSetRequest, callback?: (err: AWSError, data: WAF.Types.GetIPSetResponse) => void): Request<WAF.Types.GetIPSetResponse, AWSError>;
  /**
   * Returns the IPSet that is specified by IPSetId.
   */
  getIPSet(callback?: (err: AWSError, data: WAF.Types.GetIPSetResponse) => void): Request<WAF.Types.GetIPSetResponse, AWSError>;
  /**
   * Returns the LoggingConfiguration for the specified web ACL.
   */
  getLoggingConfiguration(params: WAF.Types.GetLoggingConfigurationRequest, callback?: (err: AWSError, data: WAF.Types.GetLoggingConfigurationResponse) => void): Request<WAF.Types.GetLoggingConfigurationResponse, AWSError>;
  /**
   * Returns the LoggingConfiguration for the specified web ACL.
   */
  getLoggingConfiguration(callback?: (err: AWSError, data: WAF.Types.GetLoggingConfigurationResponse) => void): Request<WAF.Types.GetLoggingConfigurationResponse, AWSError>;
  /**
   * Returns the IAM policy attached to the RuleGroup.
   */
  getPermissionPolicy(params: WAF.Types.GetPermissionPolicyRequest, callback?: (err: AWSError, data: WAF.Types.GetPermissionPolicyResponse) => void): Request<WAF.Types.GetPermissionPolicyResponse, AWSError>;
  /**
   * Returns the IAM policy attached to the RuleGroup.
   */
  getPermissionPolicy(callback?: (err: AWSError, data: WAF.Types.GetPermissionPolicyResponse) => void): Request<WAF.Types.GetPermissionPolicyResponse, AWSError>;
  /**
   * Returns the RateBasedRule that is specified by the RuleId that you included in the GetRateBasedRule request.
   */
  getRateBasedRule(params: WAF.Types.GetRateBasedRuleRequest, callback?: (err: AWSError, data: WAF.Types.GetRateBasedRuleResponse) => void): Request<WAF.Types.GetRateBasedRuleResponse, AWSError>;
  /**
   * Returns the RateBasedRule that is specified by the RuleId that you included in the GetRateBasedRule request.
   */
  getRateBasedRule(callback?: (err: AWSError, data: WAF.Types.GetRateBasedRuleResponse) => void): Request<WAF.Types.GetRateBasedRuleResponse, AWSError>;
  /**
   * Returns an array of IP addresses currently being blocked by the RateBasedRule that is specified by the RuleId. The maximum number of managed keys that will be blocked is 10,000. If more than 10,000 addresses exceed the rate limit, the 10,000 addresses with the highest rates will be blocked.
   */
  getRateBasedRuleManagedKeys(params: WAF.Types.GetRateBasedRuleManagedKeysRequest, callback?: (err: AWSError, data: WAF.Types.GetRateBasedRuleManagedKeysResponse) => void): Request<WAF.Types.GetRateBasedRuleManagedKeysResponse, AWSError>;
  /**
   * Returns an array of IP addresses currently being blocked by the RateBasedRule that is specified by the RuleId. The maximum number of managed keys that will be blocked is 10,000. If more than 10,000 addresses exceed the rate limit, the 10,000 addresses with the highest rates will be blocked.
   */
  getRateBasedRuleManagedKeys(callback?: (err: AWSError, data: WAF.Types.GetRateBasedRuleManagedKeysResponse) => void): Request<WAF.Types.GetRateBasedRuleManagedKeysResponse, AWSError>;
  /**
   * Returns the RegexMatchSet specified by RegexMatchSetId.
   */
  getRegexMatchSet(params: WAF.Types.GetRegexMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.GetRegexMatchSetResponse) => void): Request<WAF.Types.GetRegexMatchSetResponse, AWSError>;
  /**
   * Returns the RegexMatchSet specified by RegexMatchSetId.
   */
  getRegexMatchSet(callback?: (err: AWSError, data: WAF.Types.GetRegexMatchSetResponse) => void): Request<WAF.Types.GetRegexMatchSetResponse, AWSError>;
  /**
   * Returns the RegexPatternSet specified by RegexPatternSetId.
   */
  getRegexPatternSet(params: WAF.Types.GetRegexPatternSetRequest, callback?: (err: AWSError, data: WAF.Types.GetRegexPatternSetResponse) => void): Request<WAF.Types.GetRegexPatternSetResponse, AWSError>;
  /**
   * Returns the RegexPatternSet specified by RegexPatternSetId.
   */
  getRegexPatternSet(callback?: (err: AWSError, data: WAF.Types.GetRegexPatternSetResponse) => void): Request<WAF.Types.GetRegexPatternSetResponse, AWSError>;
  /**
   * Returns the Rule that is specified by the RuleId that you included in the GetRule request.
   */
  getRule(params: WAF.Types.GetRuleRequest, callback?: (err: AWSError, data: WAF.Types.GetRuleResponse) => void): Request<WAF.Types.GetRuleResponse, AWSError>;
  /**
   * Returns the Rule that is specified by the RuleId that you included in the GetRule request.
   */
  getRule(callback?: (err: AWSError, data: WAF.Types.GetRuleResponse) => void): Request<WAF.Types.GetRuleResponse, AWSError>;
  /**
   * Returns the RuleGroup that is specified by the RuleGroupId that you included in the GetRuleGroup request. To view the rules in a rule group, use ListActivatedRulesInRuleGroup.
   */
  getRuleGroup(params: WAF.Types.GetRuleGroupRequest, callback?: (err: AWSError, data: WAF.Types.GetRuleGroupResponse) => void): Request<WAF.Types.GetRuleGroupResponse, AWSError>;
  /**
   * Returns the RuleGroup that is specified by the RuleGroupId that you included in the GetRuleGroup request. To view the rules in a rule group, use ListActivatedRulesInRuleGroup.
   */
  getRuleGroup(callback?: (err: AWSError, data: WAF.Types.GetRuleGroupResponse) => void): Request<WAF.Types.GetRuleGroupResponse, AWSError>;
  /**
   * Gets detailed information about a specified number of requests--a sample--that AWS WAF randomly selects from among the first 5,000 requests that your AWS resource received during a time range that you choose. You can specify a sample size of up to 500 requests, and you can specify any time range in the previous three hours.  GetSampledRequests returns a time range, which is usually the time range that you specified. However, if your resource (such as a CloudFront distribution) received 5,000 requests before the specified time range elapsed, GetSampledRequests returns an updated time range. This new time range indicates the actual period during which AWS WAF selected the requests in the sample.
   */
  getSampledRequests(params: WAF.Types.GetSampledRequestsRequest, callback?: (err: AWSError, data: WAF.Types.GetSampledRequestsResponse) => void): Request<WAF.Types.GetSampledRequestsResponse, AWSError>;
  /**
   * Gets detailed information about a specified number of requests--a sample--that AWS WAF randomly selects from among the first 5,000 requests that your AWS resource received during a time range that you choose. You can specify a sample size of up to 500 requests, and you can specify any time range in the previous three hours.  GetSampledRequests returns a time range, which is usually the time range that you specified. However, if your resource (such as a CloudFront distribution) received 5,000 requests before the specified time range elapsed, GetSampledRequests returns an updated time range. This new time range indicates the actual period during which AWS WAF selected the requests in the sample.
   */
  getSampledRequests(callback?: (err: AWSError, data: WAF.Types.GetSampledRequestsResponse) => void): Request<WAF.Types.GetSampledRequestsResponse, AWSError>;
  /**
   * Returns the SizeConstraintSet specified by SizeConstraintSetId.
   */
  getSizeConstraintSet(params: WAF.Types.GetSizeConstraintSetRequest, callback?: (err: AWSError, data: WAF.Types.GetSizeConstraintSetResponse) => void): Request<WAF.Types.GetSizeConstraintSetResponse, AWSError>;
  /**
   * Returns the SizeConstraintSet specified by SizeConstraintSetId.
   */
  getSizeConstraintSet(callback?: (err: AWSError, data: WAF.Types.GetSizeConstraintSetResponse) => void): Request<WAF.Types.GetSizeConstraintSetResponse, AWSError>;
  /**
   * Returns the SqlInjectionMatchSet that is specified by SqlInjectionMatchSetId.
   */
  getSqlInjectionMatchSet(params: WAF.Types.GetSqlInjectionMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.GetSqlInjectionMatchSetResponse) => void): Request<WAF.Types.GetSqlInjectionMatchSetResponse, AWSError>;
  /**
   * Returns the SqlInjectionMatchSet that is specified by SqlInjectionMatchSetId.
   */
  getSqlInjectionMatchSet(callback?: (err: AWSError, data: WAF.Types.GetSqlInjectionMatchSetResponse) => void): Request<WAF.Types.GetSqlInjectionMatchSetResponse, AWSError>;
  /**
   * Returns the WebACL that is specified by WebACLId.
   */
  getWebACL(params: WAF.Types.GetWebACLRequest, callback?: (err: AWSError, data: WAF.Types.GetWebACLResponse) => void): Request<WAF.Types.GetWebACLResponse, AWSError>;
  /**
   * Returns the WebACL that is specified by WebACLId.
   */
  getWebACL(callback?: (err: AWSError, data: WAF.Types.GetWebACLResponse) => void): Request<WAF.Types.GetWebACLResponse, AWSError>;
  /**
   * Returns the XssMatchSet that is specified by XssMatchSetId.
   */
  getXssMatchSet(params: WAF.Types.GetXssMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.GetXssMatchSetResponse) => void): Request<WAF.Types.GetXssMatchSetResponse, AWSError>;
  /**
   * Returns the XssMatchSet that is specified by XssMatchSetId.
   */
  getXssMatchSet(callback?: (err: AWSError, data: WAF.Types.GetXssMatchSetResponse) => void): Request<WAF.Types.GetXssMatchSetResponse, AWSError>;
  /**
   * Returns an array of ActivatedRule objects.
   */
  listActivatedRulesInRuleGroup(params: WAF.Types.ListActivatedRulesInRuleGroupRequest, callback?: (err: AWSError, data: WAF.Types.ListActivatedRulesInRuleGroupResponse) => void): Request<WAF.Types.ListActivatedRulesInRuleGroupResponse, AWSError>;
  /**
   * Returns an array of ActivatedRule objects.
   */
  listActivatedRulesInRuleGroup(callback?: (err: AWSError, data: WAF.Types.ListActivatedRulesInRuleGroupResponse) => void): Request<WAF.Types.ListActivatedRulesInRuleGroupResponse, AWSError>;
  /**
   * Returns an array of ByteMatchSetSummary objects.
   */
  listByteMatchSets(params: WAF.Types.ListByteMatchSetsRequest, callback?: (err: AWSError, data: WAF.Types.ListByteMatchSetsResponse) => void): Request<WAF.Types.ListByteMatchSetsResponse, AWSError>;
  /**
   * Returns an array of ByteMatchSetSummary objects.
   */
  listByteMatchSets(callback?: (err: AWSError, data: WAF.Types.ListByteMatchSetsResponse) => void): Request<WAF.Types.ListByteMatchSetsResponse, AWSError>;
  /**
   * Returns an array of GeoMatchSetSummary objects in the response.
   */
  listGeoMatchSets(params: WAF.Types.ListGeoMatchSetsRequest, callback?: (err: AWSError, data: WAF.Types.ListGeoMatchSetsResponse) => void): Request<WAF.Types.ListGeoMatchSetsResponse, AWSError>;
  /**
   * Returns an array of GeoMatchSetSummary objects in the response.
   */
  listGeoMatchSets(callback?: (err: AWSError, data: WAF.Types.ListGeoMatchSetsResponse) => void): Request<WAF.Types.ListGeoMatchSetsResponse, AWSError>;
  /**
   * Returns an array of IPSetSummary objects in the response.
   */
  listIPSets(params: WAF.Types.ListIPSetsRequest, callback?: (err: AWSError, data: WAF.Types.ListIPSetsResponse) => void): Request<WAF.Types.ListIPSetsResponse, AWSError>;
  /**
   * Returns an array of IPSetSummary objects in the response.
   */
  listIPSets(callback?: (err: AWSError, data: WAF.Types.ListIPSetsResponse) => void): Request<WAF.Types.ListIPSetsResponse, AWSError>;
  /**
   * Returns an array of LoggingConfiguration objects.
   */
  listLoggingConfigurations(params: WAF.Types.ListLoggingConfigurationsRequest, callback?: (err: AWSError, data: WAF.Types.ListLoggingConfigurationsResponse) => void): Request<WAF.Types.ListLoggingConfigurationsResponse, AWSError>;
  /**
   * Returns an array of LoggingConfiguration objects.
   */
  listLoggingConfigurations(callback?: (err: AWSError, data: WAF.Types.ListLoggingConfigurationsResponse) => void): Request<WAF.Types.ListLoggingConfigurationsResponse, AWSError>;
  /**
   * Returns an array of RuleSummary objects.
   */
  listRateBasedRules(params: WAF.Types.ListRateBasedRulesRequest, callback?: (err: AWSError, data: WAF.Types.ListRateBasedRulesResponse) => void): Request<WAF.Types.ListRateBasedRulesResponse, AWSError>;
  /**
   * Returns an array of RuleSummary objects.
   */
  listRateBasedRules(callback?: (err: AWSError, data: WAF.Types.ListRateBasedRulesResponse) => void): Request<WAF.Types.ListRateBasedRulesResponse, AWSError>;
  /**
   * Returns an array of RegexMatchSetSummary objects.
   */
  listRegexMatchSets(params: WAF.Types.ListRegexMatchSetsRequest, callback?: (err: AWSError, data: WAF.Types.ListRegexMatchSetsResponse) => void): Request<WAF.Types.ListRegexMatchSetsResponse, AWSError>;
  /**
   * Returns an array of RegexMatchSetSummary objects.
   */
  listRegexMatchSets(callback?: (err: AWSError, data: WAF.Types.ListRegexMatchSetsResponse) => void): Request<WAF.Types.ListRegexMatchSetsResponse, AWSError>;
  /**
   * Returns an array of RegexPatternSetSummary objects.
   */
  listRegexPatternSets(params: WAF.Types.ListRegexPatternSetsRequest, callback?: (err: AWSError, data: WAF.Types.ListRegexPatternSetsResponse) => void): Request<WAF.Types.ListRegexPatternSetsResponse, AWSError>;
  /**
   * Returns an array of RegexPatternSetSummary objects.
   */
  listRegexPatternSets(callback?: (err: AWSError, data: WAF.Types.ListRegexPatternSetsResponse) => void): Request<WAF.Types.ListRegexPatternSetsResponse, AWSError>;
  /**
   * Returns an array of RuleGroup objects.
   */
  listRuleGroups(params: WAF.Types.ListRuleGroupsRequest, callback?: (err: AWSError, data: WAF.Types.ListRuleGroupsResponse) => void): Request<WAF.Types.ListRuleGroupsResponse, AWSError>;
  /**
   * Returns an array of RuleGroup objects.
   */
  listRuleGroups(callback?: (err: AWSError, data: WAF.Types.ListRuleGroupsResponse) => void): Request<WAF.Types.ListRuleGroupsResponse, AWSError>;
  /**
   * Returns an array of RuleSummary objects.
   */
  listRules(params: WAF.Types.ListRulesRequest, callback?: (err: AWSError, data: WAF.Types.ListRulesResponse) => void): Request<WAF.Types.ListRulesResponse, AWSError>;
  /**
   * Returns an array of RuleSummary objects.
   */
  listRules(callback?: (err: AWSError, data: WAF.Types.ListRulesResponse) => void): Request<WAF.Types.ListRulesResponse, AWSError>;
  /**
   * Returns an array of SizeConstraintSetSummary objects.
   */
  listSizeConstraintSets(params: WAF.Types.ListSizeConstraintSetsRequest, callback?: (err: AWSError, data: WAF.Types.ListSizeConstraintSetsResponse) => void): Request<WAF.Types.ListSizeConstraintSetsResponse, AWSError>;
  /**
   * Returns an array of SizeConstraintSetSummary objects.
   */
  listSizeConstraintSets(callback?: (err: AWSError, data: WAF.Types.ListSizeConstraintSetsResponse) => void): Request<WAF.Types.ListSizeConstraintSetsResponse, AWSError>;
  /**
   * Returns an array of SqlInjectionMatchSet objects.
   */
  listSqlInjectionMatchSets(params: WAF.Types.ListSqlInjectionMatchSetsRequest, callback?: (err: AWSError, data: WAF.Types.ListSqlInjectionMatchSetsResponse) => void): Request<WAF.Types.ListSqlInjectionMatchSetsResponse, AWSError>;
  /**
   * Returns an array of SqlInjectionMatchSet objects.
   */
  listSqlInjectionMatchSets(callback?: (err: AWSError, data: WAF.Types.ListSqlInjectionMatchSetsResponse) => void): Request<WAF.Types.ListSqlInjectionMatchSetsResponse, AWSError>;
  /**
   * Returns an array of RuleGroup objects that you are subscribed to.
   */
  listSubscribedRuleGroups(params: WAF.Types.ListSubscribedRuleGroupsRequest, callback?: (err: AWSError, data: WAF.Types.ListSubscribedRuleGroupsResponse) => void): Request<WAF.Types.ListSubscribedRuleGroupsResponse, AWSError>;
  /**
   * Returns an array of RuleGroup objects that you are subscribed to.
   */
  listSubscribedRuleGroups(callback?: (err: AWSError, data: WAF.Types.ListSubscribedRuleGroupsResponse) => void): Request<WAF.Types.ListSubscribedRuleGroupsResponse, AWSError>;
  /**
   * 
   */
  listTagsForResource(params: WAF.Types.ListTagsForResourceRequest, callback?: (err: AWSError, data: WAF.Types.ListTagsForResourceResponse) => void): Request<WAF.Types.ListTagsForResourceResponse, AWSError>;
  /**
   * 
   */
  listTagsForResource(callback?: (err: AWSError, data: WAF.Types.ListTagsForResourceResponse) => void): Request<WAF.Types.ListTagsForResourceResponse, AWSError>;
  /**
   * Returns an array of WebACLSummary objects in the response.
   */
  listWebACLs(params: WAF.Types.ListWebACLsRequest, callback?: (err: AWSError, data: WAF.Types.ListWebACLsResponse) => void): Request<WAF.Types.ListWebACLsResponse, AWSError>;
  /**
   * Returns an array of WebACLSummary objects in the response.
   */
  listWebACLs(callback?: (err: AWSError, data: WAF.Types.ListWebACLsResponse) => void): Request<WAF.Types.ListWebACLsResponse, AWSError>;
  /**
   * Returns an array of XssMatchSet objects.
