# Author: Travis Oliphant
from __future__ import division, print_function, absolute_import

__all__ = ['odeint']

import numpy as np
from . import _odepack
from copy import copy
import warnings


class ODEintWarning(Warning):
    pass


_msgs = {2: "Integration successful.",
         1: "Nothing was done; the integration time was 0.",
         -1: "Excess work done on this call (perhaps wrong Dfun type).",
         -2: "Excess accuracy requested (tolerances too small).",
         -3: "Illegal input detected (internal error).",
         -4: "Repeated error test failures (internal error).",
         -5: "Repeated convergence failures (perhaps bad Jacobian or tolerances).",
         -6: "Error weight became zero during problem.",
         -7: "Internal workspace insufficient to finish (internal error).",
         -8: "Run terminated (internal error)."
         }


def odeint(func, y0, t, args=(), Dfun=None, col_deriv=0, full_output=0,
           ml=None, mu=None, rtol=None, atol=None, tcrit=None, h0=0.0,
           hmax=0.0, hmin=0.0, ixpr=0, mxstep=0, mxhnil=0, mxordn=12,
           mxords=5, printmessg=0, tfirst=False):
    """
    Integrate a system of ordinary differential equations.
    
    .. note:: For new code, use `scipy.integrate.solve_ivp` to solve a
              differential equation.

    Solve a system of ordinary differential equations using lsoda from the
    FORTRAN library odepack.

    Solves the initial value problem for stiff or non-stiff systems
    of first order ode-s::

        dy/dt = func(y, t, ...)  [or func(t, y, ...)]

    where y can be a vector.

    .. note:: By default, the required order of the first two arguments of
              `func` are in the opposite order of the arguments in the system
              definition function used by the `scipy.integrate.ode` class and
              the function `scipy.integrate.solve_ivp`.  To use a function with
              the signature ``func(t, y, ...)``, the argument `tfirst` must be
              set to ``True``.

    Parameters
    ----------
    func : callable(y, t, ...) or callable(t, y, ...)
        Computes the derivative of y at t.
        If the signature is ``callable(t, y, ...)``, then the argument
        `tfirst` must be set ``True``.
    y0 : array
        Initial condition on y (can be a vector).
    t : array
        A sequence of time points for which to solve for y.  The initial
        value point should be the first element of this sequence.
        This sequence must be monotonically increasing or monotonically
        decreasing; repeated values are allowed.
    args : tuple, optional
        Extra arguments to pass to function.
    Dfun : callable(y, t, ...) or callable(t, y, ...)
        Gradient (Jacobian) of `func`.
        If the signature is ``callable(t, y, ...)``, then the argument
        `tfirst` must be set ``True``.
    col_deriv : bool, optional
        True if `Dfun` defines derivatives down columns (faster),
        otherwise `Dfun` should define derivatives across rows.
    full_output : bool, optional
        True if to return a dictionary of optional outputs as the second output
    printmessg : bool, optional
        Whether to print the convergence message
    tfirst: bool, optional
        If True, the first two arguments of `func` (and `Dfun`, if given)
        must ``t, y`` instead of the default ``y, t``.

        .. versionadded:: 1.1.0

    Returns
    -------
    y : array, shape (len(t), len(y0))
        Array containing the value of y for each desired time in t,
        with the initial value `y0` in the first row.
    infodict : dict, only returned if full_output == True
        Dictionary containing additional output information

        =======  ============================================================
        key      meaning
        =======  ============================================================
        'hu'     vector of step sizes successfully used for each time step.
        'tcur'   vector with the value of t reached for each time step.
                 (will always be at least as large as the input times).
        'tolsf'  vector of tolerance scale factors, greater than 1.0,
                 computed when a request for too much accuracy was detected.
        'tsw'    value of t at the time of the last method switch
                 (given for each time step)
        'nst'    cumulative number of time steps
        'nfe'    cumulative number of function evaluations for each time step
        'nje'    cumulative number of jacobian evaluations for each time step
        'nqu'    a vector of method orders for each successful step.
        'imxer'  index of the component of largest magnitude in the
                 weighted local error vector (e / ewt) on an error return, -1
                 otherwise.
        'lenrw'  the length of the double work array required.
        'leniw'  the length of integer work array required.
        'mused'  a vector of method indicators for each successful time step:
                 1: adams (nonstiff), 2: bdf (stiff)
        =======  ============================================================

