"""Sparse Equations and Least Squares.

The original Fortran code was written by C. C. Paige and M. A. Saunders as
described in

C. C. Paige and M. A. Saunders, LSQR: An algorithm for sparse linear
equations and sparse least squares, TOMS 8(1), 43--71 (1982).

C. C. Paige and M. A. Saunders, Algorithm 583; LSQR: Sparse linear
equations and least-squares problems, TOMS 8(2), 195--209 (1982).

It is licensed under the following BSD license:

Copyright (c) 2006, Systems Optimization Laboratory
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

    * Redistributions of source code must retain the above copyright
      notice, this list of conditions and the following disclaimer.

    * Redistributions in binary form must reproduce the above
      copyright notice, this list of conditions and the following
      disclaimer in the documentation and/or other materials provided
      with the distribution.

    * Neither the name of Stanford University nor the names of its
      contributors may be used to endorse or promote products derived
      from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The Fortran code was translated to Python for use in CVXOPT by Jeffery
Kline with contributions by Mridul Aanjaneya and Bob Myhill.

Adapted for SciPy by Stefan van der Walt.

"""

__all__ = ['lsqr']

import numpy as np
from math import sqrt
from scipy.sparse.linalg.interface import aslinearoperator

eps = np.finfo(np.float64).eps


def _sym_ortho(a, b):
    """
    Stable implementation of Givens rotation.

    Notes
    -----
    The routine 'SymOrtho' was added for numerical stability. This is
    recommended by S.-C. Choi in [1]_.  It removes the unpleasant potential of
    ``1/eps`` in some important places (see, for example text following
    "Compute the next plane rotation Qk" in minres.py).

    References
    ----------
    .. [1] S.-C. Choi, "Iterative Methods for Singular Linear Equations
           and Least-Squares Problems", Dissertation,
           http://www.stanford.edu/group/SOL/dissertations/sou-cheng-choi-thesis.pdf

    """
    if b == 0:
        return np.sign(a), 0, abs(a)
    elif a == 0:
        return 0, np.sign(b), abs(b)
    elif abs(b) > abs(a):
        tau = a / b
        s = np.sign(b) / sqrt(1 + tau * tau)
        c = s * tau
        r = b / s
    else:
        tau = b / a
        c = np.sign(a) / sqrt(1+tau*tau)
        s = c * tau
        r = a / c
    return c, s, r


def lsqr(A, b, damp=0.0, atol=1e-8, btol=1e-8, conlim=1e8,
         iter_lim=None, show=False, calc_var=False, x0=None):
    """Find the least-squares solution to a large, sparse, linear system
    of equations.

    The function solves ``Ax = b``  or  ``min ||Ax - b||^2`` or
    ``min ||Ax - b||^2 + d^2 ||x||^2``.

    The matrix A may be square or rectangular (over-determined or
    under-determined), and may have any rank.

    ::

      1. Unsymmetric equations --    solve  A*x = b

      2. Linear least squares  --    solve  A*x = b
                                     in the least-squares sense

      3. Damped least squares  --    solve  (   A    )*x = ( b )
                                            ( damp*I )     ( 0 )
                                     in the least-squares sense

    Parameters
    ----------
    A : {sparse matrix, ndarray, LinearOperator}
        Representation of an m-by-n matrix.
        Alternatively, ``A`` can be a linear operator which can
        produce ``Ax`` and ``A^T x`` using, e.g.,
        ``scipy.sparse.linalg.LinearOperator``.
    b : array_like, shape (m,)
        Right-hand side vector ``b``.
    damp : float
        Damping coefficient.
    atol, btol : float, optional
        Stopping tolerances. If both are 1.0e-9 (say), the final
        residual norm should be accurate to about 9 digits.  (The
        final x will usually have fewer correct digits, depending on
        cond(A) and the size of damp.)
    conlim : float, optional
        Another stopping tolerance.  lsqr terminates if an estimate of
        ``cond(A)`` exceeds `conlim`.  For compatible systems ``Ax =
        b``, `conlim` could be as large as 1.0e+12 (say).  For
        least-squares problems, conlim should be less than 1.0e+8.
        Maximum precision can be obtained by setting ``atol = btol =
        conlim = zero``, but the number of iterations may then be
        excessive.
    iter_lim : int, optional
        Explicit limitation on number of iterations (for safety).
    show : bool, optional
        Display an iteration log.
    calc_var : bool, optional
        Whether to estimate diagonals of ``(A'A + damp^2*I)^{-1}``.
    x0 : array_like, shape (n,), optional
        Initial guess of x, if None zeros are used.