   */
  listXssMatchSets(params: WAF.Types.ListXssMatchSetsRequest, callback?: (err: AWSError, data: WAF.Types.ListXssMatchSetsResponse) => void): Request<WAF.Types.ListXssMatchSetsResponse, AWSError>;
  /**
   * Returns an array of XssMatchSet objects.
   */
  listXssMatchSets(callback?: (err: AWSError, data: WAF.Types.ListXssMatchSetsResponse) => void): Request<WAF.Types.ListXssMatchSetsResponse, AWSError>;
  /**
   * Associates a LoggingConfiguration with a specified web ACL. You can access information about all traffic that AWS WAF inspects using the following steps:   Create an Amazon Kinesis Data Firehose.  Create the data firehose with a PUT source and in the region that you are operating. However, if you are capturing logs for Amazon CloudFront, always create the firehose in US East (N. Virginia).   Do not create the data firehose using a Kinesis stream as your source.    Associate that firehose to your web ACL using a PutLoggingConfiguration request.   When you successfully enable logging using a PutLoggingConfiguration request, AWS WAF will create a service linked role with the necessary permissions to write logs to the Amazon Kinesis Data Firehose. For more information, see Logging Web ACL Traffic Information in the AWS WAF Developer Guide.
   */
  putLoggingConfiguration(params: WAF.Types.PutLoggingConfigurationRequest, callback?: (err: AWSError, data: WAF.Types.PutLoggingConfigurationResponse) => void): Request<WAF.Types.PutLoggingConfigurationResponse, AWSError>;
  /**
   * Associates a LoggingConfiguration with a specified web ACL. You can access information about all traffic that AWS WAF inspects using the following steps:   Create an Amazon Kinesis Data Firehose.  Create the data firehose with a PUT source and in the region that you are operating. However, if you are capturing logs for Amazon CloudFront, always create the firehose in US East (N. Virginia).   Do not create the data firehose using a Kinesis stream as your source.    Associate that firehose to your web ACL using a PutLoggingConfiguration request.   When you successfully enable logging using a PutLoggingConfiguration request, AWS WAF will create a service linked role with the necessary permissions to write logs to the Amazon Kinesis Data Firehose. For more information, see Logging Web ACL Traffic Information in the AWS WAF Developer Guide.
   */
  putLoggingConfiguration(callback?: (err: AWSError, data: WAF.Types.PutLoggingConfigurationResponse) => void): Request<WAF.Types.PutLoggingConfigurationResponse, AWSError>;
  /**
   * Attaches a IAM policy to the specified resource. The only supported use for this action is to share a RuleGroup across accounts. The PutPermissionPolicy is subject to the following restrictions:   You can attach only one policy with each PutPermissionPolicy request.   The policy must include an Effect, Action and Principal.     Effect must specify Allow.   The Action in the policy must be waf:UpdateWebACL, waf-regional:UpdateWebACL, waf:GetRuleGroup and waf-regional:GetRuleGroup . Any extra or wildcard actions in the policy will be rejected.   The policy cannot include a Resource parameter.   The ARN in the request must be a valid WAF RuleGroup ARN and the RuleGroup must exist in the same region.   The user making the request must be the owner of the RuleGroup.   Your policy must be composed using IAM Policy version 2012-10-17.   For more information, see IAM Policies.  An example of a valid policy parameter is shown in the Examples section below.
   */
  putPermissionPolicy(params: WAF.Types.PutPermissionPolicyRequest, callback?: (err: AWSError, data: WAF.Types.PutPermissionPolicyResponse) => void): Request<WAF.Types.PutPermissionPolicyResponse, AWSError>;
  /**
   * Attaches a IAM policy to the specified resource. The only supported use for this action is to share a RuleGroup across accounts. The PutPermissionPolicy is subject to the following restrictions:   You can attach only one policy with each PutPermissionPolicy request.   The policy must include an Effect, Action and Principal.     Effect must specify Allow.   The Action in the policy must be waf:UpdateWebACL, waf-regional:UpdateWebACL, waf:GetRuleGroup and waf-regional:GetRuleGroup . Any extra or wildcard actions in the policy will be rejected.   The policy cannot include a Resource parameter.   The ARN in the request must be a valid WAF RuleGroup ARN and the RuleGroup must exist in the same region.   The user making the request must be the owner of the RuleGroup.   Your policy must be composed using IAM Policy version 2012-10-17.   For more information, see IAM Policies.  An example of a valid policy parameter is shown in the Examples section below.
   */
  putPermissionPolicy(callback?: (err: AWSError, data: WAF.Types.PutPermissionPolicyResponse) => void): Request<WAF.Types.PutPermissionPolicyResponse, AWSError>;
  /**
   * 
   */
  tagResource(params: WAF.Types.TagResourceRequest, callback?: (err: AWSError, data: WAF.Types.TagResourceResponse) => void): Request<WAF.Types.TagResourceResponse, AWSError>;
  /**
   * 
   */
  tagResource(callback?: (err: AWSError, data: WAF.Types.TagResourceResponse) => void): Request<WAF.Types.TagResourceResponse, AWSError>;
  /**
   * 
   */
  untagResource(params: WAF.Types.UntagResourceRequest, callback?: (err: AWSError, data: WAF.Types.UntagResourceResponse) => void): Request<WAF.Types.UntagResourceResponse, AWSError>;
  /**
   * 
   */
  untagResource(callback?: (err: AWSError, data: WAF.Types.UntagResourceResponse) => void): Request<WAF.Types.UntagResourceResponse, AWSError>;
  /**
   * Inserts or deletes ByteMatchTuple objects (filters) in a ByteMatchSet. For each ByteMatchTuple object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change a ByteMatchSetUpdate object, you delete the existing object and add a new one.   The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the User-Agent header.    The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to look for. For more information, including how you specify the values for the AWS WAF API and the AWS CLI or SDKs, see TargetString in the ByteMatchTuple data type.    Where to look, such as at the beginning or the end of a query string.   Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.   For example, you can add a ByteMatchSetUpdate object that matches web requests in which User-Agent headers contain the string BadBot. You can then configure AWS WAF to block those requests. To create and configure a ByteMatchSet, perform the following steps:   Create a ByteMatchSet. For more information, see CreateByteMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateByteMatchSet request.   Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateByteMatchSet(params: WAF.Types.UpdateByteMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.UpdateByteMatchSetResponse) => void): Request<WAF.Types.UpdateByteMatchSetResponse, AWSError>;
  /**
   * Inserts or deletes ByteMatchTuple objects (filters) in a ByteMatchSet. For each ByteMatchTuple object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change a ByteMatchSetUpdate object, you delete the existing object and add a new one.   The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the User-Agent header.    The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to look for. For more information, including how you specify the values for the AWS WAF API and the AWS CLI or SDKs, see TargetString in the ByteMatchTuple data type.    Where to look, such as at the beginning or the end of a query string.   Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.   For example, you can add a ByteMatchSetUpdate object that matches web requests in which User-Agent headers contain the string BadBot. You can then configure AWS WAF to block those requests. To create and configure a ByteMatchSet, perform the following steps:   Create a ByteMatchSet. For more information, see CreateByteMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateByteMatchSet request.   Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateByteMatchSet(callback?: (err: AWSError, data: WAF.Types.UpdateByteMatchSetResponse) => void): Request<WAF.Types.UpdateByteMatchSetResponse, AWSError>;
  /**
   * Inserts or deletes GeoMatchConstraint objects in an GeoMatchSet. For each GeoMatchConstraint object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change an GeoMatchConstraint object, you delete the existing object and add a new one.   The Type. The only valid value for Type is Country.   The Value, which is a two character code for the country to add to the GeoMatchConstraint object. Valid codes are listed in GeoMatchConstraint$Value.   To create and configure an GeoMatchSet, perform the following steps:   Submit a CreateGeoMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateGeoMatchSet request.   Submit an UpdateGeoMatchSet request to specify the country that you want AWS WAF to watch for.   When you update an GeoMatchSet, you specify the country that you want to add and/or the country that you want to delete. If you want to change a country, you delete the existing country and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateGeoMatchSet(params: WAF.Types.UpdateGeoMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.UpdateGeoMatchSetResponse) => void): Request<WAF.Types.UpdateGeoMatchSetResponse, AWSError>;
  /**
   * Inserts or deletes GeoMatchConstraint objects in an GeoMatchSet. For each GeoMatchConstraint object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change an GeoMatchConstraint object, you delete the existing object and add a new one.   The Type. The only valid value for Type is Country.   The Value, which is a two character code for the country to add to the GeoMatchConstraint object. Valid codes are listed in GeoMatchConstraint$Value.   To create and configure an GeoMatchSet, perform the following steps:   Submit a CreateGeoMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateGeoMatchSet request.   Submit an UpdateGeoMatchSet request to specify the country that you want AWS WAF to watch for.   When you update an GeoMatchSet, you specify the country that you want to add and/or the country that you want to delete. If you want to change a country, you delete the existing country and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateGeoMatchSet(callback?: (err: AWSError, data: WAF.Types.UpdateGeoMatchSetResponse) => void): Request<WAF.Types.UpdateGeoMatchSetResponse, AWSError>;
  /**
   * Inserts or deletes IPSetDescriptor objects in an IPSet. For each IPSetDescriptor object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change an IPSetDescriptor object, you delete the existing object and add a new one.   The IP address version, IPv4 or IPv6.    The IP address in CIDR notation, for example, 192.0.2.0/24 (for the range of IP addresses from 192.0.2.0 to 192.0.2.255) or 192.0.2.44/32 (for the individual IP address 192.0.2.44).    AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing. IPv6 addresses can be represented using any of the following formats:   1111:0000:0000:0000:0000:0000:0000:0111/128   1111:0:0:0:0:0:0:0111/128   1111::0111/128   1111::111/128   You use an IPSet to specify which web requests you want to allow or block based on the IP addresses that the requests originated from. For example, if you're receiving a lot of requests from one or a small number of IP addresses and you want to block the requests, you can create an IPSet that specifies those IP addresses, and then configure AWS WAF to block the requests.  To create and configure an IPSet, perform the following steps:   Submit a CreateIPSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request.   Submit an UpdateIPSet request to specify the IP addresses that you want AWS WAF to watch for.   When you update an IPSet, you specify the IP addresses that you want to add and/or the IP addresses that you want to delete. If you want to change an IP address, you delete the existing IP address and add the new one. You can insert a maximum of 1000 addresses in a single request. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateIPSet(params: WAF.Types.UpdateIPSetRequest, callback?: (err: AWSError, data: WAF.Types.UpdateIPSetResponse) => void): Request<WAF.Types.UpdateIPSetResponse, AWSError>;
  /**
   * Inserts or deletes IPSetDescriptor objects in an IPSet. For each IPSetDescriptor object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change an IPSetDescriptor object, you delete the existing object and add a new one.   The IP address version, IPv4 or IPv6.    The IP address in CIDR notation, for example, 192.0.2.0/24 (for the range of IP addresses from 192.0.2.0 to 192.0.2.255) or 192.0.2.44/32 (for the individual IP address 192.0.2.44).    AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing. IPv6 addresses can be represented using any of the following formats:   1111:0000:0000:0000:0000:0000:0000:0111/128   1111:0:0:0:0:0:0:0111/128   1111::0111/128   1111::111/128   You use an IPSet to specify which web requests you want to allow or block based on the IP addresses that the requests originated from. For example, if you're receiving a lot of requests from one or a small number of IP addresses and you want to block the requests, you can create an IPSet that specifies those IP addresses, and then configure AWS WAF to block the requests.  To create and configure an IPSet, perform the following steps:   Submit a CreateIPSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request.   Submit an UpdateIPSet request to specify the IP addresses that you want AWS WAF to watch for.   When you update an IPSet, you specify the IP addresses that you want to add and/or the IP addresses that you want to delete. If you want to change an IP address, you delete the existing IP address and add the new one. You can insert a maximum of 1000 addresses in a single request. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateIPSet(callback?: (err: AWSError, data: WAF.Types.UpdateIPSetResponse) => void): Request<WAF.Types.UpdateIPSetResponse, AWSError>;
  /**
   * Inserts or deletes Predicate objects in a rule and updates the RateLimit in the rule.  Each Predicate object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to block or count. The RateLimit specifies the number of requests every five minutes that triggers the rule. If you add more than one predicate to a RateBasedRule, a request must match all the predicates and exceed the RateLimit to be counted or blocked. For example, suppose you add the following to a RateBasedRule:   An IPSet that matches the IP address 192.0.2.44/32    A ByteMatchSet that matches BadBot in the User-Agent header   Further, you specify a RateLimit of 15,000. You then add the RateBasedRule to a WebACL and specify that you want to block requests that satisfy the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions much be received at a rate of more than 15,000 every five minutes. If the rate drops below this limit, AWS WAF no longer blocks the requests. As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule:   A ByteMatchSet with FieldToMatch of URI    A PositionalConstraint of STARTS_WITH    A TargetString of login    Further, you specify a RateLimit of 15,000. By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site.
   */
  updateRateBasedRule(params: WAF.Types.UpdateRateBasedRuleRequest, callback?: (err: AWSError, data: WAF.Types.UpdateRateBasedRuleResponse) => void): Request<WAF.Types.UpdateRateBasedRuleResponse, AWSError>;
  /**
   * Inserts or deletes Predicate objects in a rule and updates the RateLimit in the rule.  Each Predicate object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to block or count. The RateLimit specifies the number of requests every five minutes that triggers the rule. If you add more than one predicate to a RateBasedRule, a request must match all the predicates and exceed the RateLimit to be counted or blocked. For example, suppose you add the following to a RateBasedRule:   An IPSet that matches the IP address 192.0.2.44/32    A ByteMatchSet that matches BadBot in the User-Agent header   Further, you specify a RateLimit of 15,000. You then add the RateBasedRule to a WebACL and specify that you want to block requests that satisfy the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions much be received at a rate of more than 15,000 every five minutes. If the rate drops below this limit, AWS WAF no longer blocks the requests. As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule:   A ByteMatchSet with FieldToMatch of URI    A PositionalConstraint of STARTS_WITH    A TargetString of login    Further, you specify a RateLimit of 15,000. By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site.
