"""
========================
Broadcasting over arrays
========================

.. note::
    See `this article
    <https://numpy.org/devdocs/user/theory.broadcasting.html>`_
    for illustrations of broadcasting concepts.


The term broadcasting describes how numpy treats arrays with different
shapes during arithmetic operations. Subject to certain constraints,
the smaller array is "broadcast" across the larger array so that they
have compatible shapes. Broadcasting provides a means of vectorizing
array operations so that looping occurs in C instead of Python. It does
this without making needless copies of data and usually leads to
efficient algorithm implementations. There are, however, cases where
broadcasting is a bad idea because it leads to inefficient use of memory
that slows computation.

NumPy operations are usually done on pairs of arrays on an
element-by-element basis.  In the simplest case, the two arrays must
have exactly the same shape, as in the following example:

  >>> a = np.array([1.0, 2.0, 3.0])
  >>> b = np.array([2.0, 2.0, 2.0])
  >>> a * b
  array([ 2.,  4.,  6.])

NumPy's broadcasting rule relaxes this constraint when the arrays'
shapes meet certain constraints. The simplest broadcasting example occurs
when an array and a scalar value are combined in an operation:

>>> a = np.array([1.0, 2.0, 3.0])
>>> b = 2.0
>>> a * b
array([ 2.,  4.,  6.])

The result is equivalent to the previous example where ``b`` was an array.
We can think of the scalar ``b`` being *stretched* during the arithmetic
operation into an array with the same shape as ``a``. The new elements in
``b`` are simply copies of the original scalar. The stretching analogy is
only conceptual.  NumPy is smart enough to use the original scalar value
without actually making copies so that broadcasting operations are as
memory and computationally efficient as possible.

The code in the second example is more efficient than that in the first
because broadcasting moves less memory around during the multiplication
(``b`` is a scalar rather than an array).

General Broadcasting Rules
==========================
When operating on two arrays, NumPy compares their shapes element-wise.
It starts with the trailing dimensions and works its way forward.  Two
dimensions are compatible when

1) they are equal, or
2) one of them is 1

If these conditions are not met, a
``ValueError: operands could not be broadcast together`` exception is 
thrown, indicating that the arrays have incompatible shapes. The size of 
the resulting array is the size that is not 1 along each axis of the inputs.

Arrays do not need to have the same *number* of dimensions.  For example,
if you have a ``256x256x3`` array of RGB values, and you want to scale
each color in the image by a different value, you can multiply the image
by a one-dimensional array with 3 values. Lining up the sizes of the
trailing axes of these arrays according to the broadcast rules, shows that
they are compatible::

  Image  (3d array): 256 x 256 x 3
  Scale  (1d array):             3
  Result (3d array): 256 x 256 x 3

When either of the dimensions compared is one, the other is
used.  In other words, dimensions with size 1 are stretched or "copied"
to match the other.

In the following example, both the ``A`` and ``B`` arrays have axes with
length one that are expanded to a larger size during the broadcast
operation::

  A      (4d array):  8 x 1 x 6 x 1
  B      (3d array):      7 x 1 x 5
  Result (4d array):  8 x 7 x 6 x 5

Here are some more examples::

  A      (2d array):  5 x 4
  B      (1d array):      1
  Result (2d array):  5 x 4

  A      (2d array):  5 x 4
  B      (1d array):      4
  Result (2d array):  5 x 4

  A      (3d array):  15 x 3 x 5
  B      (3d array):  15 x 1 x 5
  Result (3d array):  15 x 3 x 5

  A      (3d array):  15 x 3 x 5
  B      (2d array):       3 x 5
  Result (3d array):  15 x 3 x 5

  A      (3d array):  15 x 3 x 5
  B      (2d array):       3 x 1
  Result (3d array):  15 x 3 x 5

Here are examples of shapes that do not broadcast::

  A      (1d array):  3
  B      (1d array):  4 # trailing dimensions do not match

  A      (2d array):      2 x 1
  B      (3d array):  8 x 4 x 3 # second from last dimensions mismatched

An example of broadcasting in practice::

 >>> x = np.arange(4)
 >>> xx = x.reshape(4,1)
 >>> y = np.ones(5)
 >>> z = np.ones((3,4))

 >>> x.shape
 (4,)

 >>> y.shape
 (5,)

 >>> x + y
 ValueError: operands could not be broadcast together with shapes (4,) (5,)

 >>> xx.shape
 (4, 1)

 >>> y.shape
 (5,)

 >>> (xx + y).shape
 (4, 5)

 >>> xx + y
 array([[ 1.,  1.,  1.,  1.,  1.],
        [ 2.,  2.,  2.,  2.,  2.],
        [ 3.,  3.,  3.,  3.,  3.],
        [ 4.,  4.,  4.,  4.,  4.]])

 >>> x.shape
 (4,)

 >>> z.shape
 (3, 4)

 >>> (x + z).shape
 (3, 4)

 >>> x + z
 array([[ 1.,  2.,  3.,  4.],
        [ 1.,  2.,  3.,  4.],
        [ 1.,  2.,  3.,  4.]])

Broadcasting provides a convenient way of taking the outer product (or
any other outer operation) of two arrays. The following example shows an
outer addition operation of two 1-d arrays::

  >>> a = np.array([0.0, 10.0, 20.0, 30.0])
  >>> b = np.array([1.0, 2.0, 3.0])
  >>> a[:, np.newaxis] + b
  array([[  1.,   2.,   3.],
         [ 11.,  12.,  13.],
         [ 21.,  22.,  23.],
         [ 31.,  32.,  33.]])

Here the ``newaxis`` index operator inserts a new axis into ``a``,
making it a two-dimensional ``4x1`` array.  Combining the ``4x1`` array
with ``b``, which has shape ``(3,)``, yields a ``4x3`` array.

"""
from __future__ import division, absolute_import, print_function