        .. versionadded:: 1.0.0

    Returns
    -------
    x : ndarray of float
        The final solution.
    istop : int
        Gives the reason for termination.
        1 means x is an approximate solution to Ax = b.
        2 means x approximately solves the least-squares problem.
    itn : int
        Iteration number upon termination.
    r1norm : float
        ``norm(r)``, where ``r = b - Ax``.
    r2norm : float
        ``sqrt( norm(r)^2  +  damp^2 * norm(x)^2 )``.  Equal to `r1norm` if
        ``damp == 0``.
    anorm : float
        Estimate of Frobenius norm of ``Abar = [[A]; [damp*I]]``.
    acond : float
        Estimate of ``cond(Abar)``.
    arnorm : float
        Estimate of ``norm(A'*r - damp^2*x)``.
    xnorm : float
        ``norm(x)``
    var : ndarray of float
        If ``calc_var`` is True, estimates all diagonals of
        ``(A'A)^{-1}`` (if ``damp == 0``) or more generally ``(A'A +
        damp^2*I)^{-1}``.  This is well defined if A has full column
        rank or ``damp > 0``.  (Not sure what var means if ``rank(A)
        < n`` and ``damp = 0.``)

    Notes
    -----
    LSQR uses an iterative method to approximate the solution.  The
    number of iterations required to reach a certain accuracy depends
    strongly on the scaling of the problem.  Poor scaling of the rows
    or columns of A should therefore be avoided where possible.

    For example, in problem 1 the solution is unaltered by
    row-scaling.  If a row of A is very small or large compared to
    the other rows of A, the corresponding row of ( A  b ) should be
    scaled up or down.

    In problems 1 and 2, the solution x is easily recovered
    following column-scaling.  Unless better information is known,
    the nonzero columns of A should be scaled so that they all have
    the same Euclidean norm (e.g., 1.0).

    In problem 3, there is no freedom to re-scale if damp is
    nonzero.  However, the value of damp should be assigned only
    after attention has been paid to the scaling of A.

    The parameter damp is intended to help regularize
    ill-conditioned systems, by preventing the true solution from
    being very large.  Another aid to regularization is provided by
    the parameter acond, which may be used to terminate iterations
    before the computed solution becomes very large.

    If some initial estimate ``x0`` is known and if ``damp == 0``,
    one could proceed as follows:

      1. Compute a residual vector ``r0 = b - A*x0``.
      2. Use LSQR to solve the system  ``A*dx = r0``.
      3. Add the correction dx to obtain a final solution ``x = x0 + dx``.

    This requires that ``x0`` be available before and after the call
    to LSQR.  To judge the benefits, suppose LSQR takes k1 iterations
    to solve A*x = b and k2 iterations to solve A*dx = r0.
    If x0 is "good", norm(r0) will be smaller than norm(b).
    If the same stopping tolerances atol and btol are used for each
    system, k1 and k2 will be similar, but the final solution x0 + dx
    should be more accurate.  The only way to reduce the total work
    is to use a larger stopping tolerance for the second system.
    If some value btol is suitable for A*x = b, the larger value
    btol*norm(b)/norm(r0)  should be suitable for A*dx = r0.

    Preconditioning is another way to reduce the number of iterations.
    If it is possible to solve a related system ``M*x = b``
    efficiently, where M approximates A in some helpful way (e.g. M -
    A has low rank or its elements are small relative to those of A),
    LSQR may converge more rapidly on the system ``A*M(inverse)*z =
    b``, after which x can be recovered by solving M*x = z.