   */
  updateRateBasedRule(callback?: (err: AWSError, data: WAF.Types.UpdateRateBasedRuleResponse) => void): Request<WAF.Types.UpdateRateBasedRuleResponse, AWSError>;
  /**
   * Inserts or deletes RegexMatchTuple objects (filters) in a RegexMatchSet. For each RegexMatchSetUpdate object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change a RegexMatchSetUpdate object, you delete the existing object and add a new one.   The part of a web request that you want AWS WAF to inspectupdate, such as a query string or the value of the User-Agent header.    The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see RegexPatternSet.    Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.    For example, you can create a RegexPatternSet that matches any requests with User-Agent headers that contain the string B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexMatchSet, perform the following steps:   Create a RegexMatchSet. For more information, see CreateRegexMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexMatchSet request.   Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the identifier of the RegexPatternSet that contain the regular expression patters you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateRegexMatchSet(params: WAF.Types.UpdateRegexMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.UpdateRegexMatchSetResponse) => void): Request<WAF.Types.UpdateRegexMatchSetResponse, AWSError>;
  /**
   * Inserts or deletes RegexMatchTuple objects (filters) in a RegexMatchSet. For each RegexMatchSetUpdate object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change a RegexMatchSetUpdate object, you delete the existing object and add a new one.   The part of a web request that you want AWS WAF to inspectupdate, such as a query string or the value of the User-Agent header.    The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see RegexPatternSet.    Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.    For example, you can create a RegexPatternSet that matches any requests with User-Agent headers that contain the string B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexMatchSet, perform the following steps:   Create a RegexMatchSet. For more information, see CreateRegexMatchSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexMatchSet request.   Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the identifier of the RegexPatternSet that contain the regular expression patters you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateRegexMatchSet(callback?: (err: AWSError, data: WAF.Types.UpdateRegexMatchSetResponse) => void): Request<WAF.Types.UpdateRegexMatchSetResponse, AWSError>;
  /**
   * Inserts or deletes RegexPatternString objects in a RegexPatternSet. For each RegexPatternString object, you specify the following values:    Whether to insert or delete the RegexPatternString.   The regular expression pattern that you want to insert or delete. For more information, see RegexPatternSet.     For example, you can create a RegexPatternString such as B[a@]dB[o0]t. AWS WAF will match this RegexPatternString to:   BadBot   BadB0t   B@dBot   B@dB0t   To create and configure a RegexPatternSet, perform the following steps:   Create a RegexPatternSet. For more information, see CreateRegexPatternSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexPatternSet request.   Submit an UpdateRegexPatternSet request to specify the regular expression pattern that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateRegexPatternSet(params: WAF.Types.UpdateRegexPatternSetRequest, callback?: (err: AWSError, data: WAF.Types.UpdateRegexPatternSetResponse) => void): Request<WAF.Types.UpdateRegexPatternSetResponse, AWSError>;
  /**
   * Inserts or deletes RegexPatternString objects in a RegexPatternSet. For each RegexPatternString object, you specify the following values:    Whether to insert or delete the RegexPatternString.   The regular expression pattern that you want to insert or delete. For more information, see RegexPatternSet.     For example, you can create a RegexPatternString such as B[a@]dB[o0]t. AWS WAF will match this RegexPatternString to:   BadBot   BadB0t   B@dBot   B@dB0t   To create and configure a RegexPatternSet, perform the following steps:   Create a RegexPatternSet. For more information, see CreateRegexPatternSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexPatternSet request.   Submit an UpdateRegexPatternSet request to specify the regular expression pattern that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateRegexPatternSet(callback?: (err: AWSError, data: WAF.Types.UpdateRegexPatternSetResponse) => void): Request<WAF.Types.UpdateRegexPatternSetResponse, AWSError>;
  /**
   * Inserts or deletes Predicate objects in a Rule. Each Predicate object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to allow, block, or count. If you add more than one predicate to a Rule, a request must match all of the specifications to be allowed, blocked, or counted. For example, suppose that you add the following to a Rule:    A ByteMatchSet that matches the value BadBot in the User-Agent header   An IPSet that matches the IP address 192.0.2.44    You then add the Rule to a WebACL and specify that you want to block requests that satisfy the Rule. For a request to be blocked, the User-Agent header in the request must contain the value BadBot and the request must originate from the IP address 192.0.2.44. To create and configure a Rule, perform the following steps:   Create and update the predicates that you want to include in the Rule.   Create the Rule. See CreateRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request.   Submit an UpdateRule request to add predicates to the Rule.   Create and update a WebACL that contains the Rule. See CreateWebACL.   If you want to replace one ByteMatchSet or IPSet with another, you delete the existing one and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateRule(params: WAF.Types.UpdateRuleRequest, callback?: (err: AWSError, data: WAF.Types.UpdateRuleResponse) => void): Request<WAF.Types.UpdateRuleResponse, AWSError>;
  /**
   * Inserts or deletes Predicate objects in a Rule. Each Predicate object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to allow, block, or count. If you add more than one predicate to a Rule, a request must match all of the specifications to be allowed, blocked, or counted. For example, suppose that you add the following to a Rule:    A ByteMatchSet that matches the value BadBot in the User-Agent header   An IPSet that matches the IP address 192.0.2.44    You then add the Rule to a WebACL and specify that you want to block requests that satisfy the Rule. For a request to be blocked, the User-Agent header in the request must contain the value BadBot and the request must originate from the IP address 192.0.2.44. To create and configure a Rule, perform the following steps:   Create and update the predicates that you want to include in the Rule.   Create the Rule. See CreateRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request.   Submit an UpdateRule request to add predicates to the Rule.   Create and update a WebACL that contains the Rule. See CreateWebACL.   If you want to replace one ByteMatchSet or IPSet with another, you delete the existing one and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateRule(callback?: (err: AWSError, data: WAF.Types.UpdateRuleResponse) => void): Request<WAF.Types.UpdateRuleResponse, AWSError>;
  /**
   * Inserts or deletes ActivatedRule objects in a RuleGroup. You can only insert REGULAR rules into a rule group. You can have a maximum of ten rules per rule group. To create and configure a RuleGroup, perform the following steps:   Create and update the Rules that you want to include in the RuleGroup. See CreateRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRuleGroup request.   Submit an UpdateRuleGroup request to add Rules to the RuleGroup.   Create and update a WebACL that contains the RuleGroup. See CreateWebACL.   If you want to replace one Rule with another, you delete the existing one and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateRuleGroup(params: WAF.Types.UpdateRuleGroupRequest, callback?: (err: AWSError, data: WAF.Types.UpdateRuleGroupResponse) => void): Request<WAF.Types.UpdateRuleGroupResponse, AWSError>;
  /**
   * Inserts or deletes ActivatedRule objects in a RuleGroup. You can only insert REGULAR rules into a rule group. You can have a maximum of ten rules per rule group. To create and configure a RuleGroup, perform the following steps:   Create and update the Rules that you want to include in the RuleGroup. See CreateRule.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRuleGroup request.   Submit an UpdateRuleGroup request to add Rules to the RuleGroup.   Create and update a WebACL that contains the RuleGroup. See CreateWebACL.   If you want to replace one Rule with another, you delete the existing one and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateRuleGroup(callback?: (err: AWSError, data: WAF.Types.UpdateRuleGroupResponse) => void): Request<WAF.Types.UpdateRuleGroupResponse, AWSError>;
  /**
   * Inserts or deletes SizeConstraint objects (filters) in a SizeConstraintSet. For each SizeConstraint object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change a SizeConstraintSetUpdate object, you delete the existing object and add a new one.   The part of a web request that you want AWS WAF to evaluate, such as the length of a query string or the length of the User-Agent header.   Whether to perform any transformations on the request, such as converting it to lowercase, before checking its length. Note that transformations of the request body are not supported because the AWS resource forwards only the first 8192 bytes of your request to AWS WAF. You can only specify a single type of TextTransformation.   A ComparisonOperator used for evaluating the selected part of the request against the specified Size, such as equals, greater than, less than, and so on.   The length, in bytes, that you want AWS WAF to watch for in selected part of the request. The length is computed after applying the transformation.   For example, you can add a SizeConstraintSetUpdate object that matches web requests in which the length of the User-Agent header is greater than 100 bytes. You can then configure AWS WAF to block those requests. To create and configure a SizeConstraintSet, perform the following steps:   Create a SizeConstraintSet. For more information, see CreateSizeConstraintSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSizeConstraintSet request.   Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateSizeConstraintSet(params: WAF.Types.UpdateSizeConstraintSetRequest, callback?: (err: AWSError, data: WAF.Types.UpdateSizeConstraintSetResponse) => void): Request<WAF.Types.UpdateSizeConstraintSetResponse, AWSError>;
  /**
   * Inserts or deletes SizeConstraint objects (filters) in a SizeConstraintSet. For each SizeConstraint object, you specify the following values:    Whether to insert or delete the object from the array. If you want to change a SizeConstraintSetUpdate object, you delete the existing object and add a new one.   The part of a web request that you want AWS WAF to evaluate, such as the length of a query string or the length of the User-Agent header.   Whether to perform any transformations on the request, such as converting it to lowercase, before checking its length. Note that transformations of the request body are not supported because the AWS resource forwards only the first 8192 bytes of your request to AWS WAF. You can only specify a single type of TextTransformation.   A ComparisonOperator used for evaluating the selected part of the request against the specified Size, such as equals, greater than, less than, and so on.   The length, in bytes, that you want AWS WAF to watch for in selected part of the request. The length is computed after applying the transformation.   For example, you can add a SizeConstraintSetUpdate object that matches web requests in which the length of the User-Agent header is greater than 100 bytes. You can then configure AWS WAF to block those requests. To create and configure a SizeConstraintSet, perform the following steps:   Create a SizeConstraintSet. For more information, see CreateSizeConstraintSet.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSizeConstraintSet request.   Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateSizeConstraintSet(callback?: (err: AWSError, data: WAF.Types.UpdateSizeConstraintSetResponse) => void): Request<WAF.Types.UpdateSizeConstraintSetResponse, AWSError>;
  /**
   * Inserts or deletes SqlInjectionMatchTuple objects (filters) in a SqlInjectionMatchSet. For each SqlInjectionMatchTuple object, you specify the following values:    Action: Whether to insert the object into or delete the object from the array. To change a SqlInjectionMatchTuple, you delete the existing object and add a new one.    FieldToMatch: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter.    TextTransformation: Which text transformation, if any, to perform on the web request before inspecting the request for snippets of malicious SQL code. You can only specify a single type of TextTransformation.   You use SqlInjectionMatchSet objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you're receiving requests that contain snippets of SQL code in the query string and you want to block the requests, you can create a SqlInjectionMatchSet with the applicable settings, and then configure AWS WAF to block the requests.  To create and configure a SqlInjectionMatchSet, perform the following steps:   Submit a CreateSqlInjectionMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request.   Submit an UpdateSqlInjectionMatchSet request to specify the parts of web requests that you want AWS WAF to inspect for snippets of SQL code.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateSqlInjectionMatchSet(params: WAF.Types.UpdateSqlInjectionMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.UpdateSqlInjectionMatchSetResponse) => void): Request<WAF.Types.UpdateSqlInjectionMatchSetResponse, AWSError>;
  /**
   * Inserts or deletes SqlInjectionMatchTuple objects (filters) in a SqlInjectionMatchSet. For each SqlInjectionMatchTuple object, you specify the following values:    Action: Whether to insert the object into or delete the object from the array. To change a SqlInjectionMatchTuple, you delete the existing object and add a new one.    FieldToMatch: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter.    TextTransformation: Which text transformation, if any, to perform on the web request before inspecting the request for snippets of malicious SQL code. You can only specify a single type of TextTransformation.   You use SqlInjectionMatchSet objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you're receiving requests that contain snippets of SQL code in the query string and you want to block the requests, you can create a SqlInjectionMatchSet with the applicable settings, and then configure AWS WAF to block the requests.  To create and configure a SqlInjectionMatchSet, perform the following steps:   Submit a CreateSqlInjectionMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request.   Submit an UpdateSqlInjectionMatchSet request to specify the parts of web requests that you want AWS WAF to inspect for snippets of SQL code.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateSqlInjectionMatchSet(callback?: (err: AWSError, data: WAF.Types.UpdateSqlInjectionMatchSetResponse) => void): Request<WAF.Types.UpdateSqlInjectionMatchSetResponse, AWSError>;
  /**
   * Inserts or deletes ActivatedRule objects in a WebACL. Each Rule identifies web requests that you want to allow, block, or count. When you update a WebACL, you specify the following values:   A default action for the WebACL, either ALLOW or BLOCK. AWS WAF performs the default action if a request doesn't match the criteria in any of the Rules in a WebACL.   The Rules that you want to add or delete. If you want to replace one Rule with another, you delete the existing Rule and add the new one.   For each Rule, whether you want AWS WAF to allow requests, block requests, or count requests that match the conditions in the Rule.   The order in which you want AWS WAF to evaluate the Rules in a WebACL. If you add more than one Rule to a WebACL, AWS WAF evaluates each request against the Rules in order based on the value of Priority. (The Rule that has the lowest value for Priority is evaluated first.) When a web request matches all the predicates (such as ByteMatchSets and IPSets) in a Rule, AWS WAF immediately takes the corresponding action, allow or block, and doesn't evaluate the request against the remaining Rules in the WebACL, if any.    To create and configure a WebACL, perform the following steps:   Create and update the predicates that you want to include in Rules. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet.   Create and update the Rules that you want to include in the WebACL. For more information, see CreateRule and UpdateRule.   Create a WebACL. See CreateWebACL.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateWebACL request.   Submit an UpdateWebACL request to specify the Rules that you want to include in the WebACL, to specify the default action, and to associate the WebACL with a CloudFront distribution.  The ActivatedRule can be a rule group. If you specify a rule group as your ActivatedRule, you can exclude specific rules from that rule group. If you already have a rule group associated with a web ACL and want to submit an UpdateWebACL request to exclude certain rules from that rule group, you must first remove the rule group from the web ACL, the re-insert it again, specifying the excluded rules. For details, see ActivatedRule$ExcludedRules.    Be aware that if you try to add a RATE_BASED rule to a web ACL without setting the rule type when first creating the rule, the UpdateWebACL request will fail because the request tries to add a REGULAR rule (the default rule type) with the specified ID, which does not exist.  For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateWebACL(params: WAF.Types.UpdateWebACLRequest, callback?: (err: AWSError, data: WAF.Types.UpdateWebACLResponse) => void): Request<WAF.Types.UpdateWebACLResponse, AWSError>;
  /**
   * Inserts or deletes ActivatedRule objects in a WebACL. Each Rule identifies web requests that you want to allow, block, or count. When you update a WebACL, you specify the following values:   A default action for the WebACL, either ALLOW or BLOCK. AWS WAF performs the default action if a request doesn't match the criteria in any of the Rules in a WebACL.   The Rules that you want to add or delete. If you want to replace one Rule with another, you delete the existing Rule and add the new one.   For each Rule, whether you want AWS WAF to allow requests, block requests, or count requests that match the conditions in the Rule.   The order in which you want AWS WAF to evaluate the Rules in a WebACL. If you add more than one Rule to a WebACL, AWS WAF evaluates each request against the Rules in order based on the value of Priority. (The Rule that has the lowest value for Priority is evaluated first.) When a web request matches all the predicates (such as ByteMatchSets and IPSets) in a Rule, AWS WAF immediately takes the corresponding action, allow or block, and doesn't evaluate the request against the remaining Rules in the WebACL, if any.    To create and configure a WebACL, perform the following steps:   Create and update the predicates that you want to include in Rules. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet.   Create and update the Rules that you want to include in the WebACL. For more information, see CreateRule and UpdateRule.   Create a WebACL. See CreateWebACL.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateWebACL request.   Submit an UpdateWebACL request to specify the Rules that you want to include in the WebACL, to specify the default action, and to associate the WebACL with a CloudFront distribution.  The ActivatedRule can be a rule group. If you specify a rule group as your ActivatedRule, you can exclude specific rules from that rule group. If you already have a rule group associated with a web ACL and want to submit an UpdateWebACL request to exclude certain rules from that rule group, you must first remove the rule group from the web ACL, the re-insert it again, specifying the excluded rules. For details, see ActivatedRule$ExcludedRules.    Be aware that if you try to add a RATE_BASED rule to a web ACL without setting the rule type when first creating the rule, the UpdateWebACL request will fail because the request tries to add a REGULAR rule (the default rule type) with the specified ID, which does not exist.  For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateWebACL(callback?: (err: AWSError, data: WAF.Types.UpdateWebACLResponse) => void): Request<WAF.Types.UpdateWebACLResponse, AWSError>;
  /**
   * Inserts or deletes XssMatchTuple objects (filters) in an XssMatchSet. For each XssMatchTuple object, you specify the following values:    Action: Whether to insert the object into or delete the object from the array. To change an XssMatchTuple, you delete the existing object and add a new one.    FieldToMatch: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter.    TextTransformation: Which text transformation, if any, to perform on the web request before inspecting the request for cross-site scripting attacks. You can only specify a single type of TextTransformation.   You use XssMatchSet objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you're receiving requests that contain cross-site scripting attacks in the request body and you want to block the requests, you can create an XssMatchSet with the applicable settings, and then configure AWS WAF to block the requests.  To create and configure an XssMatchSet, perform the following steps:   Submit a CreateXssMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request.   Submit an UpdateXssMatchSet request to specify the parts of web requests that you want AWS WAF to inspect for cross-site scripting attacks.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateXssMatchSet(params: WAF.Types.UpdateXssMatchSetRequest, callback?: (err: AWSError, data: WAF.Types.UpdateXssMatchSetResponse) => void): Request<WAF.Types.UpdateXssMatchSetResponse, AWSError>;
  /**
   * Inserts or deletes XssMatchTuple objects (filters) in an XssMatchSet. For each XssMatchTuple object, you specify the following values:    Action: Whether to insert the object into or delete the object from the array. To change an XssMatchTuple, you delete the existing object and add a new one.    FieldToMatch: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter.    TextTransformation: Which text transformation, if any, to perform on the web request before inspecting the request for cross-site scripting attacks. You can only specify a single type of TextTransformation.   You use XssMatchSet objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you're receiving requests that contain cross-site scripting attacks in the request body and you want to block the requests, you can create an XssMatchSet with the applicable settings, and then configure AWS WAF to block the requests.  To create and configure an XssMatchSet, perform the following steps:   Submit a CreateXssMatchSet request.   Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request.   Submit an UpdateXssMatchSet request to specify the parts of web requests that you want AWS WAF to inspect for cross-site scripting attacks.   For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
   */
  updateXssMatchSet(callback?: (err: AWSError, data: WAF.Types.UpdateXssMatchSetResponse) => void): Request<WAF.Types.UpdateXssMatchSetResponse, AWSError>;
}
declare namespace WAF {
  export type Action = string;
  export interface ActivatedRule {
    /**
     * Specifies the order in which the Rules in a WebACL are evaluated. Rules with a lower value for Priority are evaluated before Rules with a higher value. The value must be a unique integer. If you add multiple Rules to a WebACL, the values don't need to be consecutive.
     */
    Priority: RulePriority;
    /**
     * The RuleId for a Rule. You use RuleId to get more information about a Rule (see GetRule), update a Rule (see UpdateRule), insert a Rule into a WebACL or delete a one from a WebACL (see UpdateWebACL), or delete a Rule from AWS WAF (see DeleteRule).  RuleId is returned by CreateRule and by ListRules.
     */
    RuleId: ResourceId;
    /**
     * Specifies the action that CloudFront or AWS WAF takes when a web request matches the conditions in the Rule. Valid values for Action include the following:    ALLOW: CloudFront responds with the requested object.    BLOCK: CloudFront responds with an HTTP 403 (Forbidden) status code.    COUNT: AWS WAF increments a counter of requests that match the conditions in the rule and then continues to inspect the web request based on the remaining rules in the web ACL.     ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL. In this case, you do not use ActivatedRule|Action. For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction.
     */
    Action?: WafAction;
    /**
     * Use the OverrideAction to test your RuleGroup. Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None, the RuleGroup will block a request if any individual rule in the RuleGroup matches the request and is configured to block that request. However if you first want to test the RuleGroup, set the OverrideAction to Count. The RuleGroup will then override any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests will be counted. You can view a record of counted requests using GetSampledRequests.   ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL. In this case you do not use ActivatedRule|Action. For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction.
     */
    OverrideAction?: WafOverrideAction;
    /**
     * The rule type, either REGULAR, as defined by Rule, RATE_BASED, as defined by RateBasedRule, or GROUP, as defined by RuleGroup. The default is REGULAR. Although this field is optional, be aware that if you try to add a RATE_BASED rule to a web ACL without setting the type, the UpdateWebACL request will fail because the request tries to add a REGULAR rule with the specified ID, which does not exist. 
     */
    Type?: WafRuleType;
    /**
     * An array of rules to exclude from a rule group. This is applicable only when the ActivatedRule refers to a RuleGroup. Sometimes it is necessary to troubleshoot rule groups that are blocking traffic unexpectedly (false positives). One troubleshooting technique is to identify the specific rule within the rule group that is blocking the legitimate traffic and then disable (exclude) that particular rule. You can exclude rules from both your own rule groups and AWS Marketplace rule groups that have been associated with a web ACL. Specifying ExcludedRules does not remove those rules from the rule group. Rather, it changes the action for the rules to COUNT. Therefore, requests that match an ExcludedRule are counted but not blocked. The RuleGroup owner will receive COUNT metrics for each ExcludedRule. If you want to exclude rules from a rule group that is already associated with a web ACL, perform the following steps:   Use the AWS WAF logs to identify the IDs of the rules that you want to exclude. For more information about the logs, see Logging Web ACL Traffic Information.   Submit an UpdateWebACL request that has two actions:   The first action deletes the existing rule group from the web ACL. That is, in the UpdateWebACL request, the first Updates:Action should be DELETE and Updates:ActivatedRule:RuleId should be the rule group that contains the rules that you want to exclude.   The second action inserts the same rule group back in, but specifying the rules to exclude. That is, the second Updates:Action should be INSERT, Updates:ActivatedRule:RuleId should be the rule group that you just removed, and ExcludedRules should contain the rules that you want to exclude.    
     */
    ExcludedRules?: ExcludedRules;
  }
  export type ActivatedRules = ActivatedRule[];
  export interface ByteMatchSet {
    /**
     * The ByteMatchSetId for a ByteMatchSet. You use ByteMatchSetId to get information about a ByteMatchSet (see GetByteMatchSet), update a ByteMatchSet (see UpdateByteMatchSet), insert a ByteMatchSet into a Rule or delete one from a Rule (see UpdateRule), and delete a ByteMatchSet from AWS WAF (see DeleteByteMatchSet).  ByteMatchSetId is returned by CreateByteMatchSet and by ListByteMatchSets.
     */
    ByteMatchSetId: ResourceId;
    /**
     * A friendly name or description of the ByteMatchSet. You can't change Name after you create a ByteMatchSet.
     */
    Name?: ResourceName;
    /**
     * Specifies the bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to search for in web requests, the location in requests that you want AWS WAF to search, and other settings.
