board.h
21 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
/************************************************************************************
* nuttx-configs/px4_fmu-v6x/include/board.h
*
* Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
* Authors: David Sidrane <david.sidrane@nscdg.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H
#define __NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include "board_dma_map.h"
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#include "stm32_sdmmc.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The px4_fmu-v6X board provides the following clock sources:
*
* X1: 16 MHz crystal for HSE
*
* So we have these clock source available within the STM32
*
* HSI: 16 MHz RC factory-trimmed
* HSE: 16 MHz crystal for HSE
*/
#define STM32_BOARD_XTAL 16000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE = 16,000,000
*
* PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* Subject to:
*
* 1 <= PLLM <= 63
* 4 <= PLLN <= 512
* 150 MHz <= PLL_VCOL <= 420MHz
* 192 MHz <= PLL_VCOH <= 836MHz
*
* SYSCLK = PLL_VCO / PLLP
* CPUCLK = SYSCLK / D1CPRE
* Subject to
*
* PLLP1 = {2, 4, 6, 8, ..., 128}
* PLLP2,3 = {2, 3, 4, ..., 128}
* CPUCLK <= 480 MHz
*/
#define STM32_BOARD_USEHSE
#define STM32_PLLCFG_PLLSRC RCC_PLLCKSELR_PLLSRC_HSE
/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
*
* PLL1_VCO = (16,000,000 / 1) * 60 = 960 MHz
*
* PLL1P = PLL1_VCO/2 = 960 MHz / 2 = 480 MHz
* PLL1Q = PLL1_VCO/4 = 960 MHz / 4 = 240 MHz
* PLL1R = PLL1_VCO/8 = 960 MHz / 8 = 120 MHz
*/
#define STM32_PLLCFG_PLL1CFG (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVP1EN | \
RCC_PLLCFGR_DIVQ1EN | \
RCC_PLLCFGR_DIVR1EN)
#define STM32_PLLCFG_PLL1M RCC_PLLCKSELR_DIVM1(1)
#define STM32_PLLCFG_PLL1N RCC_PLL1DIVR_N1(60)
#define STM32_PLLCFG_PLL1P RCC_PLL1DIVR_P1(2)
#define STM32_PLLCFG_PLL1Q RCC_PLL1DIVR_Q1(4)
#define STM32_PLLCFG_PLL1R RCC_PLL1DIVR_R1(8)
#define STM32_VCO1_FREQUENCY ((STM32_HSE_FREQUENCY / 1) * 60)
#define STM32_PLL1P_FREQUENCY (STM32_VCO1_FREQUENCY / 2)
#define STM32_PLL1Q_FREQUENCY (STM32_VCO1_FREQUENCY / 4)
#define STM32_PLL1R_FREQUENCY (STM32_VCO1_FREQUENCY / 8)
/* PLL2 */
#define STM32_PLLCFG_PLL2CFG (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVP2EN | \
RCC_PLLCFGR_DIVQ2EN | \
RCC_PLLCFGR_DIVR2EN)
#define STM32_PLLCFG_PLL2M RCC_PLLCKSELR_DIVM2(4)
#define STM32_PLLCFG_PLL2N RCC_PLL2DIVR_N2(48)
#define STM32_PLLCFG_PLL2P RCC_PLL2DIVR_P2(2)
#define STM32_PLLCFG_PLL2Q RCC_PLL2DIVR_Q2(2)
#define STM32_PLLCFG_PLL2R RCC_PLL2DIVR_R2(2)
#define STM32_VCO2_FREQUENCY ((STM32_HSE_FREQUENCY / 4) * 48)
#define STM32_PLL2P_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
#define STM32_PLL2Q_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
#define STM32_PLL2R_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
/* PLL3 */
#define STM32_PLLCFG_PLL3CFG (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVQ3EN)
#define STM32_PLLCFG_PLL3M RCC_PLLCKSELR_DIVM3(4)
#define STM32_PLLCFG_PLL3N RCC_PLL3DIVR_N3(48)
#define STM32_PLLCFG_PLL3P RCC_PLL3DIVR_P3(2)
#define STM32_PLLCFG_PLL3Q RCC_PLL3DIVR_Q3(4)
#define STM32_PLLCFG_PLL3R RCC_PLL3DIVR_R3(2)
#define STM32_VCO3_FREQUENCY ((STM32_HSE_FREQUENCY / 4) * 48)
#define STM32_PLL3P_FREQUENCY (STM32_VCO3_FREQUENCY / 2)
#define STM32_PLL3Q_FREQUENCY (STM32_VCO3_FREQUENCY / 4)
#define STM32_PLL3R_FREQUENCY (STM32_VCO3_FREQUENCY / 2)
/* SYSCLK = PLL1P = 480MHz
* CPUCLK = SYSCLK / 1 = 480 MHz
*/
#define STM32_RCC_D1CFGR_D1CPRE (RCC_D1CFGR_D1CPRE_SYSCLK)
#define STM32_SYSCLK_FREQUENCY (STM32_PLL1P_FREQUENCY)
#define STM32_CPUCLK_FREQUENCY (STM32_SYSCLK_FREQUENCY / 1)
/* Configure Clock Assignments */
/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
* HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
*/
#define STM32_RCC_D1CFGR_HPRE RCC_D1CFGR_HPRE_SYSCLKd2 /* HCLK = SYSCLK / 2 */
#define STM32_ACLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* ACLK in D1, HCLK3 in D1 */
#define STM32_HCLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* HCLK in D2, HCLK4 in D3 */
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
#define STM32_RCC_D2CFGR_D2PPRE1 RCC_D2CFGR_D2PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
#define STM32_RCC_D2CFGR_D2PPRE2 RCC_D2CFGR_D2PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