    If A is symmetric, LSQR should not be used!

    Alternatives are the symmetric conjugate-gradient method (cg)
    and/or SYMMLQ.  SYMMLQ is an implementation of symmetric cg that
    applies to any symmetric A and will converge more rapidly than
    LSQR.  If A is positive definite, there are other implementations
    of symmetric cg that require slightly less work per iteration than
    SYMMLQ (but will take the same number of iterations).

    References
    ----------
    .. [1] C. C. Paige and M. A. Saunders (1982a).
           "LSQR: An algorithm for sparse linear equations and
           sparse least squares", ACM TOMS 8(1), 43-71.
    .. [2] C. C. Paige and M. A. Saunders (1982b).
           "Algorithm 583.  LSQR: Sparse linear equations and least
           squares problems", ACM TOMS 8(2), 195-209.
    .. [3] M. A. Saunders (1995).  "Solution of sparse rectangular
           systems using LSQR and CRAIG", BIT 35, 588-604.

    Examples
    --------
    >>> from scipy.sparse import csc_matrix
    >>> from scipy.sparse.linalg import lsqr
    >>> A = csc_matrix([[1., 0.], [1., 1.], [0., 1.]], dtype=float)

    The first example has the trivial solution `[0, 0]`

    >>> b = np.array([0., 0., 0.], dtype=float)
    >>> x, istop, itn, normr = lsqr(A, b)[:4]
    The exact solution is  x = 0
    >>> istop
    0
    >>> x
    array([ 0.,  0.])

    The stopping code `istop=0` returned indicates that a vector of zeros was
    found as a solution. The returned solution `x` indeed contains `[0., 0.]`.
    The next example has a non-trivial solution:

    >>> b = np.array([1., 0., -1.], dtype=float)
    >>> x, istop, itn, r1norm = lsqr(A, b)[:4]
    >>> istop
    1
    >>> x
    array([ 1., -1.])
    >>> itn
    1
    >>> r1norm
    4.440892098500627e-16

    As indicated by `istop=1`, `lsqr` found a solution obeying the tolerance
    limits. The given solution `[1., -1.]` obviously solves the equation. The
    remaining return values include information about the number of iterations
    (`itn=1`) and the remaining difference of left and right side of the solved
    equation.
    The final example demonstrates the behavior in the case where there is no
    solution for the equation:

    >>> b = np.array([1., 0.01, -1.], dtype=float)
    >>> x, istop, itn, r1norm = lsqr(A, b)[:4]
    >>> istop
    2
    >>> x
    array([ 1.00333333, -0.99666667])
    >>> A.dot(x)-b
    array([ 0.00333333, -0.00333333,  0.00333333])
    >>> r1norm
    0.005773502691896255

    `istop` indicates that the system is inconsistent and thus `x` is rather an
    approximate solution to the corresponding least-squares problem. `r1norm`
    contains the norm of the minimal residual that was found.
    """
    A = aslinearoperator(A)
    b = np.atleast_1d(b)
    if b.ndim > 1:
        b = b.squeeze()

    m, n = A.shape
    if iter_lim is None:
        iter_lim = 2 * n
    var = np.zeros(n)

    msg = ('The exact solution is  x = 0                              ',
         'Ax - b is small enough, given atol, btol                  ',
         'The least-squares solution is good enough, given atol     ',
         'The estimate of cond(Abar) has exceeded conlim            ',
         'Ax - b is small enough for this machine                   ',
         'The least-squares solution is good enough for this machine',
         'Cond(Abar) seems to be too large for this machine         ',
         'The iteration limit has been reached                      ')