     */
    ByteMatchTuples: ByteMatchTuples;
  }
  export type ByteMatchSetSummaries = ByteMatchSetSummary[];
  export interface ByteMatchSetSummary {
    /**
     * The ByteMatchSetId for a ByteMatchSet. You use ByteMatchSetId to get information about a ByteMatchSet, update a ByteMatchSet, remove a ByteMatchSet from a Rule, and delete a ByteMatchSet from AWS WAF.  ByteMatchSetId is returned by CreateByteMatchSet and by ListByteMatchSets.
     */
    ByteMatchSetId: ResourceId;
    /**
     * A friendly name or description of the ByteMatchSet. You can't change Name after you create a ByteMatchSet.
     */
    Name: ResourceName;
  }
  export interface ByteMatchSetUpdate {
    /**
     * Specifies whether to insert or delete a ByteMatchTuple.
     */
    Action: ChangeAction;
    /**
     * Information about the part of a web request that you want AWS WAF to inspect and the value that you want AWS WAF to search for. If you specify DELETE for the value of Action, the ByteMatchTuple values must exactly match the values in the ByteMatchTuple that you want to delete from the ByteMatchSet.
     */
    ByteMatchTuple: ByteMatchTuple;
  }
  export type ByteMatchSetUpdates = ByteMatchSetUpdate[];
  export type ByteMatchTargetString = Buffer|Uint8Array|Blob|string;
  export interface ByteMatchTuple {
    /**
     * The part of a web request that you want AWS WAF to search, such as a specified header or a query string. For more information, see FieldToMatch.
     */
    FieldToMatch: FieldToMatch;
    /**
     * The value that you want AWS WAF to search for. AWS WAF searches for the specified string in the part of web requests that you specified in FieldToMatch. The maximum length of the value is 50 bytes. Valid values depend on the values that you specified for FieldToMatch:    HEADER: The value that you want AWS WAF to search for in the request header that you specified in FieldToMatch, for example, the value of the User-Agent or Referer header.    METHOD: The HTTP method, which indicates the type of operation specified in the request. CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT.    QUERY_STRING: The value that you want AWS WAF to search for in the query string, which is the part of a URL that appears after a ? character.    URI: The value that you want AWS WAF to search for in the part of a URL that identifies a resource, for example, /images/daily-ad.jpg.    BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. For more information, see CreateSizeConstraintSet.     SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as UserName or SalesRegion. The maximum length for SINGLE_QUERY_ARG is 30 characters.    ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but instead of inspecting a single parameter, AWS WAF inspects all parameters within the query string for the value or regex pattern that you specify in TargetString.   If TargetString includes alphabetic characters A-Z and a-z, note that the value is case sensitive.  If you're using the AWS WAF API  Specify a base64-encoded version of the value. The maximum length of the value before you base64-encode it is 50 bytes. For example, suppose the value of Type is HEADER and the value of Data is User-Agent. If you want to search the User-Agent header for the value BadBot, you base64-encode BadBot using MIME base64-encoding and include the resulting value, QmFkQm90, in the value of TargetString.  If you're using the AWS CLI or one of the AWS SDKs  The value that you want AWS WAF to search for. The SDK automatically base64 encodes the value.
     */
    TargetString: ByteMatchTargetString;
    /**
     * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on TargetString before inspecting a request for a match. You can only specify a single type of TextTransformation.  CMD_LINE  When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations:   Delete the following characters: \ " ' ^   Delete spaces before the following characters: / (   Replace the following characters with a space: , ;   Replace multiple spaces with one space   Convert uppercase letters (A-Z) to lowercase (a-z)    COMPRESS_WHITE_SPACE  Use this option to replace the following characters with a space character (decimal 32):   \f, formfeed, decimal 12   \t, tab, decimal 9   \n, newline, decimal 10   \r, carriage return, decimal 13   \v, vertical tab, decimal 11   non-breaking space, decimal 160    COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.  HTML_ENTITY_DECODE  Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations:   Replaces (ampersand)quot; with "    Replaces (ampersand)nbsp; with a non-breaking space, decimal 160   Replaces (ampersand)lt; with a "less than" symbol   Replaces (ampersand)gt; with &gt;    Replaces characters that are represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding characters   Replaces characters that are represented in decimal format, (ampersand)#nnnn;, with the corresponding characters    LOWERCASE  Use this option to convert uppercase letters (A-Z) to lowercase (a-z).  URL_DECODE  Use this option to decode a URL-encoded value.  NONE  Specify NONE if you don't want to perform any text transformations.
     */
    TextTransformation: TextTransformation;
    /**
     * Within the portion of a web request that you want to search (for example, in the query string, if any), specify where you want AWS WAF to search. Valid values include the following:  CONTAINS  The specified part of the web request must include the value of TargetString, but the location doesn't matter.  CONTAINS_WORD  The specified part of the web request must include the value of TargetString, and TargetString must contain only alphanumeric characters or underscore (A-Z, a-z, 0-9, or _). In addition, TargetString must be a word, which means one of the following:    TargetString exactly matches the value of the specified part of the web request, such as the value of a header.    TargetString is at the beginning of the specified part of the web request and is followed by a character other than an alphanumeric character or underscore (_), for example, BadBot;.    TargetString is at the end of the specified part of the web request and is preceded by a character other than an alphanumeric character or underscore (_), for example, ;BadBot.    TargetString is in the middle of the specified part of the web request and is preceded and followed by characters other than alphanumeric characters or underscore (_), for example, -BadBot;.    EXACTLY  The value of the specified part of the web request must exactly match the value of TargetString.  STARTS_WITH  The value of TargetString must appear at the beginning of the specified part of the web request.  ENDS_WITH  The value of TargetString must appear at the end of the specified part of the web request.
     */
    PositionalConstraint: PositionalConstraint;
  }
  export type ByteMatchTuples = ByteMatchTuple[];
  export type ChangeAction = "INSERT"|"DELETE"|string;
  export type ChangeToken = string;
  export type ChangeTokenStatus = "PROVISIONED"|"PENDING"|"INSYNC"|string;
  export type ComparisonOperator = "EQ"|"NE"|"LE"|"LT"|"GE"|"GT"|string;
  export type Country = string;
  export interface CreateByteMatchSetRequest {
    /**
     * A friendly name or description of the ByteMatchSet. You can't change Name after you create a ByteMatchSet.
     */
    Name: ResourceName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface CreateByteMatchSetResponse {
    /**
     * A ByteMatchSet that contains no ByteMatchTuple objects.
     */
    ByteMatchSet?: ByteMatchSet;
    /**
     * The ChangeToken that you used to submit the CreateByteMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateGeoMatchSetRequest {
    /**
     * A friendly name or description of the GeoMatchSet. You can't change Name after you create the GeoMatchSet.
     */
    Name: ResourceName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface CreateGeoMatchSetResponse {
    /**
     * The GeoMatchSet returned in the CreateGeoMatchSet response. The GeoMatchSet contains no GeoMatchConstraints.
     */
    GeoMatchSet?: GeoMatchSet;
    /**
     * The ChangeToken that you used to submit the CreateGeoMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateIPSetRequest {
    /**
     * A friendly name or description of the IPSet. You can't change Name after you create the IPSet.
     */
    Name: ResourceName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface CreateIPSetResponse {
    /**
     * The IPSet returned in the CreateIPSet response.
     */
    IPSet?: IPSet;
    /**
     * The ChangeToken that you used to submit the CreateIPSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateRateBasedRuleRequest {
    /**
     * A friendly name or description of the RateBasedRule. You can't change the name of a RateBasedRule after you create it.
     */
    Name: ResourceName;
    /**
     * A friendly name or description for the metrics for this RateBasedRule. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change the name of the metric after you create the RateBasedRule.
     */
    MetricName: MetricName;
    /**
     * The field that AWS WAF uses to determine if requests are likely arriving from a single source and thus subject to rate monitoring. The only valid value for RateKey is IP. IP indicates that requests that arrive from the same IP address are subject to the RateLimit that is specified in the RateBasedRule.
     */
    RateKey: RateKey;
    /**
     * The maximum number of requests, which have an identical value in the field that is specified by RateKey, allowed in a five-minute period. If the number of requests exceeds the RateLimit and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.
     */
    RateLimit: RateLimit;
    /**
     * The ChangeToken that you used to submit the CreateRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken: ChangeToken;
    Tags?: TagList;
  }
  export interface CreateRateBasedRuleResponse {
    /**
     * The RateBasedRule that is returned in the CreateRateBasedRule response.
     */
    Rule?: RateBasedRule;
    /**
     * The ChangeToken that you used to submit the CreateRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateRegexMatchSetRequest {
    /**
     * A friendly name or description of the RegexMatchSet. You can't change Name after you create a RegexMatchSet.
     */
    Name: ResourceName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface CreateRegexMatchSetResponse {
    /**
     * A RegexMatchSet that contains no RegexMatchTuple objects.
     */
    RegexMatchSet?: RegexMatchSet;
    /**
     * The ChangeToken that you used to submit the CreateRegexMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateRegexPatternSetRequest {
    /**
     * A friendly name or description of the RegexPatternSet. You can't change Name after you create a RegexPatternSet.
     */
    Name: ResourceName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface CreateRegexPatternSetResponse {
    /**
     * A RegexPatternSet that contains no objects.
     */
    RegexPatternSet?: RegexPatternSet;
    /**
     * The ChangeToken that you used to submit the CreateRegexPatternSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateRuleGroupRequest {
    /**
     * A friendly name or description of the RuleGroup. You can't change Name after you create a RuleGroup.
     */
    Name: ResourceName;
    /**
     * A friendly name or description for the metrics for this RuleGroup. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change the name of the metric after you create the RuleGroup.
     */
    MetricName: MetricName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    Tags?: TagList;
  }
  export interface CreateRuleGroupResponse {
    /**
     * An empty RuleGroup.
     */
    RuleGroup?: RuleGroup;
    /**
     * The ChangeToken that you used to submit the CreateRuleGroup request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateRuleRequest {
    /**
     * A friendly name or description of the Rule. You can't change the name of a Rule after you create it.
     */
    Name: ResourceName;
    /**
     * A friendly name or description for the metrics for this Rule. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change the name of the metric after you create the Rule.
     */
    MetricName: MetricName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    Tags?: TagList;
  }
  export interface CreateRuleResponse {
    /**
     * The Rule returned in the CreateRule response.
     */
    Rule?: Rule;
    /**
     * The ChangeToken that you used to submit the CreateRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateSizeConstraintSetRequest {
    /**
     * A friendly name or description of the SizeConstraintSet. You can't change Name after you create a SizeConstraintSet.
     */
    Name: ResourceName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface CreateSizeConstraintSetResponse {
    /**
     * A SizeConstraintSet that contains no SizeConstraint objects.
     */
    SizeConstraintSet?: SizeConstraintSet;
    /**
     * The ChangeToken that you used to submit the CreateSizeConstraintSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateSqlInjectionMatchSetRequest {
    /**
     * A friendly name or description for the SqlInjectionMatchSet that you're creating. You can't change Name after you create the SqlInjectionMatchSet.
     */
    Name: ResourceName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface CreateSqlInjectionMatchSetResponse {
    /**
     * A SqlInjectionMatchSet.
     */
    SqlInjectionMatchSet?: SqlInjectionMatchSet;
    /**
     * The ChangeToken that you used to submit the CreateSqlInjectionMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateWebACLRequest {
    /**
     * A friendly name or description of the WebACL. You can't change Name after you create the WebACL.
     */
    Name: ResourceName;
    /**
     * A friendly name or description for the metrics for this WebACL.The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change MetricName after you create the WebACL.
     */
    MetricName: MetricName;
    /**
     * The action that you want AWS WAF to take when a request doesn't match the criteria specified in any of the Rule objects that are associated with the WebACL.
     */
    DefaultAction: WafAction;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    Tags?: TagList;
  }
  export interface CreateWebACLResponse {
    /**
     * The WebACL returned in the CreateWebACL response.
     */
    WebACL?: WebACL;
    /**
     * The ChangeToken that you used to submit the CreateWebACL request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface CreateXssMatchSetRequest {
    /**
     * A friendly name or description for the XssMatchSet that you're creating. You can't change Name after you create the XssMatchSet.
     */
    Name: ResourceName;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface CreateXssMatchSetResponse {
    /**
     * An XssMatchSet.
     */
    XssMatchSet?: XssMatchSet;
    /**
     * The ChangeToken that you used to submit the CreateXssMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteByteMatchSetRequest {
    /**
     * The ByteMatchSetId of the ByteMatchSet that you want to delete. ByteMatchSetId is returned by CreateByteMatchSet and by ListByteMatchSets.
     */
    ByteMatchSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteByteMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the DeleteByteMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteGeoMatchSetRequest {
    /**
     * The GeoMatchSetID of the GeoMatchSet that you want to delete. GeoMatchSetId is returned by CreateGeoMatchSet and by ListGeoMatchSets.
     */
    GeoMatchSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteGeoMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the DeleteGeoMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteIPSetRequest {
    /**
     * The IPSetId of the IPSet that you want to delete. IPSetId is returned by CreateIPSet and by ListIPSets.
     */
    IPSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteIPSetResponse {
    /**
     * The ChangeToken that you used to submit the DeleteIPSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteLoggingConfigurationRequest {
    /**
     * The Amazon Resource Name (ARN) of the web ACL from which you want to delete the LoggingConfiguration.
     */
    ResourceArn: ResourceArn;
  }
  export interface DeleteLoggingConfigurationResponse {
  }
  export interface DeletePermissionPolicyRequest {
    /**
     * The Amazon Resource Name (ARN) of the RuleGroup from which you want to delete the policy. The user making the request must be the owner of the RuleGroup.
     */
    ResourceArn: ResourceArn;
  }
  export interface DeletePermissionPolicyResponse {
  }
  export interface DeleteRateBasedRuleRequest {
    /**
     * The RuleId of the RateBasedRule that you want to delete. RuleId is returned by CreateRateBasedRule and by ListRateBasedRules.
     */
    RuleId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteRateBasedRuleResponse {
    /**
     * The ChangeToken that you used to submit the DeleteRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteRegexMatchSetRequest {
    /**
     * The RegexMatchSetId of the RegexMatchSet that you want to delete. RegexMatchSetId is returned by CreateRegexMatchSet and by ListRegexMatchSets.
     */
    RegexMatchSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteRegexMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the DeleteRegexMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteRegexPatternSetRequest {
    /**
     * The RegexPatternSetId of the RegexPatternSet that you want to delete. RegexPatternSetId is returned by CreateRegexPatternSet and by ListRegexPatternSets.
     */
    RegexPatternSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteRegexPatternSetResponse {
    /**
     * The ChangeToken that you used to submit the DeleteRegexPatternSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteRuleGroupRequest {
    /**
     * The RuleGroupId of the RuleGroup that you want to delete. RuleGroupId is returned by CreateRuleGroup and by ListRuleGroups.
     */
    RuleGroupId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteRuleGroupResponse {
    /**
     * The ChangeToken that you used to submit the DeleteRuleGroup request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteRuleRequest {
    /**
     * The RuleId of the Rule that you want to delete. RuleId is returned by CreateRule and by ListRules.
     */
    RuleId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteRuleResponse {
    /**
     * The ChangeToken that you used to submit the DeleteRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteSizeConstraintSetRequest {
    /**
     * The SizeConstraintSetId of the SizeConstraintSet that you want to delete. SizeConstraintSetId is returned by CreateSizeConstraintSet and by ListSizeConstraintSets.
     */
    SizeConstraintSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteSizeConstraintSetResponse {
    /**
     * The ChangeToken that you used to submit the DeleteSizeConstraintSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteSqlInjectionMatchSetRequest {
    /**
     * The SqlInjectionMatchSetId of the SqlInjectionMatchSet that you want to delete. SqlInjectionMatchSetId is returned by CreateSqlInjectionMatchSet and by ListSqlInjectionMatchSets.
     */
    SqlInjectionMatchSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteSqlInjectionMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the DeleteSqlInjectionMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteWebACLRequest {
    /**
     * The WebACLId of the WebACL that you want to delete. WebACLId is returned by CreateWebACL and by ListWebACLs.
     */
    WebACLId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteWebACLResponse {
    /**
     * The ChangeToken that you used to submit the DeleteWebACL request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface DeleteXssMatchSetRequest {
    /**
     * The XssMatchSetId of the XssMatchSet that you want to delete. XssMatchSetId is returned by CreateXssMatchSet and by ListXssMatchSets.
     */
    XssMatchSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface DeleteXssMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the DeleteXssMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface ExcludedRule {
    /**
     * The unique identifier for the rule to exclude from the rule group.
     */
    RuleId: ResourceId;
  }
  export type ExcludedRules = ExcludedRule[];
  export interface FieldToMatch {
    /**
     * The part of the web request that you want AWS WAF to search for a specified string. Parts of a request that you can search include the following:    HEADER: A specified request header, for example, the value of the User-Agent or Referer header. If you choose HEADER for the type, specify the name of the header in Data.    METHOD: The HTTP method, which indicated the type of operation that the request is asking the origin to perform. Amazon CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT.    QUERY_STRING: A query string, which is the part of a URL that appears after a ? character, if any.    URI: The part of a web request that identifies a resource, for example, /images/daily-ad.jpg.    BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. For more information, see CreateSizeConstraintSet.     SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as UserName or SalesRegion. The maximum length for SINGLE_QUERY_ARG is 30 characters.    ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but rather than inspecting a single parameter, AWS WAF will inspect all parameters within the query for the value or regex pattern that you specify in TargetString.  
     */
    Type: MatchFieldType;
    /**
     * When the value of Type is HEADER, enter the name of the header that you want AWS WAF to search, for example, User-Agent or Referer. The name of the header is not case sensitive. When the value of Type is SINGLE_QUERY_ARG, enter the name of the parameter that you want AWS WAF to search, for example, UserName or SalesRegion. The parameter name is not case sensitive. If the value of Type is any other value, omit Data.
     */
    Data?: MatchFieldData;
  }
  export interface GeoMatchConstraint {
    /**
     * The type of geographical area you want AWS WAF to search for. Currently Country is the only valid value.
     */
    Type: GeoMatchConstraintType;
    /**
     * The country that you want AWS WAF to search for.