    Other Parameters
    ----------------
    ml, mu : int, optional
        If either of these are not None or non-negative, then the
        Jacobian is assumed to be banded.  These give the number of
        lower and upper non-zero diagonals in this banded matrix.
        For the banded case, `Dfun` should return a matrix whose
        rows contain the non-zero bands (starting with the lowest diagonal).
        Thus, the return matrix `jac` from `Dfun` should have shape
        ``(ml + mu + 1, len(y0))`` when ``ml >=0`` or ``mu >=0``.
        The data in `jac` must be stored such that ``jac[i - j + mu, j]``
        holds the derivative of the `i`th equation with respect to the `j`th
        state variable.  If `col_deriv` is True, the transpose of this
        `jac` must be returned.
    rtol, atol : float, optional
        The input parameters `rtol` and `atol` determine the error
        control performed by the solver.  The solver will control the
        vector, e, of estimated local errors in y, according to an
        inequality of the form ``max-norm of (e / ewt) <= 1``,
        where ewt is a vector of positive error weights computed as
        ``ewt = rtol * abs(y) + atol``.
        rtol and atol can be either vectors the same length as y or scalars.
        Defaults to 1.49012e-8.
    tcrit : ndarray, optional
        Vector of critical points (e.g. singularities) where integration
        care should be taken.
    h0 : float, (0: solver-determined), optional
        The step size to be attempted on the first step.
    hmax : float, (0: solver-determined), optional
        The maximum absolute step size allowed.
    hmin : float, (0: solver-determined), optional
        The minimum absolute step size allowed.
    ixpr : bool, optional
        Whether to generate extra printing at method switches.
    mxstep : int, (0: solver-determined), optional
        Maximum number of (internally defined) steps allowed for each
        integration point in t.
    mxhnil : int, (0: solver-determined), optional
        Maximum number of messages printed.
    mxordn : int, (0: solver-determined), optional
        Maximum order to be allowed for the non-stiff (Adams) method.
    mxords : int, (0: solver-determined), optional
        Maximum order to be allowed for the stiff (BDF) method.

    See Also
    --------
    solve_ivp : Solve an initial value problem for a system of ODEs.
    ode : a more object-oriented integrator based on VODE.
    quad : for finding the area under a curve.

    Examples
    --------
    The second order differential equation for the angle `theta` of a
    pendulum acted on by gravity with friction can be written::

        theta''(t) + b*theta'(t) + c*sin(theta(t)) = 0

    where `b` and `c` are positive constants, and a prime (') denotes a
    derivative.  To solve this equation with `odeint`, we must first convert
    it to a system of first order equations.  By defining the angular
    velocity ``omega(t) = theta'(t)``, we obtain the system::

        theta'(t) = omega(t)
        omega'(t) = -b*omega(t) - c*sin(theta(t))

    Let `y` be the vector [`theta`, `omega`].  We implement this system
    in python as:

    >>> def pend(y, t, b, c):
    ...     theta, omega = y
    ...     dydt = [omega, -b*omega - c*np.sin(theta)]
    ...     return dydt
    ...
    
    We assume the constants are `b` = 0.25 and `c` = 5.0:

    >>> b = 0.25
    >>> c = 5.0

    For initial conditions, we assume the pendulum is nearly vertical
    with `theta(0)` = `pi` - 0.1, and is initially at rest, so
    `omega(0)` = 0.  Then the vector of initial conditions is

    >>> y0 = [np.pi - 0.1, 0.0]

    We will generate a solution at 101 evenly spaced samples in the interval
    0 <= `t` <= 10.  So our array of times is:

    >>> t = np.linspace(0, 10, 101)

    Call `odeint` to generate the solution.  To pass the parameters
    `b` and `c` to `pend`, we give them to `odeint` using the `args`
    argument.

    >>> from scipy.integrate import odeint
    >>> sol = odeint(pend, y0, t, args=(b, c))

    The solution is an array with shape (101, 2).  The first column
    is `theta(t)`, and the second is `omega(t)`.  The following code
    plots both components.

    >>> import matplotlib.pyplot as plt
    >>> plt.plot(t, sol[:, 0], 'b', label='theta(t)')
    >>> plt.plot(t, sol[:, 1], 'g', label='omega(t)')
    >>> plt.legend(loc='best')
    >>> plt.xlabel('t')
    >>> plt.grid()
    >>> plt.show()
    """

    if ml is None:
        ml = -1  # changed to zero inside function call
    if mu is None:
        mu = -1  # changed to zero inside function call

    dt = np.diff(t)
    if not((dt >= 0).all() or (dt <= 0).all()):
        raise ValueError("The values in t must be monotonically increasing "
                         "or monotonically decreasing; repeated values are "
                         "allowed.")

    t = copy(t)
    y0 = copy(y0)
    output = _odepack.odeint(func, y0, t, args, Dfun, col_deriv, ml, mu,
                             full_output, rtol, atol, tcrit, h0, hmax, hmin,
                             ixpr, mxstep, mxhnil, mxordn, mxords,
                             int(bool(tfirst)))
    if output[-1] < 0:
        warning_msg = _msgs[output[-1]] + " Run with full_output = 1 to get quantitative information."
        warnings.warn(warning_msg, ODEintWarning)
    elif printmessg:
        warning_msg = _msgs[output[-1]]
        warnings.warn(warning_msg, ODEintWarning)

    if full_output:
        output[1]['message'] = _msgs[output[-1]]

    output = output[:-1]
    if len(output) == 1:
        return output[0]
    else:
        return output