    if show:
        print(' ')
        print('LSQR            Least-squares solution of  Ax = b')
        str1 = f'The matrix A has {m} rows and {n} columns'
        str2 = 'damp = %20.14e   calc_var = %8g' % (damp, calc_var)
        str3 = 'atol = %8.2e                 conlim = %8.2e' % (atol, conlim)
        str4 = 'btol = %8.2e               iter_lim = %8g' % (btol, iter_lim)
        print(str1)
        print(str2)
        print(str3)
        print(str4)

    itn = 0
    istop = 0
    ctol = 0
    if conlim > 0:
        ctol = 1/conlim
    anorm = 0
    acond = 0
    dampsq = damp**2
    ddnorm = 0
    res2 = 0
    xnorm = 0
    xxnorm = 0
    z = 0
    cs2 = -1
    sn2 = 0

    """
    Set up the first vectors u and v for the bidiagonalization.
    These satisfy  beta*u = b - A*x,  alfa*v = A'*u.
    """
    u = b
    bnorm = np.linalg.norm(b)
    if x0 is None:
        x = np.zeros(n)
        beta = bnorm.copy()
    else:
        x = np.asarray(x0)
        u = u - A.matvec(x)
        beta = np.linalg.norm(u)

    if beta > 0:
        u = (1/beta) * u
        v = A.rmatvec(u)
        alfa = np.linalg.norm(v)
    else:
        v = x.copy()
        alfa = 0

    if alfa > 0:
        v = (1/alfa) * v
    w = v.copy()

    rhobar = alfa
    phibar = beta
    rnorm = beta
    r1norm = rnorm
    r2norm = rnorm

    # Reverse the order here from the original matlab code because
    # there was an error on return when arnorm==0
    arnorm = alfa * beta
    if arnorm == 0:
        print(msg[0])
        return x, istop, itn, r1norm, r2norm, anorm, acond, arnorm, xnorm, var

    head1 = '   Itn      x[0]       r1norm     r2norm '
    head2 = ' Compatible    LS      Norm A   Cond A'

    if show:
        print(' ')
        print(head1, head2)
        test1 = 1
        test2 = alfa / beta
        str1 = '%6g %12.5e' % (itn, x[0])
        str2 = ' %10.3e %10.3e' % (r1norm, r2norm)
        str3 = '  %8.1e %8.1e' % (test1, test2)
        print(str1, str2, str3)

    # Main iteration loop.
    while itn < iter_lim:
        itn = itn + 1
        """
        %     Perform the next step of the bidiagonalization to obtain the
        %     next  beta, u, alfa, v.  These satisfy the relations
        %                beta*u  =  a*v   -  alfa*u,
        %                alfa*v  =  A'*u  -  beta*v.
        """
        u = A.matvec(v) - alfa * u
        beta = np.linalg.norm(u)

        if beta > 0:
            u = (1/beta) * u
            anorm = sqrt(anorm**2 + alfa**2 + beta**2 + damp**2)
            v = A.rmatvec(u) - beta * v
            alfa = np.linalg.norm(v)
            if alfa > 0:
                v = (1 / alfa) * v

        # Use a plane rotation to eliminate the damping parameter.
        # This alters the diagonal (rhobar) of the lower-bidiagonal matrix.
        rhobar1 = sqrt(rhobar**2 + damp**2)
        cs1 = rhobar / rhobar1
        sn1 = damp / rhobar1
        psi = sn1 * phibar
        phibar = cs1 * phibar

        # Use a plane rotation to eliminate the subdiagonal element (beta)
        # of the lower-bidiagonal matrix, giving an upper-bidiagonal matrix.
        cs, sn, rho = _sym_ortho(rhobar1, beta)

        theta = sn * alfa
        rhobar = -cs * alfa
        phi = cs * phibar
        phibar = sn * phibar
        tau = sn * phi