     */
    Value: GeoMatchConstraintValue;
  }
  export type GeoMatchConstraintType = "Country"|string;
  export type GeoMatchConstraintValue = "AF"|"AX"|"AL"|"DZ"|"AS"|"AD"|"AO"|"AI"|"AQ"|"AG"|"AR"|"AM"|"AW"|"AU"|"AT"|"AZ"|"BS"|"BH"|"BD"|"BB"|"BY"|"BE"|"BZ"|"BJ"|"BM"|"BT"|"BO"|"BQ"|"BA"|"BW"|"BV"|"BR"|"IO"|"BN"|"BG"|"BF"|"BI"|"KH"|"CM"|"CA"|"CV"|"KY"|"CF"|"TD"|"CL"|"CN"|"CX"|"CC"|"CO"|"KM"|"CG"|"CD"|"CK"|"CR"|"CI"|"HR"|"CU"|"CW"|"CY"|"CZ"|"DK"|"DJ"|"DM"|"DO"|"EC"|"EG"|"SV"|"GQ"|"ER"|"EE"|"ET"|"FK"|"FO"|"FJ"|"FI"|"FR"|"GF"|"PF"|"TF"|"GA"|"GM"|"GE"|"DE"|"GH"|"GI"|"GR"|"GL"|"GD"|"GP"|"GU"|"GT"|"GG"|"GN"|"GW"|"GY"|"HT"|"HM"|"VA"|"HN"|"HK"|"HU"|"IS"|"IN"|"ID"|"IR"|"IQ"|"IE"|"IM"|"IL"|"IT"|"JM"|"JP"|"JE"|"JO"|"KZ"|"KE"|"KI"|"KP"|"KR"|"KW"|"KG"|"LA"|"LV"|"LB"|"LS"|"LR"|"LY"|"LI"|"LT"|"LU"|"MO"|"MK"|"MG"|"MW"|"MY"|"MV"|"ML"|"MT"|"MH"|"MQ"|"MR"|"MU"|"YT"|"MX"|"FM"|"MD"|"MC"|"MN"|"ME"|"MS"|"MA"|"MZ"|"MM"|"NA"|"NR"|"NP"|"NL"|"NC"|"NZ"|"NI"|"NE"|"NG"|"NU"|"NF"|"MP"|"NO"|"OM"|"PK"|"PW"|"PS"|"PA"|"PG"|"PY"|"PE"|"PH"|"PN"|"PL"|"PT"|"PR"|"QA"|"RE"|"RO"|"RU"|"RW"|"BL"|"SH"|"KN"|"LC"|"MF"|"PM"|"VC"|"WS"|"SM"|"ST"|"SA"|"SN"|"RS"|"SC"|"SL"|"SG"|"SX"|"SK"|"SI"|"SB"|"SO"|"ZA"|"GS"|"SS"|"ES"|"LK"|"SD"|"SR"|"SJ"|"SZ"|"SE"|"CH"|"SY"|"TW"|"TJ"|"TZ"|"TH"|"TL"|"TG"|"TK"|"TO"|"TT"|"TN"|"TR"|"TM"|"TC"|"TV"|"UG"|"UA"|"AE"|"GB"|"US"|"UM"|"UY"|"UZ"|"VU"|"VE"|"VN"|"VG"|"VI"|"WF"|"EH"|"YE"|"ZM"|"ZW"|string;
  export type GeoMatchConstraints = GeoMatchConstraint[];
  export interface GeoMatchSet {
    /**
     * The GeoMatchSetId for an GeoMatchSet. You use GeoMatchSetId to get information about a GeoMatchSet (see GeoMatchSet), update a GeoMatchSet (see UpdateGeoMatchSet), insert a GeoMatchSet into a Rule or delete one from a Rule (see UpdateRule), and delete a GeoMatchSet from AWS WAF (see DeleteGeoMatchSet).  GeoMatchSetId is returned by CreateGeoMatchSet and by ListGeoMatchSets.
     */
    GeoMatchSetId: ResourceId;
    /**
     * A friendly name or description of the GeoMatchSet. You can't change the name of an GeoMatchSet after you create it.
     */
    Name?: ResourceName;
    /**
     * An array of GeoMatchConstraint objects, which contain the country that you want AWS WAF to search for.
     */
    GeoMatchConstraints: GeoMatchConstraints;
  }
  export type GeoMatchSetSummaries = GeoMatchSetSummary[];
  export interface GeoMatchSetSummary {
    /**
     * The GeoMatchSetId for an GeoMatchSet. You can use GeoMatchSetId in a GetGeoMatchSet request to get detailed information about an GeoMatchSet.
     */
    GeoMatchSetId: ResourceId;
    /**
     * A friendly name or description of the GeoMatchSet. You can't change the name of an GeoMatchSet after you create it.
     */
    Name: ResourceName;
  }
  export interface GeoMatchSetUpdate {
    /**
     * Specifies whether to insert or delete a country with UpdateGeoMatchSet.
     */
    Action: ChangeAction;
    /**
     * The country from which web requests originate that you want AWS WAF to search for.
     */
    GeoMatchConstraint: GeoMatchConstraint;
  }
  export type GeoMatchSetUpdates = GeoMatchSetUpdate[];
  export interface GetByteMatchSetRequest {
    /**
     * The ByteMatchSetId of the ByteMatchSet that you want to get. ByteMatchSetId is returned by CreateByteMatchSet and by ListByteMatchSets.
     */
    ByteMatchSetId: ResourceId;
  }
  export interface GetByteMatchSetResponse {
    /**
     * Information about the ByteMatchSet that you specified in the GetByteMatchSet request. For more information, see the following topics:    ByteMatchSet: Contains ByteMatchSetId, ByteMatchTuples, and Name     ByteMatchTuples: Contains an array of ByteMatchTuple objects. Each ByteMatchTuple object contains FieldToMatch, PositionalConstraint, TargetString, and TextTransformation     FieldToMatch: Contains Data and Type   
     */
    ByteMatchSet?: ByteMatchSet;
  }
  export interface GetChangeTokenRequest {
  }
  export interface GetChangeTokenResponse {
    /**
     * The ChangeToken that you used in the request. Use this value in a GetChangeTokenStatus request to get the current status of the request. 
     */
    ChangeToken?: ChangeToken;
  }
  export interface GetChangeTokenStatusRequest {
    /**
     * The change token for which you want to get the status. This change token was previously returned in the GetChangeToken response.
     */
    ChangeToken: ChangeToken;
  }
  export interface GetChangeTokenStatusResponse {
    /**
     * The status of the change token.
     */
    ChangeTokenStatus?: ChangeTokenStatus;
  }
  export interface GetGeoMatchSetRequest {
    /**
     * The GeoMatchSetId of the GeoMatchSet that you want to get. GeoMatchSetId is returned by CreateGeoMatchSet and by ListGeoMatchSets.
     */
    GeoMatchSetId: ResourceId;
  }
  export interface GetGeoMatchSetResponse {
    /**
     * Information about the GeoMatchSet that you specified in the GetGeoMatchSet request. This includes the Type, which for a GeoMatchContraint is always Country, as well as the Value, which is the identifier for a specific country.
     */
    GeoMatchSet?: GeoMatchSet;
  }
  export interface GetIPSetRequest {
    /**
     * The IPSetId of the IPSet that you want to get. IPSetId is returned by CreateIPSet and by ListIPSets.
     */
    IPSetId: ResourceId;
  }
  export interface GetIPSetResponse {
    /**
     * Information about the IPSet that you specified in the GetIPSet request. For more information, see the following topics:    IPSet: Contains IPSetDescriptors, IPSetId, and Name     IPSetDescriptors: Contains an array of IPSetDescriptor objects. Each IPSetDescriptor object contains Type and Value   
     */
    IPSet?: IPSet;
  }
  export interface GetLoggingConfigurationRequest {
    /**
     * The Amazon Resource Name (ARN) of the web ACL for which you want to get the LoggingConfiguration.
     */
    ResourceArn: ResourceArn;
  }
  export interface GetLoggingConfigurationResponse {
    /**
     * The LoggingConfiguration for the specified web ACL.
     */
    LoggingConfiguration?: LoggingConfiguration;
  }
  export interface GetPermissionPolicyRequest {
    /**
     * The Amazon Resource Name (ARN) of the RuleGroup for which you want to get the policy.
     */
    ResourceArn: ResourceArn;
  }
  export interface GetPermissionPolicyResponse {
    /**
     * The IAM policy attached to the specified RuleGroup.
     */
    Policy?: PolicyString;
  }
  export interface GetRateBasedRuleManagedKeysRequest {
    /**
     * The RuleId of the RateBasedRule for which you want to get a list of ManagedKeys. RuleId is returned by CreateRateBasedRule and by ListRateBasedRules.
     */
    RuleId: ResourceId;
    /**
     * A null value and not currently used. Do not include this in your request.
     */
    NextMarker?: NextMarker;
  }
  export interface GetRateBasedRuleManagedKeysResponse {
    /**
     * An array of IP addresses that currently are blocked by the specified RateBasedRule. 
     */
    ManagedKeys?: ManagedKeys;
    /**
     * A null value and not currently used.
     */
    NextMarker?: NextMarker;
  }
  export interface GetRateBasedRuleRequest {
    /**
     * The RuleId of the RateBasedRule that you want to get. RuleId is returned by CreateRateBasedRule and by ListRateBasedRules.
     */
    RuleId: ResourceId;
  }
  export interface GetRateBasedRuleResponse {
    /**
     * Information about the RateBasedRule that you specified in the GetRateBasedRule request.
     */
    Rule?: RateBasedRule;
  }
  export interface GetRegexMatchSetRequest {
    /**
     * The RegexMatchSetId of the RegexMatchSet that you want to get. RegexMatchSetId is returned by CreateRegexMatchSet and by ListRegexMatchSets.
     */
    RegexMatchSetId: ResourceId;
  }
  export interface GetRegexMatchSetResponse {
    /**
     * Information about the RegexMatchSet that you specified in the GetRegexMatchSet request. For more information, see RegexMatchTuple.
     */
    RegexMatchSet?: RegexMatchSet;
  }
  export interface GetRegexPatternSetRequest {
    /**
     * The RegexPatternSetId of the RegexPatternSet that you want to get. RegexPatternSetId is returned by CreateRegexPatternSet and by ListRegexPatternSets.
     */
    RegexPatternSetId: ResourceId;
  }
  export interface GetRegexPatternSetResponse {
    /**
     * Information about the RegexPatternSet that you specified in the GetRegexPatternSet request, including the identifier of the pattern set and the regular expression patterns you want AWS WAF to search for. 
     */
    RegexPatternSet?: RegexPatternSet;
  }
  export interface GetRuleGroupRequest {
    /**
     * The RuleGroupId of the RuleGroup that you want to get. RuleGroupId is returned by CreateRuleGroup and by ListRuleGroups.
     */
    RuleGroupId: ResourceId;
  }
  export interface GetRuleGroupResponse {
    /**
     * Information about the RuleGroup that you specified in the GetRuleGroup request. 
     */
    RuleGroup?: RuleGroup;
  }
  export interface GetRuleRequest {
    /**
     * The RuleId of the Rule that you want to get. RuleId is returned by CreateRule and by ListRules.
     */
    RuleId: ResourceId;
  }
  export interface GetRuleResponse {
    /**
     * Information about the Rule that you specified in the GetRule request. For more information, see the following topics:    Rule: Contains MetricName, Name, an array of Predicate objects, and RuleId     Predicate: Each Predicate object contains DataId, Negated, and Type   
     */
    Rule?: Rule;
  }
  export type GetSampledRequestsMaxItems = number;
  export interface GetSampledRequestsRequest {
    /**
     * The WebACLId of the WebACL for which you want GetSampledRequests to return a sample of requests.
     */
    WebAclId: ResourceId;
    /**
     *  RuleId is one of three values:   The RuleId of the Rule or the RuleGroupId of the RuleGroup for which you want GetSampledRequests to return a sample of requests.    Default_Action, which causes GetSampledRequests to return a sample of the requests that didn't match any of the rules in the specified WebACL.  
     */
    RuleId: ResourceId;
    /**
     * The start date and time and the end date and time of the range for which you want GetSampledRequests to return a sample of requests. Specify the date and time in the following format: "2016-09-27T14:50Z". You can specify any time range in the previous three hours.
     */
    TimeWindow: TimeWindow;
    /**
     * The number of requests that you want AWS WAF to return from among the first 5,000 requests that your AWS resource received during the time range. If your resource received fewer requests than the value of MaxItems, GetSampledRequests returns information about all of them. 
     */
    MaxItems: GetSampledRequestsMaxItems;
  }
  export interface GetSampledRequestsResponse {
    /**
     * A complex type that contains detailed information about each of the requests in the sample.
     */
    SampledRequests?: SampledHTTPRequests;
    /**
     * The total number of requests from which GetSampledRequests got a sample of MaxItems requests. If PopulationSize is less than MaxItems, the sample includes every request that your AWS resource received during the specified time range.
     */
    PopulationSize?: PopulationSize;
    /**
     * Usually, TimeWindow is the time range that you specified in the GetSampledRequests request. However, if your AWS resource received more than 5,000 requests during the time range that you specified in the request, GetSampledRequests returns the time range for the first 5,000 requests.
     */
    TimeWindow?: TimeWindow;
  }
  export interface GetSizeConstraintSetRequest {
    /**
     * The SizeConstraintSetId of the SizeConstraintSet that you want to get. SizeConstraintSetId is returned by CreateSizeConstraintSet and by ListSizeConstraintSets.
     */
    SizeConstraintSetId: ResourceId;
  }
  export interface GetSizeConstraintSetResponse {
    /**
     * Information about the SizeConstraintSet that you specified in the GetSizeConstraintSet request. For more information, see the following topics:    SizeConstraintSet: Contains SizeConstraintSetId, SizeConstraints, and Name     SizeConstraints: Contains an array of SizeConstraint objects. Each SizeConstraint object contains FieldToMatch, TextTransformation, ComparisonOperator, and Size     FieldToMatch: Contains Data and Type   
     */
    SizeConstraintSet?: SizeConstraintSet;
  }
  export interface GetSqlInjectionMatchSetRequest {
    /**
     * The SqlInjectionMatchSetId of the SqlInjectionMatchSet that you want to get. SqlInjectionMatchSetId is returned by CreateSqlInjectionMatchSet and by ListSqlInjectionMatchSets.
     */
    SqlInjectionMatchSetId: ResourceId;
  }
  export interface GetSqlInjectionMatchSetResponse {
    /**
     * Information about the SqlInjectionMatchSet that you specified in the GetSqlInjectionMatchSet request. For more information, see the following topics:    SqlInjectionMatchSet: Contains Name, SqlInjectionMatchSetId, and an array of SqlInjectionMatchTuple objects    SqlInjectionMatchTuple: Each SqlInjectionMatchTuple object contains FieldToMatch and TextTransformation     FieldToMatch: Contains Data and Type   
     */
    SqlInjectionMatchSet?: SqlInjectionMatchSet;
  }
  export interface GetWebACLRequest {
    /**
     * The WebACLId of the WebACL that you want to get. WebACLId is returned by CreateWebACL and by ListWebACLs.
     */
    WebACLId: ResourceId;
  }
  export interface GetWebACLResponse {
    /**
     * Information about the WebACL that you specified in the GetWebACL request. For more information, see the following topics:    WebACL: Contains DefaultAction, MetricName, Name, an array of Rule objects, and WebACLId     DefaultAction (Data type is WafAction): Contains Type     Rules: Contains an array of ActivatedRule objects, which contain Action, Priority, and RuleId     Action: Contains Type   
     */
    WebACL?: WebACL;
  }
  export interface GetXssMatchSetRequest {
    /**
     * The XssMatchSetId of the XssMatchSet that you want to get. XssMatchSetId is returned by CreateXssMatchSet and by ListXssMatchSets.
     */
    XssMatchSetId: ResourceId;
  }
  export interface GetXssMatchSetResponse {
    /**
     * Information about the XssMatchSet that you specified in the GetXssMatchSet request. For more information, see the following topics:    XssMatchSet: Contains Name, XssMatchSetId, and an array of XssMatchTuple objects    XssMatchTuple: Each XssMatchTuple object contains FieldToMatch and TextTransformation     FieldToMatch: Contains Data and Type   
     */
    XssMatchSet?: XssMatchSet;
  }
  export interface HTTPHeader {
    /**
     * The name of one of the headers in the sampled web request.
     */
    Name?: HeaderName;
    /**
     * The value of one of the headers in the sampled web request.
     */
    Value?: HeaderValue;
  }
  export type HTTPHeaders = HTTPHeader[];
  export type HTTPMethod = string;
  export interface HTTPRequest {
    /**
     * The IP address that the request originated from. If the WebACL is associated with a CloudFront distribution, this is the value of one of the following fields in CloudFront access logs:    c-ip, if the viewer did not use an HTTP proxy or a load balancer to send the request    x-forwarded-for, if the viewer did use an HTTP proxy or a load balancer to send the request  
     */
    ClientIP?: IPString;
    /**
     * The two-letter country code for the country that the request originated from. For a current list of country codes, see the Wikipedia entry ISO 3166-1 alpha-2.
     */
    Country?: Country;
    /**
     * The part of a web request that identifies the resource, for example, /images/daily-ad.jpg.
     */
    URI?: URIString;
    /**
     * The HTTP method specified in the sampled web request. CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT. 
     */
    Method?: HTTPMethod;
    /**
     * The HTTP version specified in the sampled web request, for example, HTTP/1.1.
     */
    HTTPVersion?: HTTPVersion;
    /**
     * A complex type that contains two values for each header in the sampled web request: the name of the header and the value of the header.
     */
    Headers?: HTTPHeaders;
  }
  export type HTTPVersion = string;
  export type HeaderName = string;
  export type HeaderValue = string;
  export interface IPSet {
    /**
     * The IPSetId for an IPSet. You use IPSetId to get information about an IPSet (see GetIPSet), update an IPSet (see UpdateIPSet), insert an IPSet into a Rule or delete one from a Rule (see UpdateRule), and delete an IPSet from AWS WAF (see DeleteIPSet).  IPSetId is returned by CreateIPSet and by ListIPSets.
     */
    IPSetId: ResourceId;
    /**
     * A friendly name or description of the IPSet. You can't change the name of an IPSet after you create it.
     */
    Name?: ResourceName;
    /**
     * The IP address type (IPV4 or IPV6) and the IP address range (in CIDR notation) that web requests originate from. If the WebACL is associated with a CloudFront distribution and the viewer did not use an HTTP proxy or a load balancer to send the request, this is the value of the c-ip field in the CloudFront access logs.
     */
    IPSetDescriptors: IPSetDescriptors;
  }
  export interface IPSetDescriptor {
    /**
     * Specify IPV4 or IPV6.
     */
    Type: IPSetDescriptorType;
    /**
     * Specify an IPv4 address by using CIDR notation. For example:   To configure AWS WAF to allow, block, or count requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.   To configure AWS WAF to allow, block, or count requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.   For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing. Specify an IPv6 address by using CIDR notation. For example:   To configure AWS WAF to allow, block, or count requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.   To configure AWS WAF to allow, block, or count requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.  
     */
    Value: IPSetDescriptorValue;
  }
  export type IPSetDescriptorType = "IPV4"|"IPV6"|string;
  export type IPSetDescriptorValue = string;
  export type IPSetDescriptors = IPSetDescriptor[];
  export type IPSetSummaries = IPSetSummary[];
  export interface IPSetSummary {
    /**
     * The IPSetId for an IPSet. You can use IPSetId in a GetIPSet request to get detailed information about an IPSet.