#define STM32_RCC_D1CFGR_D1PPRE RCC_D1CFGR_D1PPRE_HCLKd2 /* PCLK3 = HCLK / 2 */
#define STM32_PCLK3_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
#define STM32_RCC_D3CFGR_D3PPRE RCC_D3CFGR_D3PPRE_HCLKd2 /* PCLK4 = HCLK / 2 */
#define STM32_PCLK4_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timer clock frequencies */
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM15_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM16_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM17_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Kernel Clock Configuration
*
* Note: look at Table 54 in ST Manual
*/
/* I2C123 clock source */
#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
/* I2C4 clock source */
#define STM32_RCC_D3CCIPR_I2C4SRC RCC_D3CCIPR_I2C4SEL_HSI
/* SPI123 clock source */
#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
/* SPI45 clock source */
#define STM32_RCC_D2CCIP1R_SPI45SRC RCC_D2CCIP1R_SPI45SEL_PLL2
/* SPI6 clock source */
#define STM32_RCC_D3CCIPR_SPI6SRC RCC_D3CCIPR_SPI6SEL_PLL2
/* USB 1 and 2 clock source */
#define STM32_RCC_D2CCIP2R_USBSRC RCC_D2CCIP2R_USBSEL_PLL3
/* ADC 1 2 3 clock source */
#define STM32_RCC_D3CCIPR_ADCSEL RCC_D3CCIPR_ADCSEL_PLL2
/* FLASH wait states
*
* ------------ ---------- -----------
* Vcore MAX ACLK WAIT STATES
* ------------ ---------- -----------
* 1.15-1.26 V 70 MHz 0
* (VOS1 level) 140 MHz 1
* 210 MHz 2
* 1.05-1.15 V 55 MHz 0
* (VOS2 level) 110 MHz 1
* 165 MHz 2
* 220 MHz 3
* 0.95-1.05 V 45 MHz 0
* (VOS3 level) 90 MHz 1
* 135 MHz 2
* 180 MHz 3
* 225 MHz 4
* ------------ ---------- -----------
*/
#define BOARD_FLASH_WAITSTATES 2
/* SDMMC definitions ********************************************************/
/* Init 400kHz, freq = PLL1Q/(2*div) div = PLL1Q/(2*freq) */
#define STM32_SDMMC_INIT_CLKDIV (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div = PLL1Q/(2*freq)
* div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
*/
#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
# define STM32_SDMMC_MMCXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#else
# define STM32_SDMMC_MMCXFR_CLKDIV (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#endif
#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
# define STM32_SDMMC_SDXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#else
# define STM32_SDMMC_SDXFR_CLKDIV (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#endif
#define STM32_SDMMC_CLKCR_EDGE STM32_SDMMC_CLKCR_NEGEDGE
/* LED definitions ******************************************************************/
/* The PX4 FMUV6X board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
* LED_RED a Red LED, that can be controlled by software.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
* The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
/* LED definitions ******************************************************************/
/* The px4_fmu-v6x board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
* LED_RED a Red LED, that can be controlled by software.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
* The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED1 0
#define BOARD_LED2 1
#define BOARD_LED3 2
#define BOARD_NLEDS 3
#define BOARD_LED_RED BOARD_LED1
#define BOARD_LED_GREEN BOARD_LED2
#define BOARD_LED_BLUE BOARD_LED3
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
#define BOARD_LED3_BIT (1 << BOARD_LED3)
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
* include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
* events as follows:
*
*
* SYMBOL Meaning LED state
* Red Green Blue
* ---------------------- -------------------------- ------ ------ ----*/
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */
#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */
#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */
#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */
#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */
#define LED_IDLE 8 /* MCU is is sleep mode ON OFF OFF */
/* Thus if the Green LED is statically on, NuttX has successfully booted and
* is, apparently, running normally. If the Red LED is flashing at
* approximately 2Hz, then a fatal error has been detected and the system
* has halted.