        # Update x and w.
        t1 = phi / rho
        t2 = -theta / rho
        dk = (1 / rho) * w

        x = x + t1 * w
        w = v + t2 * w
        ddnorm = ddnorm + np.linalg.norm(dk)**2

        if calc_var:
            var = var + dk**2

        # Use a plane rotation on the right to eliminate the
        # super-diagonal element (theta) of the upper-bidiagonal matrix.
        # Then use the result to estimate norm(x).
        delta = sn2 * rho
        gambar = -cs2 * rho
        rhs = phi - delta * z
        zbar = rhs / gambar
        xnorm = sqrt(xxnorm + zbar**2)
        gamma = sqrt(gambar**2 + theta**2)
        cs2 = gambar / gamma
        sn2 = theta / gamma
        z = rhs / gamma
        xxnorm = xxnorm + z**2

        # Test for convergence.
        # First, estimate the condition of the matrix  Abar,
        # and the norms of  rbar  and  Abar'rbar.
        acond = anorm * sqrt(ddnorm)
        res1 = phibar**2
        res2 = res2 + psi**2
        rnorm = sqrt(res1 + res2)
        arnorm = alfa * abs(tau)

        # Distinguish between
        #    r1norm = ||b - Ax|| and
        #    r2norm = rnorm in current code
        #           = sqrt(r1norm^2 + damp^2*||x||^2).
        #    Estimate r1norm from
        #    r1norm = sqrt(r2norm^2 - damp^2*||x||^2).
        # Although there is cancellation, it might be accurate enough.
        r1sq = rnorm**2 - dampsq * xxnorm
        r1norm = sqrt(abs(r1sq))
        if r1sq < 0:
            r1norm = -r1norm
        r2norm = rnorm

        # Now use these norms to estimate certain other quantities,
        # some of which will be small near a solution.
        test1 = rnorm / bnorm
        test2 = arnorm / (anorm * rnorm + eps)
        test3 = 1 / (acond + eps)
        t1 = test1 / (1 + anorm * xnorm / bnorm)
        rtol = btol + atol * anorm * xnorm / bnorm

        # The following tests guard against extremely small values of
        # atol, btol  or  ctol.  (The user may have set any or all of
        # the parameters  atol, btol, conlim  to 0.)
        # The effect is equivalent to the normal tests using
        # atol = eps,  btol = eps,  conlim = 1/eps.
        if itn >= iter_lim:
            istop = 7
        if 1 + test3 <= 1:
            istop = 6
        if 1 + test2 <= 1:
            istop = 5
        if 1 + t1 <= 1:
            istop = 4

        # Allow for tolerances set by the user.
        if test3 <= ctol:
            istop = 3
        if test2 <= atol:
            istop = 2
        if test1 <= rtol:
            istop = 1

        # See if it is time to print something.
        prnt = False
        if n <= 40:
            prnt = True
        if itn <= 10:
            prnt = True
        if itn >= iter_lim-10:
            prnt = True
        # if itn%10 == 0: prnt = True
        if test3 <= 2*ctol:
            prnt = True
        if test2 <= 10*atol:
            prnt = True
        if test1 <= 10*rtol:
            prnt = True
        if istop != 0:
            prnt = True

        if prnt:
            if show:
                str1 = '%6g %12.5e' % (itn, x[0])
                str2 = ' %10.3e %10.3e' % (r1norm, r2norm)
                str3 = '  %8.1e %8.1e' % (test1, test2)
                str4 = ' %8.1e %8.1e' % (anorm, acond)
                print(str1, str2, str3, str4)

        if istop != 0:
            break

    # End of iteration loop.
    # Print the stopping condition.
    if show:
        print(' ')
        print('LSQR finished')
        print(msg[istop])
        print(' ')
        str1 = 'istop =%8g   r1norm =%8.1e' % (istop, r1norm)
        str2 = 'anorm =%8.1e   arnorm =%8.1e' % (anorm, arnorm)
        str3 = 'itn   =%8g   r2norm =%8.1e' % (itn, r2norm)
        str4 = 'acond =%8.1e   xnorm  =%8.1e' % (acond, xnorm)
        print(str1 + '   ' + str2)
        print(str3 + '   ' + str4)
        print(' ')

    return x, istop, itn, r1norm, r2norm, anorm, acond, arnorm, xnorm, var