     */
    IPSetId: ResourceId;
    /**
     * A friendly name or description of the IPSet. You can't change the name of an IPSet after you create it.
     */
    Name: ResourceName;
  }
  export interface IPSetUpdate {
    /**
     * Specifies whether to insert or delete an IP address with UpdateIPSet.
     */
    Action: ChangeAction;
    /**
     * The IP address type (IPV4 or IPV6) and the IP address range (in CIDR notation) that web requests originate from.
     */
    IPSetDescriptor: IPSetDescriptor;
  }
  export type IPSetUpdates = IPSetUpdate[];
  export type IPString = string;
  export interface ListActivatedRulesInRuleGroupRequest {
    /**
     * The RuleGroupId of the RuleGroup for which you want to get a list of ActivatedRule objects.
     */
    RuleGroupId?: ResourceId;
    /**
     * If you specify a value for Limit and you have more ActivatedRules than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of ActivatedRules. For the second and subsequent ListActivatedRulesInRuleGroup requests, specify the value of NextMarker from the previous response to get information about another batch of ActivatedRules.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of ActivatedRules that you want AWS WAF to return for this request. If you have more ActivatedRules than the number that you specify for Limit, the response includes a NextMarker value that you can use to get another batch of ActivatedRules.
     */
    Limit?: PaginationLimit;
  }
  export interface ListActivatedRulesInRuleGroupResponse {
    /**
     * If you have more ActivatedRules than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more ActivatedRules, submit another ListActivatedRulesInRuleGroup request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of ActivatedRules objects.
     */
    ActivatedRules?: ActivatedRules;
  }
  export interface ListByteMatchSetsRequest {
    /**
     * If you specify a value for Limit and you have more ByteMatchSets than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of ByteMatchSets. For the second and subsequent ListByteMatchSets requests, specify the value of NextMarker from the previous response to get information about another batch of ByteMatchSets.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of ByteMatchSet objects that you want AWS WAF to return for this request. If you have more ByteMatchSets objects than the number you specify for Limit, the response includes a NextMarker value that you can use to get another batch of ByteMatchSet objects.
     */
    Limit?: PaginationLimit;
  }
  export interface ListByteMatchSetsResponse {
    /**
     * If you have more ByteMatchSet objects than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more ByteMatchSet objects, submit another ListByteMatchSets request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of ByteMatchSetSummary objects.
     */
    ByteMatchSets?: ByteMatchSetSummaries;
  }
  export interface ListGeoMatchSetsRequest {
    /**
     * If you specify a value for Limit and you have more GeoMatchSets than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of GeoMatchSet objects. For the second and subsequent ListGeoMatchSets requests, specify the value of NextMarker from the previous response to get information about another batch of GeoMatchSet objects.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of GeoMatchSet objects that you want AWS WAF to return for this request. If you have more GeoMatchSet objects than the number you specify for Limit, the response includes a NextMarker value that you can use to get another batch of GeoMatchSet objects.
     */
    Limit?: PaginationLimit;
  }
  export interface ListGeoMatchSetsResponse {
    /**
     * If you have more GeoMatchSet objects than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more GeoMatchSet objects, submit another ListGeoMatchSets request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of GeoMatchSetSummary objects.
     */
    GeoMatchSets?: GeoMatchSetSummaries;
  }
  export interface ListIPSetsRequest {
    /**
     * AWS WAF returns a NextMarker value in the response that allows you to list another group of IPSets. For the second and subsequent ListIPSets requests, specify the value of NextMarker from the previous response to get information about another batch of IPSets.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of IPSet objects that you want AWS WAF to return for this request. If you have more IPSet objects than the number you specify for Limit, the response includes a NextMarker value that you can use to get another batch of IPSet objects.
     */
    Limit?: PaginationLimit;
  }
  export interface ListIPSetsResponse {
    /**
     * To list more IPSet objects, submit another ListIPSets request, and in the next request use the NextMarker response value as the NextMarker value.
     */
    NextMarker?: NextMarker;
    /**
     * An array of IPSetSummary objects.
     */
    IPSets?: IPSetSummaries;
  }
  export interface ListLoggingConfigurationsRequest {
    /**
     * If you specify a value for Limit and you have more LoggingConfigurations than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of LoggingConfigurations. For the second and subsequent ListLoggingConfigurations requests, specify the value of NextMarker from the previous response to get information about another batch of ListLoggingConfigurations.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of LoggingConfigurations that you want AWS WAF to return for this request. If you have more LoggingConfigurations than the number that you specify for Limit, the response includes a NextMarker value that you can use to get another batch of LoggingConfigurations.
     */
    Limit?: PaginationLimit;
  }
  export interface ListLoggingConfigurationsResponse {
    /**
     * An array of LoggingConfiguration objects.
     */
    LoggingConfigurations?: LoggingConfigurations;
    /**
     * If you have more LoggingConfigurations than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more LoggingConfigurations, submit another ListLoggingConfigurations request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
  }
  export interface ListRateBasedRulesRequest {
    /**
     * If you specify a value for Limit and you have more Rules than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of Rules. For the second and subsequent ListRateBasedRules requests, specify the value of NextMarker from the previous response to get information about another batch of Rules.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of Rules that you want AWS WAF to return for this request. If you have more Rules than the number that you specify for Limit, the response includes a NextMarker value that you can use to get another batch of Rules.
     */
    Limit?: PaginationLimit;
  }
  export interface ListRateBasedRulesResponse {
    /**
     * If you have more Rules than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more Rules, submit another ListRateBasedRules request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of RuleSummary objects.
     */
    Rules?: RuleSummaries;
  }
  export interface ListRegexMatchSetsRequest {
    /**
     * If you specify a value for Limit and you have more RegexMatchSet objects than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of ByteMatchSets. For the second and subsequent ListRegexMatchSets requests, specify the value of NextMarker from the previous response to get information about another batch of RegexMatchSet objects.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of RegexMatchSet objects that you want AWS WAF to return for this request. If you have more RegexMatchSet objects than the number you specify for Limit, the response includes a NextMarker value that you can use to get another batch of RegexMatchSet objects.
     */
    Limit?: PaginationLimit;
  }
  export interface ListRegexMatchSetsResponse {
    /**
     * If you have more RegexMatchSet objects than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more RegexMatchSet objects, submit another ListRegexMatchSets request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of RegexMatchSetSummary objects.
     */
    RegexMatchSets?: RegexMatchSetSummaries;
  }
  export interface ListRegexPatternSetsRequest {
    /**
     * If you specify a value for Limit and you have more RegexPatternSet objects than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of RegexPatternSet objects. For the second and subsequent ListRegexPatternSets requests, specify the value of NextMarker from the previous response to get information about another batch of RegexPatternSet objects.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of RegexPatternSet objects that you want AWS WAF to return for this request. If you have more RegexPatternSet objects than the number you specify for Limit, the response includes a NextMarker value that you can use to get another batch of RegexPatternSet objects.
     */
    Limit?: PaginationLimit;
  }
  export interface ListRegexPatternSetsResponse {
    /**
     * If you have more RegexPatternSet objects than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more RegexPatternSet objects, submit another ListRegexPatternSets request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of RegexPatternSetSummary objects.
     */
    RegexPatternSets?: RegexPatternSetSummaries;
  }
  export interface ListRuleGroupsRequest {
    /**
     * If you specify a value for Limit and you have more RuleGroups than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of RuleGroups. For the second and subsequent ListRuleGroups requests, specify the value of NextMarker from the previous response to get information about another batch of RuleGroups.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of RuleGroups that you want AWS WAF to return for this request. If you have more RuleGroups than the number that you specify for Limit, the response includes a NextMarker value that you can use to get another batch of RuleGroups.
     */
    Limit?: PaginationLimit;
  }
  export interface ListRuleGroupsResponse {
    /**
     * If you have more RuleGroups than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more RuleGroups, submit another ListRuleGroups request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of RuleGroup objects.
     */
    RuleGroups?: RuleGroupSummaries;
  }
  export interface ListRulesRequest {
    /**
     * If you specify a value for Limit and you have more Rules than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of Rules. For the second and subsequent ListRules requests, specify the value of NextMarker from the previous response to get information about another batch of Rules.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of Rules that you want AWS WAF to return for this request. If you have more Rules than the number that you specify for Limit, the response includes a NextMarker value that you can use to get another batch of Rules.
     */
    Limit?: PaginationLimit;
  }
  export interface ListRulesResponse {
    /**
     * If you have more Rules than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more Rules, submit another ListRules request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of RuleSummary objects.
     */
    Rules?: RuleSummaries;
  }
  export interface ListSizeConstraintSetsRequest {
    /**
     * If you specify a value for Limit and you have more SizeConstraintSets than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of SizeConstraintSets. For the second and subsequent ListSizeConstraintSets requests, specify the value of NextMarker from the previous response to get information about another batch of SizeConstraintSets.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of SizeConstraintSet objects that you want AWS WAF to return for this request. If you have more SizeConstraintSets objects than the number you specify for Limit, the response includes a NextMarker value that you can use to get another batch of SizeConstraintSet objects.
     */
    Limit?: PaginationLimit;
  }
  export interface ListSizeConstraintSetsResponse {
    /**
     * If you have more SizeConstraintSet objects than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more SizeConstraintSet objects, submit another ListSizeConstraintSets request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of SizeConstraintSetSummary objects.
     */
    SizeConstraintSets?: SizeConstraintSetSummaries;
  }
  export interface ListSqlInjectionMatchSetsRequest {
    /**
     * If you specify a value for Limit and you have more SqlInjectionMatchSet objects than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of SqlInjectionMatchSets. For the second and subsequent ListSqlInjectionMatchSets requests, specify the value of NextMarker from the previous response to get information about another batch of SqlInjectionMatchSets.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of SqlInjectionMatchSet objects that you want AWS WAF to return for this request. If you have more SqlInjectionMatchSet objects than the number you specify for Limit, the response includes a NextMarker value that you can use to get another batch of Rules.
     */
    Limit?: PaginationLimit;
  }
  export interface ListSqlInjectionMatchSetsResponse {
    /**
     * If you have more SqlInjectionMatchSet objects than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more SqlInjectionMatchSet objects, submit another ListSqlInjectionMatchSets request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of SqlInjectionMatchSetSummary objects.
     */
    SqlInjectionMatchSets?: SqlInjectionMatchSetSummaries;
  }
  export interface ListSubscribedRuleGroupsRequest {
    /**
     * If you specify a value for Limit and you have more ByteMatchSetssubscribed rule groups than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of subscribed rule groups. For the second and subsequent ListSubscribedRuleGroupsRequest requests, specify the value of NextMarker from the previous response to get information about another batch of subscribed rule groups.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of subscribed rule groups that you want AWS WAF to return for this request. If you have more objects than the number you specify for Limit, the response includes a NextMarker value that you can use to get another batch of objects.
     */
    Limit?: PaginationLimit;
  }
  export interface ListSubscribedRuleGroupsResponse {
    /**
     * If you have more objects than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more objects, submit another ListSubscribedRuleGroups request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of RuleGroup objects.
     */
    RuleGroups?: SubscribedRuleGroupSummaries;
  }
  export interface ListTagsForResourceRequest {
    NextMarker?: NextMarker;
    Limit?: PaginationLimit;
    ResourceARN: ResourceArn;
  }
  export interface ListTagsForResourceResponse {
    NextMarker?: NextMarker;
    TagInfoForResource?: TagInfoForResource;
  }
  export interface ListWebACLsRequest {
    /**
     * If you specify a value for Limit and you have more WebACL objects than the number that you specify for Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of WebACL objects. For the second and subsequent ListWebACLs requests, specify the value of NextMarker from the previous response to get information about another batch of WebACL objects.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of WebACL objects that you want AWS WAF to return for this request. If you have more WebACL objects than the number that you specify for Limit, the response includes a NextMarker value that you can use to get another batch of WebACL objects.
     */
    Limit?: PaginationLimit;
  }
  export interface ListWebACLsResponse {
    /**
     * If you have more WebACL objects than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more WebACL objects, submit another ListWebACLs request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of WebACLSummary objects.
     */
    WebACLs?: WebACLSummaries;
  }
  export interface ListXssMatchSetsRequest {
    /**
     * If you specify a value for Limit and you have more XssMatchSet objects than the value of Limit, AWS WAF returns a NextMarker value in the response that allows you to list another group of XssMatchSets. For the second and subsequent ListXssMatchSets requests, specify the value of NextMarker from the previous response to get information about another batch of XssMatchSets.
     */
    NextMarker?: NextMarker;
    /**
     * Specifies the number of XssMatchSet objects that you want AWS WAF to return for this request. If you have more XssMatchSet objects than the number you specify for Limit, the response includes a NextMarker value that you can use to get another batch of Rules.
     */
    Limit?: PaginationLimit;
  }
  export interface ListXssMatchSetsResponse {
    /**
     * If you have more XssMatchSet objects than the number that you specified for Limit in the request, the response includes a NextMarker value. To list more XssMatchSet objects, submit another ListXssMatchSets request, and specify the NextMarker value from the response in the NextMarker value in the next request.
     */
    NextMarker?: NextMarker;
    /**
     * An array of XssMatchSetSummary objects.
     */
    XssMatchSets?: XssMatchSetSummaries;
  }
  export type LogDestinationConfigs = ResourceArn[];
  export interface LoggingConfiguration {
    /**
     * The Amazon Resource Name (ARN) of the web ACL that you want to associate with LogDestinationConfigs.
     */
    ResourceArn: ResourceArn;
    /**
     * An array of Amazon Kinesis Data Firehose ARNs.
     */
    LogDestinationConfigs: LogDestinationConfigs;
    /**
     * The parts of the request that you want redacted from the logs. For example, if you redact the cookie field, the cookie field in the firehose will be xxx. 
     */
    RedactedFields?: RedactedFields;
  }
  export type LoggingConfigurations = LoggingConfiguration[];
  export type ManagedKey = string;
  export type ManagedKeys = ManagedKey[];
  export type MatchFieldData = string;
  export type MatchFieldType = "URI"|"QUERY_STRING"|"HEADER"|"METHOD"|"BODY"|"SINGLE_QUERY_ARG"|"ALL_QUERY_ARGS"|string;
  export type MetricName = string;
  export type Negated = boolean;
  export type NextMarker = string;
  export type PaginationLimit = number;
  export type PolicyString = string;
  export type PopulationSize = number;
  export type PositionalConstraint = "EXACTLY"|"STARTS_WITH"|"ENDS_WITH"|"CONTAINS"|"CONTAINS_WORD"|string;
  export interface Predicate {
    /**
     * Set Negated to False if you want AWS WAF to allow, block, or count requests based on the settings in the specified ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, or SizeConstraintSet. For example, if an IPSet includes the IP address 192.0.2.44, AWS WAF will allow or block requests based on that IP address. Set Negated to True if you want AWS WAF to allow or block a request based on the negation of the settings in the ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, or SizeConstraintSet. For example, if an IPSet includes the IP address 192.0.2.44, AWS WAF will allow, block, or count requests based on all IP addresses except 192.0.2.44.
     */
    Negated: Negated;
    /**
     * The type of predicate in a Rule, such as ByteMatch or IPSet.
     */
    Type: PredicateType;
    /**
     * A unique identifier for a predicate in a Rule, such as ByteMatchSetId or IPSetId. The ID is returned by the corresponding Create or List command.
     */
    DataId: ResourceId;
  }
  export type PredicateType = "IPMatch"|"ByteMatch"|"SqlInjectionMatch"|"GeoMatch"|"SizeConstraint"|"XssMatch"|"RegexMatch"|string;
  export type Predicates = Predicate[];
  export interface PutLoggingConfigurationRequest {
    /**
     * The Amazon Kinesis Data Firehose that contains the inspected traffic information, the redacted fields details, and the Amazon Resource Name (ARN) of the web ACL to monitor.  When specifying Type in RedactedFields, you must use one of the following values: URI, QUERY_STRING, HEADER, or METHOD. 
     */
    LoggingConfiguration: LoggingConfiguration;
  }
  export interface PutLoggingConfigurationResponse {
    /**
     * The LoggingConfiguration that you submitted in the request.
     */
    LoggingConfiguration?: LoggingConfiguration;
  }
  export interface PutPermissionPolicyRequest {
    /**
     * The Amazon Resource Name (ARN) of the RuleGroup to which you want to attach the policy.
     */
    ResourceArn: ResourceArn;
    /**
     * The policy to attach to the specified RuleGroup.
     */
    Policy: PolicyString;
  }
  export interface PutPermissionPolicyResponse {
  }
  export interface RateBasedRule {
    /**
     * A unique identifier for a RateBasedRule. You use RuleId to get more information about a RateBasedRule (see GetRateBasedRule), update a RateBasedRule (see UpdateRateBasedRule), insert a RateBasedRule into a WebACL or delete one from a WebACL (see UpdateWebACL), or delete a RateBasedRule from AWS WAF (see DeleteRateBasedRule).
     */
    RuleId: ResourceId;
    /**
     * A friendly name or description for a RateBasedRule. You can't change the name of a RateBasedRule after you create it.
     */
    Name?: ResourceName;
    /**
     * A friendly name or description for the metrics for a RateBasedRule. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change the name of the metric after you create the RateBasedRule.
     */
    MetricName?: MetricName;
    /**
     * The Predicates object contains one Predicate element for each ByteMatchSet, IPSet, or SqlInjectionMatchSet object that you want to include in a RateBasedRule.
     */
    MatchPredicates: Predicates;
    /**
     * The field that AWS WAF uses to determine if requests are likely arriving from single source and thus subject to rate monitoring. The only valid value for RateKey is IP. IP indicates that requests arriving from the same IP address are subject to the RateLimit that is specified in the RateBasedRule.
     */
    RateKey: RateKey;
    /**
     * The maximum number of requests, which have an identical value in the field specified by the RateKey, allowed in a five-minute period. If the number of requests exceeds the RateLimit and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.
     */
    RateLimit: RateLimit;
  }
  export type RateKey = "IP"|string;
  export type RateLimit = number;
  export type RedactedFields = FieldToMatch[];
  export interface RegexMatchSet {
    /**
     * The RegexMatchSetId for a RegexMatchSet. You use RegexMatchSetId to get information about a RegexMatchSet (see GetRegexMatchSet), update a RegexMatchSet (see UpdateRegexMatchSet), insert a RegexMatchSet into a Rule or delete one from a Rule (see UpdateRule), and delete a RegexMatchSet from AWS WAF (see DeleteRegexMatchSet).  RegexMatchSetId is returned by CreateRegexMatchSet and by ListRegexMatchSets.