*/
/* Alternate function pin selections ************************************************/
#define GPIO_USART1_RX GPIO_USART1_RX_3 /* PB7 */
#define GPIO_USART1_TX GPIO_USART1_TX_3 /* PB6 */
#define GPIO_USART2_RX GPIO_USART2_RX_1 /* PA3 */
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */
#define GPIO_USART2_RTS GPIO_USART2_RTS_2 /* PD4 */
#define GPIO_USART2_CTS GPIO_USART2_CTS_NSS_2 /* PD3 */
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
#define GPIO_UART4_RX GPIO_UART4_RX_6 /* PH14 */
#define GPIO_UART4_TX GPIO_UART4_TX_6 /* PH13 */
#define GPIO_UART5_RX GPIO_UART5_RX_3 /* PD2 */
#define GPIO_UART5_TX GPIO_UART5_TX_3 /* PC12 */
// GPIO_UART5_RTS no remap /* PC8 */
// GPIO_UART5_CTS No remap /* PC9 */
#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */
#define GPIO_USART6_TX GPIO_USART6_TX_1 /* PC6 */
#define GPIO_UART7_RX GPIO_UART7_RX_4 /* PF6 */
#define GPIO_UART7_TX GPIO_UART7_TX_3 /* PE8 */
#define GPIO_UART7_RTS GPIO_UART7_RTS_2 /* PF8 */
#define GPIO_UART7_CTS GPIO_UART7_CTS_1 /* PE10 */
#define GPIO_UART8_RX GPIO_UART8_RX_1 /* PE0 */
#define GPIO_UART8_TX GPIO_UART8_TX_1 /* PE1 */
/* CAN
*
* CAN1 is routed to transceiver.
* CAN2 is routed to transceiver.
*/
#define GPIO_CAN1_RX GPIO_CAN1_RX_3 /* PD0 */
#define GPIO_CAN1_TX GPIO_CAN1_TX_3 /* PD1 */
#define GPIO_CAN2_RX GPIO_CAN2_RX_1 /* PB12 */
#define GPIO_CAN2_TX GPIO_CAN2_TX_1 /* PB13 */
/* SPI
* SPI1 is sensors1
* SPI2 is sensors2
* SPI3 is sensors3
* SPI4 is Not Used
* SPI5 is FRAM
* SPI6 is EXTERNAL1
*
*/
#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_3 /* PG9 */
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_2 /* PB5 */
#define GPIO_SPI1_SCK ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5 */
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_3 /* PI2 */
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_4 /* PI3 */
#define GPIO_SPI2_SCK ADJ_SLEW_RATE(GPIO_SPI2_SCK_6) /* PI1 */
#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2 /* PC11 */
#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_3 /* PB2 */
#define GPIO_SPI3_SCK ADJ_SLEW_RATE(GPIO_SPI3_SCK_2) /* PC10 */
#define GPIO_SPI5_MISO GPIO_SPI5_MISO_2 /* PH7 */
#define GPIO_SPI5_MOSI GPIO_SPI5_MOSI_1 /* PF11 */
#define GPIO_SPI5_SCK ADJ_SLEW_RATE(GPIO_SPI5_SCK_1) /* PF7 */
#define GPIO_SPI6_MISO GPIO_SPI6_MISO_2 /* PA6 */
#define GPIO_SPI6_MOSI GPIO_SPI6_MOSI_1 /* PG14 */
#define GPIO_SPI6_SCK ADJ_SLEW_RATE(GPIO_SPI6_SCK_3) /* PB3 */
/* I2C
*
* The optional _GPIO configurations allow the I2C driver to manually
* reset the bus to clear stuck slaves. They match the pin configuration,
* but are normally-high GPIOs.