     */
    RegexMatchSetId?: ResourceId;
    /**
     * A friendly name or description of the RegexMatchSet. You can't change Name after you create a RegexMatchSet.
     */
    Name?: ResourceName;
    /**
     * Contains an array of RegexMatchTuple objects. Each RegexMatchTuple object contains:    The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the User-Agent header.    The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see RegexPatternSet.   Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.  
     */
    RegexMatchTuples?: RegexMatchTuples;
  }
  export type RegexMatchSetSummaries = RegexMatchSetSummary[];
  export interface RegexMatchSetSummary {
    /**
     * The RegexMatchSetId for a RegexMatchSet. You use RegexMatchSetId to get information about a RegexMatchSet, update a RegexMatchSet, remove a RegexMatchSet from a Rule, and delete a RegexMatchSet from AWS WAF.  RegexMatchSetId is returned by CreateRegexMatchSet and by ListRegexMatchSets.
     */
    RegexMatchSetId: ResourceId;
    /**
     * A friendly name or description of the RegexMatchSet. You can't change Name after you create a RegexMatchSet.
     */
    Name: ResourceName;
  }
  export interface RegexMatchSetUpdate {
    /**
     * Specifies whether to insert or delete a RegexMatchTuple.
     */
    Action: ChangeAction;
    /**
     * Information about the part of a web request that you want AWS WAF to inspect and the identifier of the regular expression (regex) pattern that you want AWS WAF to search for. If you specify DELETE for the value of Action, the RegexMatchTuple values must exactly match the values in the RegexMatchTuple that you want to delete from the RegexMatchSet.
     */
    RegexMatchTuple: RegexMatchTuple;
  }
  export type RegexMatchSetUpdates = RegexMatchSetUpdate[];
  export interface RegexMatchTuple {
    /**
     * Specifies where in a web request to look for the RegexPatternSet.
     */
    FieldToMatch: FieldToMatch;
    /**
     * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on RegexPatternSet before inspecting a request for a match. You can only specify a single type of TextTransformation.  CMD_LINE  When you're concerned that attackers are injecting an operating system commandline command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations:   Delete the following characters: \ " ' ^   Delete spaces before the following characters: / (   Replace the following characters with a space: , ;   Replace multiple spaces with one space   Convert uppercase letters (A-Z) to lowercase (a-z)    COMPRESS_WHITE_SPACE  Use this option to replace the following characters with a space character (decimal 32):   \f, formfeed, decimal 12   \t, tab, decimal 9   \n, newline, decimal 10   \r, carriage return, decimal 13   \v, vertical tab, decimal 11   non-breaking space, decimal 160    COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.  HTML_ENTITY_DECODE  Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations:   Replaces (ampersand)quot; with "    Replaces (ampersand)nbsp; with a non-breaking space, decimal 160   Replaces (ampersand)lt; with a "less than" symbol   Replaces (ampersand)gt; with &gt;    Replaces characters that are represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding characters   Replaces characters that are represented in decimal format, (ampersand)#nnnn;, with the corresponding characters    LOWERCASE  Use this option to convert uppercase letters (A-Z) to lowercase (a-z).  URL_DECODE  Use this option to decode a URL-encoded value.  NONE  Specify NONE if you don't want to perform any text transformations.
     */
    TextTransformation: TextTransformation;
    /**
     * The RegexPatternSetId for a RegexPatternSet. You use RegexPatternSetId to get information about a RegexPatternSet (see GetRegexPatternSet), update a RegexPatternSet (see UpdateRegexPatternSet), insert a RegexPatternSet into a RegexMatchSet or delete one from a RegexMatchSet (see UpdateRegexMatchSet), and delete an RegexPatternSet from AWS WAF (see DeleteRegexPatternSet).  RegexPatternSetId is returned by CreateRegexPatternSet and by ListRegexPatternSets.
     */
    RegexPatternSetId: ResourceId;
  }
  export type RegexMatchTuples = RegexMatchTuple[];
  export interface RegexPatternSet {
    /**
     * The identifier for the RegexPatternSet. You use RegexPatternSetId to get information about a RegexPatternSet, update a RegexPatternSet, remove a RegexPatternSet from a RegexMatchSet, and delete a RegexPatternSet from AWS WAF.  RegexMatchSetId is returned by CreateRegexPatternSet and by ListRegexPatternSets.
     */
    RegexPatternSetId: ResourceId;
    /**
     * A friendly name or description of the RegexPatternSet. You can't change Name after you create a RegexPatternSet.
     */
    Name?: ResourceName;
    /**
     * Specifies the regular expression (regex) patterns that you want AWS WAF to search for, such as B[a@]dB[o0]t.
     */
    RegexPatternStrings: RegexPatternStrings;
  }
  export type RegexPatternSetSummaries = RegexPatternSetSummary[];
  export interface RegexPatternSetSummary {
    /**
     * The RegexPatternSetId for a RegexPatternSet. You use RegexPatternSetId to get information about a RegexPatternSet, update a RegexPatternSet, remove a RegexPatternSet from a RegexMatchSet, and delete a RegexPatternSet from AWS WAF.  RegexPatternSetId is returned by CreateRegexPatternSet and by ListRegexPatternSets.
     */
    RegexPatternSetId: ResourceId;
    /**
     * A friendly name or description of the RegexPatternSet. You can't change Name after you create a RegexPatternSet.
     */
    Name: ResourceName;
  }
  export interface RegexPatternSetUpdate {
    /**
     * Specifies whether to insert or delete a RegexPatternString.
     */
    Action: ChangeAction;
    /**
     * Specifies the regular expression (regex) pattern that you want AWS WAF to search for, such as B[a@]dB[o0]t.
     */
    RegexPatternString: RegexPatternString;
  }
  export type RegexPatternSetUpdates = RegexPatternSetUpdate[];
  export type RegexPatternString = string;
  export type RegexPatternStrings = RegexPatternString[];
  export type ResourceArn = string;
  export type ResourceId = string;
  export type ResourceName = string;
  export interface Rule {
    /**
     * A unique identifier for a Rule. You use RuleId to get more information about a Rule (see GetRule), update a Rule (see UpdateRule), insert a Rule into a WebACL or delete a one from a WebACL (see UpdateWebACL), or delete a Rule from AWS WAF (see DeleteRule).  RuleId is returned by CreateRule and by ListRules.
     */
    RuleId: ResourceId;
    /**
     * The friendly name or description for the Rule. You can't change the name of a Rule after you create it.
     */
    Name?: ResourceName;
    /**
     * A friendly name or description for the metrics for this Rule. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change MetricName after you create the Rule.
     */
    MetricName?: MetricName;
    /**
     * The Predicates object contains one Predicate element for each ByteMatchSet, IPSet, or SqlInjectionMatchSet object that you want to include in a Rule.
     */
    Predicates: Predicates;
  }
  export interface RuleGroup {
    /**
     * A unique identifier for a RuleGroup. You use RuleGroupId to get more information about a RuleGroup (see GetRuleGroup), update a RuleGroup (see UpdateRuleGroup), insert a RuleGroup into a WebACL or delete a one from a WebACL (see UpdateWebACL), or delete a RuleGroup from AWS WAF (see DeleteRuleGroup).  RuleGroupId is returned by CreateRuleGroup and by ListRuleGroups.
     */
    RuleGroupId: ResourceId;
    /**
     * The friendly name or description for the RuleGroup. You can't change the name of a RuleGroup after you create it.
     */
    Name?: ResourceName;
    /**
     * A friendly name or description for the metrics for this RuleGroup. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change the name of the metric after you create the RuleGroup.
     */
    MetricName?: MetricName;
  }
  export type RuleGroupSummaries = RuleGroupSummary[];
  export interface RuleGroupSummary {
    /**
     * A unique identifier for a RuleGroup. You use RuleGroupId to get more information about a RuleGroup (see GetRuleGroup), update a RuleGroup (see UpdateRuleGroup), insert a RuleGroup into a WebACL or delete one from a WebACL (see UpdateWebACL), or delete a RuleGroup from AWS WAF (see DeleteRuleGroup).  RuleGroupId is returned by CreateRuleGroup and by ListRuleGroups.
     */
    RuleGroupId: ResourceId;
    /**
     * A friendly name or description of the RuleGroup. You can't change the name of a RuleGroup after you create it.
     */
    Name: ResourceName;
  }
  export interface RuleGroupUpdate {
    /**
     * Specify INSERT to add an ActivatedRule to a RuleGroup. Use DELETE to remove an ActivatedRule from a RuleGroup.
     */
    Action: ChangeAction;
    /**
     * The ActivatedRule object specifies a Rule that you want to insert or delete, the priority of the Rule in the WebACL, and the action that you want AWS WAF to take when a web request matches the Rule (ALLOW, BLOCK, or COUNT).
     */
    ActivatedRule: ActivatedRule;
  }
  export type RuleGroupUpdates = RuleGroupUpdate[];
  export type RulePriority = number;
  export type RuleSummaries = RuleSummary[];
  export interface RuleSummary {
    /**
     * A unique identifier for a Rule. You use RuleId to get more information about a Rule (see GetRule), update a Rule (see UpdateRule), insert a Rule into a WebACL or delete one from a WebACL (see UpdateWebACL), or delete a Rule from AWS WAF (see DeleteRule).  RuleId is returned by CreateRule and by ListRules.
     */
    RuleId: ResourceId;
    /**
     * A friendly name or description of the Rule. You can't change the name of a Rule after you create it.
     */
    Name: ResourceName;
  }
  export interface RuleUpdate {
    /**
     * Specify INSERT to add a Predicate to a Rule. Use DELETE to remove a Predicate from a Rule.
     */
    Action: ChangeAction;
    /**
     * The ID of the Predicate (such as an IPSet) that you want to add to a Rule.
     */
    Predicate: Predicate;
  }
  export type RuleUpdates = RuleUpdate[];
  export type SampleWeight = number;
  export interface SampledHTTPRequest {
    /**
     * A complex type that contains detailed information about the request.
     */
    Request: HTTPRequest;
    /**
     * A value that indicates how one result in the response relates proportionally to other results in the response. A result that has a weight of 2 represents roughly twice as many CloudFront web requests as a result that has a weight of 1.
     */
    Weight: SampleWeight;
    /**
     * The time at which AWS WAF received the request from your AWS resource, in Unix time format (in seconds).
     */
    Timestamp?: Timestamp;
    /**
     * The action for the Rule that the request matched: ALLOW, BLOCK, or COUNT.
     */
    Action?: Action;
    /**
     * This value is returned if the GetSampledRequests request specifies the ID of a RuleGroup rather than the ID of an individual rule. RuleWithinRuleGroup is the rule within the specified RuleGroup that matched the request listed in the response.
     */
    RuleWithinRuleGroup?: ResourceId;
  }
  export type SampledHTTPRequests = SampledHTTPRequest[];
  export type Size = number;
  export interface SizeConstraint {
    /**
     * Specifies where in a web request to look for the size constraint.
     */
    FieldToMatch: FieldToMatch;
    /**
     * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting a request for a match. You can only specify a single type of TextTransformation. Note that if you choose BODY for the value of Type, you must choose NONE for TextTransformation because CloudFront forwards only the first 8192 bytes for inspection.   NONE  Specify NONE if you don't want to perform any text transformations.  CMD_LINE  When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations:   Delete the following characters: \ " ' ^   Delete spaces before the following characters: / (   Replace the following characters with a space: , ;   Replace multiple spaces with one space   Convert uppercase letters (A-Z) to lowercase (a-z)    COMPRESS_WHITE_SPACE  Use this option to replace the following characters with a space character (decimal 32):   \f, formfeed, decimal 12   \t, tab, decimal 9   \n, newline, decimal 10   \r, carriage return, decimal 13   \v, vertical tab, decimal 11   non-breaking space, decimal 160    COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.  HTML_ENTITY_DECODE  Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations:   Replaces (ampersand)quot; with "    Replaces (ampersand)nbsp; with a non-breaking space, decimal 160   Replaces (ampersand)lt; with a "less than" symbol   Replaces (ampersand)gt; with &gt;    Replaces characters that are represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding characters   Replaces characters that are represented in decimal format, (ampersand)#nnnn;, with the corresponding characters    LOWERCASE  Use this option to convert uppercase letters (A-Z) to lowercase (a-z).  URL_DECODE  Use this option to decode a URL-encoded value.
     */
    TextTransformation: TextTransformation;
    /**
     * The type of comparison you want AWS WAF to perform. AWS WAF uses this in combination with the provided Size and FieldToMatch to build an expression in the form of "Size ComparisonOperator size in bytes of FieldToMatch". If that expression is true, the SizeConstraint is considered to match.  EQ: Used to test if the Size is equal to the size of the FieldToMatch   NE: Used to test if the Size is not equal to the size of the FieldToMatch   LE: Used to test if the Size is less than or equal to the size of the FieldToMatch   LT: Used to test if the Size is strictly less than the size of the FieldToMatch   GE: Used to test if the Size is greater than or equal to the size of the FieldToMatch   GT: Used to test if the Size is strictly greater than the size of the FieldToMatch 
     */
    ComparisonOperator: ComparisonOperator;
    /**
     * The size in bytes that you want AWS WAF to compare against the size of the specified FieldToMatch. AWS WAF uses this in combination with ComparisonOperator and FieldToMatch to build an expression in the form of "Size ComparisonOperator size in bytes of FieldToMatch". If that expression is true, the SizeConstraint is considered to match. Valid values for size are 0 - 21474836480 bytes (0 - 20 GB). If you specify URI for the value of Type, the / in the URI counts as one character. For example, the URI /logo.jpg is nine characters long.
     */
    Size: Size;
  }
  export interface SizeConstraintSet {
    /**
     * A unique identifier for a SizeConstraintSet. You use SizeConstraintSetId to get information about a SizeConstraintSet (see GetSizeConstraintSet), update a SizeConstraintSet (see UpdateSizeConstraintSet), insert a SizeConstraintSet into a Rule or delete one from a Rule (see UpdateRule), and delete a SizeConstraintSet from AWS WAF (see DeleteSizeConstraintSet).  SizeConstraintSetId is returned by CreateSizeConstraintSet and by ListSizeConstraintSets.
     */
    SizeConstraintSetId: ResourceId;
    /**
     * The name, if any, of the SizeConstraintSet.
     */
    Name?: ResourceName;
    /**
     * Specifies the parts of web requests that you want to inspect the size of.
     */
    SizeConstraints: SizeConstraints;
  }
  export type SizeConstraintSetSummaries = SizeConstraintSetSummary[];
  export interface SizeConstraintSetSummary {
    /**
     * A unique identifier for a SizeConstraintSet. You use SizeConstraintSetId to get information about a SizeConstraintSet (see GetSizeConstraintSet), update a SizeConstraintSet (see UpdateSizeConstraintSet), insert a SizeConstraintSet into a Rule or delete one from a Rule (see UpdateRule), and delete a SizeConstraintSet from AWS WAF (see DeleteSizeConstraintSet).  SizeConstraintSetId is returned by CreateSizeConstraintSet and by ListSizeConstraintSets.
     */
    SizeConstraintSetId: ResourceId;
    /**
     * The name of the SizeConstraintSet, if any.
     */
    Name: ResourceName;
  }
  export interface SizeConstraintSetUpdate {
    /**
     * Specify INSERT to add a SizeConstraintSetUpdate to a SizeConstraintSet. Use DELETE to remove a SizeConstraintSetUpdate from a SizeConstraintSet.
     */
    Action: ChangeAction;
    /**
     * Specifies a constraint on the size of a part of the web request. AWS WAF uses the Size, ComparisonOperator, and FieldToMatch to build an expression in the form of "Size ComparisonOperator size in bytes of FieldToMatch". If that expression is true, the SizeConstraint is considered to match.
     */
    SizeConstraint: SizeConstraint;
  }
  export type SizeConstraintSetUpdates = SizeConstraintSetUpdate[];
  export type SizeConstraints = SizeConstraint[];
  export interface SqlInjectionMatchSet {
    /**
     * A unique identifier for a SqlInjectionMatchSet. You use SqlInjectionMatchSetId to get information about a SqlInjectionMatchSet (see GetSqlInjectionMatchSet), update a SqlInjectionMatchSet (see UpdateSqlInjectionMatchSet), insert a SqlInjectionMatchSet into a Rule or delete one from a Rule (see UpdateRule), and delete a SqlInjectionMatchSet from AWS WAF (see DeleteSqlInjectionMatchSet).  SqlInjectionMatchSetId is returned by CreateSqlInjectionMatchSet and by ListSqlInjectionMatchSets.
     */
    SqlInjectionMatchSetId: ResourceId;
    /**
     * The name, if any, of the SqlInjectionMatchSet.
     */
    Name?: ResourceName;
    /**
     * Specifies the parts of web requests that you want to inspect for snippets of malicious SQL code.
     */
    SqlInjectionMatchTuples: SqlInjectionMatchTuples;
  }
  export type SqlInjectionMatchSetSummaries = SqlInjectionMatchSetSummary[];
  export interface SqlInjectionMatchSetSummary {
    /**
     * A unique identifier for a SqlInjectionMatchSet. You use SqlInjectionMatchSetId to get information about a SqlInjectionMatchSet (see GetSqlInjectionMatchSet), update a SqlInjectionMatchSet (see UpdateSqlInjectionMatchSet), insert a SqlInjectionMatchSet into a Rule or delete one from a Rule (see UpdateRule), and delete a SqlInjectionMatchSet from AWS WAF (see DeleteSqlInjectionMatchSet).  SqlInjectionMatchSetId is returned by CreateSqlInjectionMatchSet and by ListSqlInjectionMatchSets.
     */
    SqlInjectionMatchSetId: ResourceId;
    /**
     * The name of the SqlInjectionMatchSet, if any, specified by Id.
     */
    Name: ResourceName;
  }
  export interface SqlInjectionMatchSetUpdate {
    /**
     * Specify INSERT to add a SqlInjectionMatchSetUpdate to a SqlInjectionMatchSet. Use DELETE to remove a SqlInjectionMatchSetUpdate from a SqlInjectionMatchSet.
     */
    Action: ChangeAction;
    /**
     * Specifies the part of a web request that you want AWS WAF to inspect for snippets of malicious SQL code and, if you want AWS WAF to inspect a header, the name of the header.
     */
    SqlInjectionMatchTuple: SqlInjectionMatchTuple;
  }
  export type SqlInjectionMatchSetUpdates = SqlInjectionMatchSetUpdate[];
  export interface SqlInjectionMatchTuple {
    /**
     * Specifies where in a web request to look for snippets of malicious SQL code.
     */
    FieldToMatch: FieldToMatch;
    /**
     * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting a request for a match. You can only specify a single type of TextTransformation.  CMD_LINE  When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations:   Delete the following characters: \ " ' ^   Delete spaces before the following characters: / (   Replace the following characters with a space: , ;   Replace multiple spaces with one space   Convert uppercase letters (A-Z) to lowercase (a-z)    COMPRESS_WHITE_SPACE  Use this option to replace the following characters with a space character (decimal 32):   \f, formfeed, decimal 12   \t, tab, decimal 9   \n, newline, decimal 10   \r, carriage return, decimal 13   \v, vertical tab, decimal 11   non-breaking space, decimal 160    COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.  HTML_ENTITY_DECODE  Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations:   Replaces (ampersand)quot; with "    Replaces (ampersand)nbsp; with a non-breaking space, decimal 160   Replaces (ampersand)lt; with a "less than" symbol   Replaces (ampersand)gt; with &gt;    Replaces characters that are represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding characters   Replaces characters that are represented in decimal format, (ampersand)#nnnn;, with the corresponding characters    LOWERCASE  Use this option to convert uppercase letters (A-Z) to lowercase (a-z).  URL_DECODE  Use this option to decode a URL-encoded value.  NONE  Specify NONE if you don't want to perform any text transformations.
     */
    TextTransformation: TextTransformation;
  }
  export type SqlInjectionMatchTuples = SqlInjectionMatchTuple[];
  export type SubscribedRuleGroupSummaries = SubscribedRuleGroupSummary[];
  export interface SubscribedRuleGroupSummary {
    /**
     * A unique identifier for a RuleGroup.
     */
    RuleGroupId: ResourceId;
    /**
     * A friendly name or description of the RuleGroup. You can't change the name of a RuleGroup after you create it.
     */
    Name: ResourceName;
    /**
     * A friendly name or description for the metrics for this RuleGroup. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change the name of the metric after you create the RuleGroup.
     */
    MetricName: MetricName;
  }
  export interface Tag {
    Key?: TagKey;
    Value?: TagValue;
  }
  export interface TagInfoForResource {
    ResourceARN?: ResourceArn;
    TagList?: TagList;
  }
  export type TagKey = string;
  export type TagKeyList = TagKey[];
  export type TagList = Tag[];
  export interface TagResourceRequest {
    ResourceARN: ResourceArn;
    Tags: TagList;
  }
  export interface TagResourceResponse {
  }
  export type TagValue = string;
  export type TextTransformation = "NONE"|"COMPRESS_WHITE_SPACE"|"HTML_ENTITY_DECODE"|"LOWERCASE"|"CMD_LINE"|"URL_DECODE"|string;
  export interface TimeWindow {
    /**
     * The beginning of the time range from which you want GetSampledRequests to return a sample of the requests that your AWS resource received. Specify the date and time in the following format: "2016-09-27T14:50Z". You can specify any time range in the previous three hours.
     */
    StartTime: Timestamp;
    /**
     * The end of the time range from which you want GetSampledRequests to return a sample of the requests that your AWS resource received. Specify the date and time in the following format: "2016-09-27T14:50Z". You can specify any time range in the previous three hours.
     */
    EndTime: Timestamp;
  }
  export type Timestamp = Date;
  export type URIString = string;
  export interface UntagResourceRequest {
    ResourceARN: ResourceArn;
    TagKeys: TagKeyList;
  }
  export interface UntagResourceResponse {
  }
  export interface UpdateByteMatchSetRequest {
    /**
     * The ByteMatchSetId of the ByteMatchSet that you want to update. ByteMatchSetId is returned by CreateByteMatchSet and by ListByteMatchSets.
     */
    ByteMatchSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    /**
     * An array of ByteMatchSetUpdate objects that you want to insert into or delete from a ByteMatchSet. For more information, see the applicable data types:    ByteMatchSetUpdate: Contains Action and ByteMatchTuple     ByteMatchTuple: Contains FieldToMatch, PositionalConstraint, TargetString, and TextTransformation     FieldToMatch: Contains Data and Type   
     */
    Updates: ByteMatchSetUpdates;
  }
  export interface UpdateByteMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the UpdateByteMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateGeoMatchSetRequest {
    /**
     * The GeoMatchSetId of the GeoMatchSet that you want to update. GeoMatchSetId is returned by CreateGeoMatchSet and by ListGeoMatchSets.
     */
    GeoMatchSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    /**
     * An array of GeoMatchSetUpdate objects that you want to insert into or delete from an GeoMatchSet. For more information, see the applicable data types:    GeoMatchSetUpdate: Contains Action and GeoMatchConstraint     GeoMatchConstraint: Contains Type and Value  You can have only one Type and Value per GeoMatchConstraint. To add multiple countries, include multiple GeoMatchSetUpdate objects in your request.  
     */
    Updates: GeoMatchSetUpdates;
  }
  export interface UpdateGeoMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the UpdateGeoMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateIPSetRequest {
    /**
     * The IPSetId of the IPSet that you want to update. IPSetId is returned by CreateIPSet and by ListIPSets.
     */
    IPSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    /**
     * An array of IPSetUpdate objects that you want to insert into or delete from an IPSet. For more information, see the applicable data types:    IPSetUpdate: Contains Action and IPSetDescriptor     IPSetDescriptor: Contains Type and Value    You can insert a maximum of 1000 addresses in a single request.
     */
    Updates: IPSetUpdates;
  }
  export interface UpdateIPSetResponse {
    /**
     * The ChangeToken that you used to submit the UpdateIPSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateRateBasedRuleRequest {
    /**
     * The RuleId of the RateBasedRule that you want to update. RuleId is returned by CreateRateBasedRule and by ListRateBasedRules.
     */
    RuleId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    /**
     * An array of RuleUpdate objects that you want to insert into or delete from a RateBasedRule. 
     */
    Updates: RuleUpdates;
    /**
     * The maximum number of requests, which have an identical value in the field specified by the RateKey, allowed in a five-minute period. If the number of requests exceeds the RateLimit and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.
     */
    RateLimit: RateLimit;
  }
  export interface UpdateRateBasedRuleResponse {
    /**
     * The ChangeToken that you used to submit the UpdateRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateRegexMatchSetRequest {
    /**
     * The RegexMatchSetId of the RegexMatchSet that you want to update. RegexMatchSetId is returned by CreateRegexMatchSet and by ListRegexMatchSets.
     */
    RegexMatchSetId: ResourceId;
    /**
     * An array of RegexMatchSetUpdate objects that you want to insert into or delete from a RegexMatchSet. For more information, see RegexMatchTuple.
     */
    Updates: RegexMatchSetUpdates;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface UpdateRegexMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the UpdateRegexMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateRegexPatternSetRequest {
    /**
     * The RegexPatternSetId of the RegexPatternSet that you want to update. RegexPatternSetId is returned by CreateRegexPatternSet and by ListRegexPatternSets.
     */
    RegexPatternSetId: ResourceId;
    /**
     * An array of RegexPatternSetUpdate objects that you want to insert into or delete from a RegexPatternSet.
     */
    Updates: RegexPatternSetUpdates;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface UpdateRegexPatternSetResponse {
    /**
     * The ChangeToken that you used to submit the UpdateRegexPatternSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateRuleGroupRequest {
    /**
     * The RuleGroupId of the RuleGroup that you want to update. RuleGroupId is returned by CreateRuleGroup and by ListRuleGroups.
     */
    RuleGroupId: ResourceId;
    /**
     * An array of RuleGroupUpdate objects that you want to insert into or delete from a RuleGroup. You can only insert REGULAR rules into a rule group.  ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL. In this case you do not use ActivatedRule|Action. For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction.
     */
    Updates: RuleGroupUpdates;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
  }
  export interface UpdateRuleGroupResponse {
    /**
     * The ChangeToken that you used to submit the UpdateRuleGroup request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateRuleRequest {
    /**
     * The RuleId of the Rule that you want to update. RuleId is returned by CreateRule and by ListRules.
     */
    RuleId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    /**
     * An array of RuleUpdate objects that you want to insert into or delete from a Rule. For more information, see the applicable data types:    RuleUpdate: Contains Action and Predicate     Predicate: Contains DataId, Negated, and Type     FieldToMatch: Contains Data and Type   
     */
    Updates: RuleUpdates;
  }
  export interface UpdateRuleResponse {
    /**
     * The ChangeToken that you used to submit the UpdateRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateSizeConstraintSetRequest {
    /**
     * The SizeConstraintSetId of the SizeConstraintSet that you want to update. SizeConstraintSetId is returned by CreateSizeConstraintSet and by ListSizeConstraintSets.
     */
    SizeConstraintSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    /**
     * An array of SizeConstraintSetUpdate objects that you want to insert into or delete from a SizeConstraintSet. For more information, see the applicable data types:    SizeConstraintSetUpdate: Contains Action and SizeConstraint     SizeConstraint: Contains FieldToMatch, TextTransformation, ComparisonOperator, and Size     FieldToMatch: Contains Data and Type   
     */
    Updates: SizeConstraintSetUpdates;
  }
  export interface UpdateSizeConstraintSetResponse {
    /**
     * The ChangeToken that you used to submit the UpdateSizeConstraintSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateSqlInjectionMatchSetRequest {
    /**
     * The SqlInjectionMatchSetId of the SqlInjectionMatchSet that you want to update. SqlInjectionMatchSetId is returned by CreateSqlInjectionMatchSet and by ListSqlInjectionMatchSets.
     */
    SqlInjectionMatchSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    /**
     * An array of SqlInjectionMatchSetUpdate objects that you want to insert into or delete from a SqlInjectionMatchSet. For more information, see the applicable data types:    SqlInjectionMatchSetUpdate: Contains Action and SqlInjectionMatchTuple     SqlInjectionMatchTuple: Contains FieldToMatch and TextTransformation     FieldToMatch: Contains Data and Type   
     */
    Updates: SqlInjectionMatchSetUpdates;
  }
  export interface UpdateSqlInjectionMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the UpdateSqlInjectionMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateWebACLRequest {
    /**
     * The WebACLId of the WebACL that you want to update. WebACLId is returned by CreateWebACL and by ListWebACLs.
     */
    WebACLId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    /**
     * An array of updates to make to the WebACL. An array of WebACLUpdate objects that you want to insert into or delete from a WebACL. For more information, see the applicable data types:    WebACLUpdate: Contains Action and ActivatedRule     ActivatedRule: Contains Action, OverrideAction, Priority, RuleId, and Type. ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL. In this case, you do not use ActivatedRule|Action. For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction.     WafAction: Contains Type   
     */
    Updates?: WebACLUpdates;
    /**
     * A default action for the web ACL, either ALLOW or BLOCK. AWS WAF performs the default action if a request doesn't match the criteria in any of the rules in a web ACL.
     */
    DefaultAction?: WafAction;
  }
  export interface UpdateWebACLResponse {
    /**
     * The ChangeToken that you used to submit the UpdateWebACL request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface UpdateXssMatchSetRequest {
    /**
     * The XssMatchSetId of the XssMatchSet that you want to update. XssMatchSetId is returned by CreateXssMatchSet and by ListXssMatchSets.
     */
    XssMatchSetId: ResourceId;
    /**
     * The value returned by the most recent call to GetChangeToken.
     */
    ChangeToken: ChangeToken;
    /**
     * An array of XssMatchSetUpdate objects that you want to insert into or delete from an XssMatchSet. For more information, see the applicable data types:    XssMatchSetUpdate: Contains Action and XssMatchTuple     XssMatchTuple: Contains FieldToMatch and TextTransformation     FieldToMatch: Contains Data and Type   
     */
    Updates: XssMatchSetUpdates;
  }
  export interface UpdateXssMatchSetResponse {
    /**
     * The ChangeToken that you used to submit the UpdateXssMatchSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
     */
    ChangeToken?: ChangeToken;
  }
  export interface WafAction {
    /**
     * Specifies how you want AWS WAF to respond to requests that match the settings in a Rule. Valid settings include the following:    ALLOW: AWS WAF allows requests    BLOCK: AWS WAF blocks requests    COUNT: AWS WAF increments a counter of the requests that match all of the conditions in the rule. AWS WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can't specify COUNT for the default action for a WebACL.  
     */
    Type: WafActionType;
  }
  export type WafActionType = "BLOCK"|"ALLOW"|"COUNT"|string;
  export interface WafOverrideAction {
    /**
     *  COUNT overrides the action specified by the individual rule within a RuleGroup . If set to NONE, the rule's action will take place.
     */
    Type: WafOverrideActionType;
  }
  export type WafOverrideActionType = "NONE"|"COUNT"|string;
  export type WafRuleType = "REGULAR"|"RATE_BASED"|"GROUP"|string;
  export interface WebACL {
    /**
     * A unique identifier for a WebACL. You use WebACLId to get information about a WebACL (see GetWebACL), update a WebACL (see UpdateWebACL), and delete a WebACL from AWS WAF (see DeleteWebACL).  WebACLId is returned by CreateWebACL and by ListWebACLs.
     */
    WebACLId: ResourceId;
    /**
     * A friendly name or description of the WebACL. You can't change the name of a WebACL after you create it.
     */
    Name?: ResourceName;
    /**
     * A friendly name or description for the metrics for this WebACL. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change MetricName after you create the WebACL.
     */
    MetricName?: MetricName;
    /**
     * The action to perform if none of the Rules contained in the WebACL match. The action is specified by the WafAction object.
     */
    DefaultAction: WafAction;
    /**
     * An array that contains the action for each Rule in a WebACL, the priority of the Rule, and the ID of the Rule.
     */
    Rules: ActivatedRules;
    /**
     * Tha Amazon Resource Name (ARN) of the web ACL.
     */
    WebACLArn?: ResourceArn;
  }
  export type WebACLSummaries = WebACLSummary[];
  export interface WebACLSummary {
    /**
     * A unique identifier for a WebACL. You use WebACLId to get information about a WebACL (see GetWebACL), update a WebACL (see UpdateWebACL), and delete a WebACL from AWS WAF (see DeleteWebACL).  WebACLId is returned by CreateWebACL and by ListWebACLs.
     */
    WebACLId: ResourceId;
    /**
     * A friendly name or description of the WebACL. You can't change the name of a WebACL after you create it.
     */
    Name: ResourceName;
  }
  export interface WebACLUpdate {
    /**
     * Specifies whether to insert a Rule into or delete a Rule from a WebACL.
     */
    Action: ChangeAction;
    /**
     * The ActivatedRule object in an UpdateWebACL request specifies a Rule that you want to insert or delete, the priority of the Rule in the WebACL, and the action that you want AWS WAF to take when a web request matches the Rule (ALLOW, BLOCK, or COUNT).
     */
    ActivatedRule: ActivatedRule;
  }
  export type WebACLUpdates = WebACLUpdate[];
  export interface XssMatchSet {
    /**
     * A unique identifier for an XssMatchSet. You use XssMatchSetId to get information about an XssMatchSet (see GetXssMatchSet), update an XssMatchSet (see UpdateXssMatchSet), insert an XssMatchSet into a Rule or delete one from a Rule (see UpdateRule), and delete an XssMatchSet from AWS WAF (see DeleteXssMatchSet).  XssMatchSetId is returned by CreateXssMatchSet and by ListXssMatchSets.
     */
    XssMatchSetId: ResourceId;
    /**
     * The name, if any, of the XssMatchSet.
     */
    Name?: ResourceName;
    /**
     * Specifies the parts of web requests that you want to inspect for cross-site scripting attacks.
     */
    XssMatchTuples: XssMatchTuples;
  }
  export type XssMatchSetSummaries = XssMatchSetSummary[];
  export interface XssMatchSetSummary {
    /**
     * A unique identifier for an XssMatchSet. You use XssMatchSetId to get information about a XssMatchSet (see GetXssMatchSet), update an XssMatchSet (see UpdateXssMatchSet), insert an XssMatchSet into a Rule or delete one from a Rule (see UpdateRule), and delete an XssMatchSet from AWS WAF (see DeleteXssMatchSet).  XssMatchSetId is returned by CreateXssMatchSet and by ListXssMatchSets.
     */
    XssMatchSetId: ResourceId;
    /**
     * The name of the XssMatchSet, if any, specified by Id.
     */
    Name: ResourceName;
  }
  export interface XssMatchSetUpdate {
    /**
     * Specify INSERT to add an XssMatchSetUpdate to an XssMatchSet. Use DELETE to remove an XssMatchSetUpdate from an XssMatchSet.
     */
    Action: ChangeAction;
    /**
     * Specifies the part of a web request that you want AWS WAF to inspect for cross-site scripting attacks and, if you want AWS WAF to inspect a header, the name of the header.
     */
    XssMatchTuple: XssMatchTuple;
  }
  export type XssMatchSetUpdates = XssMatchSetUpdate[];
  export interface XssMatchTuple {
    /**
     * Specifies where in a web request to look for cross-site scripting attacks.
     */
    FieldToMatch: FieldToMatch;
    /**
     * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting a request for a match. You can only specify a single type of TextTransformation.  CMD_LINE  When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations:   Delete the following characters: \ " ' ^   Delete spaces before the following characters: / (   Replace the following characters with a space: , ;   Replace multiple spaces with one space   Convert uppercase letters (A-Z) to lowercase (a-z)    COMPRESS_WHITE_SPACE  Use this option to replace the following characters with a space character (decimal 32):   \f, formfeed, decimal 12   \t, tab, decimal 9   \n, newline, decimal 10   \r, carriage return, decimal 13   \v, vertical tab, decimal 11   non-breaking space, decimal 160    COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.  HTML_ENTITY_DECODE  Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations:   Replaces (ampersand)quot; with "    Replaces (ampersand)nbsp; with a non-breaking space, decimal 160   Replaces (ampersand)lt; with a "less than" symbol   Replaces (ampersand)gt; with &gt;    Replaces characters that are represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding characters   Replaces characters that are represented in decimal format, (ampersand)#nnnn;, with the corresponding characters    LOWERCASE  Use this option to convert uppercase letters (A-Z) to lowercase (a-z).  URL_DECODE  Use this option to decode a URL-encoded value.  NONE  Specify NONE if you don't want to perform any text transformations.
     */
    TextTransformation: TextTransformation;
  }
  export type XssMatchTuples = XssMatchTuple[];
  /**
   * A string in YYYY-MM-DD format that represents the latest possible API version that can be used in this service. Specify 'latest' to use the latest possible version.
   */
  export type apiVersion = "2015-08-24"|"latest"|string;
  export interface ClientApiVersions {
    /**
     * A string in YYYY-MM-DD format that represents the latest possible API version that can be used in this service. Specify 'latest' to use the latest possible version.
     */
    apiVersion?: apiVersion;
  }
  export type ClientConfiguration = ServiceConfigurationOptions & ClientApiVersions;
  /**
   * Contains interfaces for use with the WAF client.
   */
  export import Types = WAF;
}
export = WAF;