*
*/
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2 /* PB8 */
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2 /* PB9 */
#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_2 /* PF1 */
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_2 /* PF0 */
#define GPIO_I2C2_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN1)
#define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN0)
#define GPIO_I2C3_SCL GPIO_I2C3_SCL_1 /* PA8 */
#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2 /* PH8 */
#define GPIO_I2C3_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTA | GPIO_PIN8)
#define GPIO_I2C3_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTH | GPIO_PIN8)
#define GPIO_I2C4_SCL GPIO_I2C4_SCL_2 /* PF14 */
#define GPIO_I2C4_SDA GPIO_I2C4_SDA_2 /* PF15 */
#define GPIO_I2C4_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN14)
#define GPIO_I2C4_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN15)
/* SDMMC2
*
* VDD 3.3
* GND
* SDMMC2_CK PD6
* SDMMC2_CMD PD7
* SDMMC2_D0 PB14
* SDMMC2_D1 PB15
* SDMMC2_D2 PG11
* SDMMC2_D3 PB4
*/
#define GPIO_SDMMC2_CK GPIO_SDMMC2_CK_1 /* PD6 */
#define GPIO_SDMMC2_CMD GPIO_SDMMC2_CMD_1 /* PD7 */
// GPIO_SDMMC2_D0 No Remap /* PB14 */
// GPIO_SDMMC2_D1 No Remap /* PB15 */
#define GPIO_SDMMC2_D2 GPIO_SDMMC2_D2_1 /* PG11 */
// GPIO_SDMMC2_D3 No Remap /* PB4 */
/* The STM32 H7 connects to a TI DP83848TSQ/NOPB
* using RMII
*
* STM32 H7 BOARD DP83848TSQ/NOPB
* GPIO SIGNAL PIN NAME
* -------- ------------ -------------
* PA7 ETH_CRS_DV CRS_DV
* PC1 ETH_MDC MDC
* PA2 ETH_MDIO MDIO
* PA1 ETH_REF_CL X1
* PC4 ETH_RXD0 RX_D0
* PC5 ETH_RXD1 RX_D1
* PB11 ETH_TX_EN TX_EN
* PG13 ETH_TXD0 TX_D0
* PG12 ETH_TXD1 TX_D1
*
* The PHY address is 1, since COL/PHYAD0 features a pull up.
*/
#define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_1 /* PB11 */
#define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2 /* PG13 */
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2 /* PG12 */
/* USB
*
* OTG_FS_DM PA11
* OTG_FS_DP PA12
* VBUS PA9
*/
/* Board provides GPIO or other Hardware for signaling to timing analyzer */
#if defined(CONFIG_BOARD_USE_PROBES)
# include "stm32_gpio.h"
# define PROBE_N(n) (1<<((n)-1))
# define PROBE_1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTI|GPIO_PIN0) /* PI0 AUX1 */
# define PROBE_2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN12) /* PH12 AUX2 */
# define PROBE_3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN11) /* PH11 AUX3 */
# define PROBE_4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN10) /* PH10 AUX4 */
# define PROBE_5 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13) /* PD13 AUX5 */
# define PROBE_6 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14) /* PD14 AUX6 */
# define PROBE_7 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN6) /* PH6 AUX7 */
# define PROBE_8 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN9) /* PH9 AUX8 */
# define PROBE_9 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11) /* PE11 CAP1 */
# define PROBE_INIT(mask) \
do { \
if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
if ((mask)& PROBE_N(7)) { stm32_configgpio(PROBE_7); } \
if ((mask)& PROBE_N(8)) { stm32_configgpio(PROBE_8); } \
if ((mask)& PROBE_N(9)) { stm32_configgpio(PROBE_9); } \
} while(0)
# define PROBE(n,s) do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
#else
# define PROBE_INIT(mask)
# define PROBE(n,s)
# define PROBE_MARK(n)
#endif
#endif /*__NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H */